Someone looking for a GT4? | FerrariChat
Buy

Someone looking for a GT4?

Discussion in 'Northwest' started by Jdubbya, Oct 14, 2008.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

Page 1 of 3
  1. Jdubbya

    Jdubbya The $10 Trillion Man
    Silver Subscribed

    Dec 28, 2003
    43,205
    PNW
    Full Name:
    John
    #1 Jdubbya, Oct 14, 2008
    Wasn't there someone looking for a local 308 GT4 not long ago? I searched for the post but I'll be darned if I can find it. I can't remember if it was someone local or maybe it was posted in another forum??

    The car I thought I had contact info for is back up on craigslist for what looks to be a decent price. I talked with the owner last time he had it up, seems to be pretty legit and honest, but I can't personally vouch either.

    Here's the ad http://seattle.craigslist.org/kit/cto/877028758.html


    No affiliation, no personal interest yadda yadda yadda.....just thought I remembered somebody looking for one.


    John
     
  2. detailjohn

    detailjohn Karting

    Sep 4, 2008
    219
    Bellevue, WA
    Full Name:
    John
    #2 detailjohn, Oct 14, 2008
    That seems like a screaming deal, BUT it does look like it will require lots of work.



    John
     
  3. Jdubbya

    Jdubbya The $10 Trillion Man
    Silver Subscribed

    Dec 28, 2003
    43,205
    PNW
    Full Name:
    John
    #3 Jdubbya, Oct 14, 2008

    It sounds like he's done a lot of mechanical work but it also sounds like it needs body work. If I had more room and more play money I'd go look at it. I think last time he had it closer to $18-19K. Sounds like a "motivated" seller.
     
  4. dinogt4guy

    dinogt4guy F1 Rookie

    Oct 31, 2004
    3,411
    Hewitt, Tx.
    Full Name:
    Kurtis Fordice
    #4 dinogt4guy, Oct 14, 2008
    Looks like a smok'in deal to me!!!
     
  5. Jonny Law

    Jonny Law F1 Rookie
    Silver Subscribed

    May 6, 2008
    3,203
    Over yonder.
    Full Name:
    IT Guy
    #5 Jonny Law, Oct 14, 2008
    Project car.
     
  6. Ed_Long

    Ed_Long Formula Junior

    Nov 11, 2003
    686
    Salem, Oregon USA
    Full Name:
    Ed Long
    #6 Ed_Long, Oct 15, 2008
    White with a red interior. Yuuck !
     
  7. flaviaman

    flaviaman Formula Junior

    Jul 26, 2005
    318
    Vernonia, OR
    Full Name:
    Gregg
    #7 flaviaman, Oct 15, 2008
    I have personal knowledge of this car, it is more than "a little" rusty...think doors, think quarter panels. One should not think of this as a ropey $15K car, but rather a (potential) nice $45K car.

    Most "cheap" Ferrari's end up being very expensive!
     
  8. Tad Cody

    Tad Cody Formula 3

    Sep 9, 2006
    1,094
    Over here!
    Full Name:
    Take a guess...
    #8 Tad Cody, Oct 15, 2008
    If you can't afford a good, well-maintained Ferrari, you really can't afford a poorly maintained one!

    -Tad
     
  9. Jdubbya

    Jdubbya The $10 Trillion Man
    Silver Subscribed

    Dec 28, 2003
    43,205
    PNW
    Full Name:
    John
    #9 Jdubbya, Oct 15, 2008
    I kind of suspected that would be the case with the price and this being at least the second time he listed it. I would think if it wasn't that bad to fix, someone would have snapped it up.

    Of course if the interior and mechanicals are rebuilt like he says the body work COULD be taken care of for a reasonable price. Still $15k for the car plus $10-15K for body work and you'd still be pretty upside down on the car.

    OH, and you don't have to tell me about "cheap" Ferrari's ending up expensive, I have one in my garage right now!!
     
  10. cptdpt

    cptdpt Rookie

    Aug 22, 2008
    48
    ZG CO US
    Full Name:
    Jaz Kokeny
    #10 cptdpt, Oct 15, 2008
    By $45K, do you mean what you'd have into it or what it's potentially worth? Could this car, with its not-too-exciting 62K miles (on the chassis, gearbox, etc.), ever be that nice? I have to think there are better candidates out there.
     
  11. Spasso

    Spasso F1 World Champ

    Feb 16, 2003
    14,656
    The fabulous PNW
    Full Name:
    Han Solo
    #11 Spasso, Oct 15, 2008
    I doubt it would ever be worth 45k unless you spent 55/60 to get it there and even then you would be hard pressed to find someone that would pay that much for a GT4 unless it was a factory restoration, (and I LIKE GT4's)
     
  12. Spasso

    Spasso F1 World Champ

    Feb 16, 2003
    14,656
    The fabulous PNW
    Full Name:
    Han Solo
    #12 Spasso, Oct 15, 2008
    He says it is running terribly rich at the moment, kiss those new rings goodbye then. And why would a freshly rebuilt engine have a leaky pan gasket? Come on! If they can't get the pan gasket to seal what's the rest like?
     
  13. bjwhite

    bjwhite F1 Rookie
    Silver Subscribed

    Mar 17, 2006
    4,806
    Seattle, WA
    Full Name:
    Brian White
    #13 bjwhite, Oct 16, 2008
    Get it cheap...drive the piss out of it. Who cares about fixing rust? Sheesh. Turn it into a track day ***** even!
    Not every Ferrari (or car for that matter) needs "restoration".
     
  14. dinogt4guy

    dinogt4guy F1 Rookie

    Oct 31, 2004
    3,411
    Hewitt, Tx.
    Full Name:
    Kurtis Fordice
    #14 dinogt4guy, Oct 16, 2008
    The high end on the NADA is 35.9K There are 3 in Hemmings between 26-30K. If they are concourse quality they can go for much more.

    Cheers!
     
  15. Boat Captain

    Boat Captain Rookie

    Aug 1, 2008
    27
    #15 Boat Captain, Oct 18, 2008

    Could you briefly elaborate, please?

    Thx,

    Tom
     
  16. Spasso

    Spasso F1 World Champ

    Feb 16, 2003
    14,656
    The fabulous PNW
    Full Name:
    Han Solo
    #16 Spasso, Oct 18, 2008
    Running terribly rich (bordering on flooding?) on a fresh engine "washes" the cylinders (of oil), possibly compromising the break in process and/or longevity of the rings and/or cylinder bores, leaves heavy carbon deposits on the valves and in the combustion chambers, also the exhaust. It also dilutes and contaminates the oil.

    It is just as damaging to older engines.

    Hopefully this hasn't been going on too long.
     
  17. bjwhite

    bjwhite F1 Rookie
    Silver Subscribed

    Mar 17, 2006
    4,806
    Seattle, WA
    Full Name:
    Brian White
    #17 bjwhite, Oct 28, 2008
    So what ever happened to this GT4? Tried to contact the owner but they never got back to us......
     
  18. dinogt4guy

    dinogt4guy F1 Rookie

    Oct 31, 2004
    3,411
    Hewitt, Tx.
    Full Name:
    Kurtis Fordice
    #18 dinogt4guy, Oct 28, 2008
    I don't see it listed anymore, possibly sold.

    Cheers!
     
  19. MordaloMVD

    MordaloMVD F1 Rookie

    Sep 7, 2005
    4,222
    WA
    Full Name:
    Michael von Ditter
    #19 MordaloMVD, Oct 28, 2008
    That was the second go aground for that car. The other question that came up when I talked to Jdubba about this this weekend is this. With a brand new rebuild, why is the pan gasket leaking? If they got that wrong, what else got "missed"?
     
  20. dinogt4guy

    dinogt4guy F1 Rookie

    Oct 31, 2004
    3,411
    Hewitt, Tx.
    Full Name:
    Kurtis Fordice
    #20 dinogt4guy, Oct 29, 2008
    It happens. You mean to tell me that no one has ever had any work done at the dealer or at their mechanic's and it has allways turned out 100% perfect every time? Don't make me laugh! I'm not saying this is the case here, but really.
     
  21. Choptop

    Choptop F1 Rookie

    Aug 15, 2004
    4,455
    Carmichael, CA
    Full Name:
    Alan Galbraith
    #21 Choptop, Dec 3, 2008
    Last edited by a moderator: Sep 7, 2017
    Its back....

    Image Unavailable, Please Login
    Image Unavailable, Please Login
    Image Unavailable, Please Login
     
  22. MordaloMVD

    MordaloMVD F1 Rookie

    Sep 7, 2005
    4,222
    WA
    Full Name:
    Michael von Ditter
    #22 MordaloMVD, Dec 3, 2008
    How much this time?
     
  23. Spasso

    Spasso F1 World Champ

    Feb 16, 2003
    14,656
    The fabulous PNW
    Full Name:
    Han Solo
    #23 Spasso, Dec 3, 2008
    We are talking about FLAT gasket between two machined pieces of cast aluminum. If a mechanic can't get that to seal what is the more complicated stuff going to be like? .............really!
     
  24. Jonny Law

    Jonny Law F1 Rookie
    Silver Subscribed

    May 6, 2008
    3,203
    Over yonder.
    Full Name:
    IT Guy
    #24 Jonny Law, Dec 3, 2008
  25. Miltonian

    Miltonian F1 Veteran

    Dec 11, 2002
    5,966
    Milton, Wash.
    Full Name:
    Jeff B.
    #25 Miltonian, Dec 3, 2008
    Last edited by a moderator: Sep 7, 2017
    Did you see the 308 GT4 in Spokane on Craig's List last week? The owner claimed that it does 0-60 in 4.2 seconds, and gets 26 MPG on the freeway.
    Image Unavailable, Please Login
     
Page 1 of 3

Share This Page