Need P/N 147360, the air inlet sleeve. | FerrariChat
Buy

Need P/N 147360, the air inlet sleeve.

Discussion in '348/355' started by Kaivball, Sep 3, 2008.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. Kaivball

    Kaivball Three Time F1 World Champ
    Owner

    Jan 11, 2007
    35,997
    Kalifornia
    #1 Kaivball, Sep 3, 2008
    Last edited by a moderator: Sep 7, 2017
  2. mwhitesell

    mwhitesell Formula 3

    Sep 17, 2006
    1,083
    Atlanta
    Full Name:
    Mark
    #2 mwhitesell, Sep 3, 2008

    Holy crap. At $480 bucks what is it made of gold. I see why you are looking for a used one.
     
  3. Miltonian

    Miltonian F1 Veteran

    Dec 11, 2002
    5,966
    Milton, Wash.
    Full Name:
    Jeff B.
    #3 Miltonian, Sep 3, 2008
    This looks to me like a project. Go to the hydraulic supply store, get some braided flex hose and a "T" fitting, and MAKE the darn thing. I would guess that you could make a pair of them (left and right) for less than $100, and they would last forever. The original should last forever if the non-return valve (28) doesn't fail.
     
  4. davehelms

    davehelms F1 Rookie

    Jan 3, 2004
    4,629
    Full Name:
    Dave Helms
    #4 davehelms, Sep 4, 2008
    I have 2 or 3 pairs of them for the 348.
     
  5. Kaivball

    Kaivball Three Time F1 World Champ
    Owner

    Jan 11, 2007
    35,997
    Kalifornia
    #5 Kaivball, Sep 4, 2008
    PM sent.


    Yes, I roasted TWO when the return valve failed.

    Brian made a decent replacement but they only look ok. Would like to have the original look.

    Kai
     

Share This Page