360 wheel package on a 355

i recently purchased a 98355f1 b car. the tires on the car need to be replaced soon. i have an oppurtunity to purchase a set of 360
wheels and tires with minimal tire wear for a price that would equal buying new tires for my 355 rims. will the 360 wheel tire package
bolt on to my 355 with no issues. are the tire sizes and offsets correct. the 360 tire sizes are 215/ 40 frt. and 275/40 rear.
any help would be appreciated.

 

Forget it, the 360 starfish wheels look like crap

 

I personally think the 355 rim is one of the most handsome in recent years. I wouldn't consider an exchange for 360 rims to be a trade up by any stretch.

But if you do....PM me - I'd like to buy your 355 rims.

 

I agree

the factory/stock 355 wheels are some of the best looking wheels I have seen...........

 

Without a doubt the standard 355 wheels look the best on the 355. Even compared to the aftermarket wheels that many put on there cars. No non standard wheel has come close to looking so right on the 355 as the standard units.IMO. (Borrowed picture)
Image Unavailable, Please Login

 

+1. There is nothing stopping you from increasing the tire width. Do a search. I believe some FChatters have even increased to 235 (f) and 295 (r).

 

I guess I'm in the minority here, because I love the 360 wheels. They are a huge improvement on my 348. (But I would have gladly opted for 355 wheels, too, but I prefer the 360 wheels). On a 355, however, the rear wheels will not fit well. The 355 had an improved wider track than the 348, and the 360 wheels will therefore stick out too far. I guess you could get a slightly smaller tire size for the 360 wheel, but then you'd be defeating your purpose of getting a cheap set of tires along with your wheel upgrade.

 

I actually like the 360 wheels just fine, myself. But if I already had 355 rims, I think I'd just keep em on.

 

Rudy, I'm not passing judgment on what looks best, etc. as you know what they say about beauty. But, there is a big offset diff. between the 360 and the 355 and they will not fit.

Just as an FYI, I have 295s on the rear of stock 355 wheels.

 

+1 ..... I have seen 360 wheels on a 355 and the offset was waaay off!!! They stuck out about 2" too far. They looked ridiculous .

The 355 wheels look timeless and being magnesium makes them far lighter than most aftermarket wheels too !

 

Oz----you need to pick up a 355 CH wheel---I could not believe how much lighter they feel than the stock 355 wheel...

 

I considered some challenge wheels in the past but thought they were the same as standard 355 wheels. Though I never tried lifting them side by side ................... are the 355ch wheels the same widths as standard??

 

Yes and they feel like half the weight..When I get my car started I will get the extra set of stock wheels out and weigh both sets

 

The CH wheels are wider both front and rear...

 

Hey Bruce !!! Good to see ya posting again!! So how much wider are these ch wheels?

 

WHAT????????????

 

OK---Here are the facts, just weighed one front and one rear CH wheel. The front is 19lbs and the rear is 20lbs. Also here are some pics of the widths...What are the stock wheel widths? 8" and 10"?
Image Unavailable, Please Login
Image Unavailable, Please Login
Image Unavailable, Please Login
Image Unavailable, Please Login

 

I could be wrong, but I think rim widths are measured from the inside of the wheel lip/beadseat.

So judging from those pics you so nicely posted, I would gather the fronts are 8" wide and the rears are 10" wide. That is the same widths as stock ............... I wonder if there are different versions of challenge wheels ???

 

+1 Width is measured from the bead seat.

Never mind these little challenge rims, get some 19"s















I also prefer the factory 355 rim to the 360 star rim.

 

Just curious: has anybody painted their 355 wheels black ? Pics ?

 

Click on the scarey face above

285Ferrari

 

So if you figure in that, the wheels appear to be maybe a 1/2" wider than a stock wheel?

 

Yes and they are for sale!!! I have CH wheels I am putting on the car!!

 

LOL!!!!!!!!

 

Yes......

Robbie, be sure to take some before and after pics of your CH wheels so you can post the transformation.

Did you get that street insert out??? If need be I'll come over and help you push that dead horse out of the garage so you can get into the attic..lol