308 door mirror | FerrariChat

308 door mirror

Discussion in '308/328' started by BwanaJoe, Sep 9, 2008.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. BwanaJoe

    BwanaJoe Formula 3

    Oct 23, 2006
    1,764
    Former Space Coast
    Full Name:
    Joe Burlein
    I just got a mirror from Desire308 because the glass on my driver's mirror is "worn" on the inside. So, does anyone know how to get the glass out without breaking it? I can't seem to figure out a way to get enough room to get a small screwdriver in there. (I assume it has "clips" that release like a modern car)

    Also, the glass in his old mirror (carb car) is blued liked a modern BMW, etc. The glass on mine (QV) is not. Did they blue the glass back then or is this a replacement piece of glass? (When I asked my local glass shop about getting a blued mirror for the 308 they said no way.)
     
  2. Newman

    Newman F1 World Champ
    Consultant Owner Professional Ferrari Technician

    Dec 26, 2001
    14,473
    Canada
    Full Name:
    Newman
    The glass on my 79 US car was blue as well.
     
  3. Spitfire

    Spitfire Formula 3

    Nov 16, 2006
    1,602
    It's also blue on mine ... a 1977 308 GTB.
     
  4. tatcat

    tatcat F1 World Champ
    Owner Silver Subscribed

    Sep 3, 2001
    11,013
    panama city beach FL
    Full Name:
    rick c
    blue on my 85 us gtb
     
  5. BwanaJoe

    BwanaJoe Formula 3

    Oct 23, 2006
    1,764
    Former Space Coast
    Full Name:
    Joe Burlein
    Bump. No one has removed the glass in these things?!?!?! I really don't want to break it guessing nor replace the whole housing!
     
  6. BwanaJoe

    BwanaJoe Formula 3

    Oct 23, 2006
    1,764
    Former Space Coast
    Full Name:
    Joe Burlein
    #6 BwanaJoe, Oct 23, 2008
    Last edited by a moderator: Sep 7, 2017
    Ok, my German auto shop (Autobahn Engineering) in Melbourne (having worked on old Ferraris before) removed the glass from the extra mirror I bought from Desire308. Here is how you do it. Move the mirror to one side and insert a thin screwdriver behind the glass. Using a flashlight to check, CAREFULLY pry the ring on the mirror away from the electric mechanism in the housing. Once you get both nibs out of the slots move the mirror to the other side. Repeat. The interesting thing is that on both mirrors one of nibs broke. It appears that a dab of glue was applied to hold them in place. None of the others had any glue on them. I popped the broken ones out and will use some CA glue to put the one back in place on the mirror glass. (I may use a small dab of black rtv to hold the mirror in place once I put it back in.)

    Below are pix of the housing and mirror glass. The first glass is from my car, the second is the 2v car.
    Image Unavailable, Please Login
    Image Unavailable, Please Login
    Image Unavailable, Please Login
     
  7. miketuason

    miketuason F1 World Champ
    Owner Silver Subscribed

    Feb 24, 2006
    15,812
    Cerritos, CA.
    Full Name:
    Mike
    #7 miketuason, Oct 23, 2008
    Last edited by a moderator: Sep 7, 2017
    When you said pry the ring on the mirror, is that ring made of metal or plastic.
    Do you have pic of the ring? I also need to change my mirror too, here's why
    pic below shows where the red arrow is crack from top to bottom edge.
    I'm still looking for a replacement. Anybody got extra one?:)
    Image Unavailable, Please Login
     
  8. BigTex

    BigTex Seven Time F1 World Champ
    Owner Rossa Subscribed

    Dec 6, 2002
    79,386
    Houston, Texas
    Full Name:
    Bubba
    While maybe not "blue" I have had local glass shops cut replacement mirrors for my Vitalonis.

    Heck, one of them eve bounced once without breaking, and was reglued last week!

    I'd take the glass fragments in and try that o your cracked one..............good post JOe....
     
  9. miketuason

    miketuason F1 World Champ
    Owner Silver Subscribed

    Feb 24, 2006
    15,812
    Cerritos, CA.
    Full Name:
    Mike
    Thanks BigTex, I'll try my local glass shop. Although it would be nice to have the "blue" mirror.
     
  10. BwanaJoe

    BwanaJoe Formula 3

    Oct 23, 2006
    1,764
    Former Space Coast
    Full Name:
    Joe Burlein
    #10 BwanaJoe, Oct 24, 2008
    Last edited: Oct 24, 2008
    If you look on the mirror glass picture above you will see the circle attached to the backing. It is plastic. That broken line on your mirror is from someone trying to remove it. That is what will happen if you try to remove the mirror from one side only (I know because that is what my old one looks like!).

    As far as a mirror replacement, try Patrick at FerrParts. They have a destroyed QV on site.

    As far the blue mirror thing I really try hard enough I think. Plenty of European cars have that blue tinted glass now-a-days. I'm sure had I poked around harder (or talked to my German car mechanic) I could have found someone will to cut the correct color.
     
  11. miketuason

    miketuason F1 World Champ
    Owner Silver Subscribed

    Feb 24, 2006
    15,812
    Cerritos, CA.
    Full Name:
    Mike
    Thanks Joe,I see what you mean, but I'm not going to take off mine just yet until I have a replacement.
     
  12. BwanaJoe

    BwanaJoe Formula 3

    Oct 23, 2006
    1,764
    Former Space Coast
    Full Name:
    Joe Burlein
    I don't blame you in the least. BTW, I seemed to have been a bit asleep this morning. It should have read:

    "As far as the blue mirror thing, I didn't really try hard enough I think. Plenty of European cars have that blue tinted glass now-a-days. I'm sure had I poked around harder (or talked to my German car mechanic) I could have found someone who would cut the correct color of glass."
     
  13. BwanaJoe

    BwanaJoe Formula 3

    Oct 23, 2006
    1,764
    Former Space Coast
    Full Name:
    Joe Burlein
    #13 BwanaJoe, Mar 27, 2009
    Last edited: Mar 27, 2009
    As an update to this saga, make sure, if you replace the glass, that you silicone BOTH sides of the inner plastic mirror glass housing. While cleaning one day I ended up popping out the glass on the siliconed side (not enough there I guess). It also broke the other nib off on that same side. So, I siliconed the snot out of it and stuck the other nibs back in. For some reason they don't want to hold. So, I am doing the other side with silicone also.
     

Share This Page