Unbreakable Temp/Vent/Choke Lever Bezels at Last!!!! | Page 7 | FerrariChat
Buy

Unbreakable Temp/Vent/Choke Lever Bezels at Last!!!!

Discussion in 'Technical Q&A' started by Verell, Mar 16, 2006.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

Page 7 of 9
  1. Verell

    Verell F1 Veteran
    Consultant Owner

    May 5, 2001
    7,022
    Groton, MA
    Full Name:
    Verell Boaen
    #151 Verell, Oct 20, 2008
    They went out today, the US rep just sent me the UPS tracking #. I expect to receive them Friday or Saturday. As soon as I have the exact date they're arriving, I'll make up labels & they'll go out the next day!! Best guess is that they'll ship next Monday, but there's a chance they'll go out Saturday.

    I've ordered a reasonable amount of extra ones, so if anyone needs a bezel, feel free to send me an order. Price is $129/bezel with FREE shipping! See post #133 in this thread for ordering info.

    I also have unscratchable label sets on the shelf for all Ferrari models that used these labels. See this thread:
    http://www.ferrarichat.com/forum/showthread.php?t=199364
     
  2. mwr4440

    mwr4440 Five Time F1 World Champ
    Rossa Subscribed

    Jun 8, 2007
    57,946
    Bavaria, The 'Other' Germany
    Full Name:
    Mark W.R.
    #152 mwr4440, Oct 20, 2008
    Verell,

    Save me one. I'll get hold of you soonest.
     
  3. Verell

    Verell F1 Veteran
    Consultant Owner

    May 5, 2001
    7,022
    Groton, MA
    Full Name:
    Verell Boaen
    #153 Verell, Oct 21, 2008
    Mark, will do.
     
  4. Verell

    Verell F1 Veteran
    Consultant Owner

    May 5, 2001
    7,022
    Groton, MA
    Full Name:
    Verell Boaen
    #154 Verell, Oct 25, 2008
    The bezels arrived on schedule Thursday PM. The production bezels look even better than the final production sample!

    PRE-ORDERS SHIPPED:
    I packed up all the pre-orders yesterday & they went out via USPS Priority Mail this AM. You should have them Wednesday or Thursday.

    Yes, I have plenty of bezels and label sets in stock, orders welcome :D
     
  5. DinoDriver

    DinoDriver Formula Junior

    Mar 14, 2005
    537
    Leesburg, VA
    Full Name:
    Bill Ebert
    #155 DinoDriver, Oct 26, 2008
    Verell,

    I'm all done with my Dino rear reflector bezel group buy & sale. Went well and all were happy with the results. Any chance you will be doing bezel labels for us Dino owners? I suspect lots of 206/246 Forum folks would be interested. We've discussed it before.

    Bill
     
  6. Verell

    Verell F1 Veteran
    Consultant Owner

    May 5, 2001
    7,022
    Groton, MA
    Full Name:
    Verell Boaen
    #156 Verell, Oct 28, 2008
    You want the 'Older Cars' lable set (had to call them something :D) , see post #17 in this thread:
    http://www.ferrarichat.com/forum/showthread.php?t=199364

    They've been available since June.
     
  7. DinoDriver

    DinoDriver Formula Junior

    Mar 14, 2005
    537
    Leesburg, VA
    Full Name:
    Bill Ebert
    #157 DinoDriver, Oct 29, 2008
    Well, Drats! I've been subscribed to the wrong thread! Dah! I'll order soon - - good winter project. Have you thought about advertising the bezels and the labels in the monthly FCA NewsBulletin classified? It's free if you are a member and it goes to around 5000 members.

    Bill
     
  8. Verell

    Verell F1 Veteran
    Consultant Owner

    May 5, 2001
    7,022
    Groton, MA
    Full Name:
    Verell Boaen
    #158 Verell, Dec 24, 2008
    I've got the disc knob mold designed on my CAD system. Have started machining the inserts that form the slots the levers slip into. PITA bit of precision machining & have to polish to a mirror finish. Spent a day on 1st one & discovered it was a several thou undersize after polishing. Will get back on it after the holidays.

    re: recent PMs
    Yes, the lever bezels & labels are in stock for immediate shipment.

    Bezel price is $129/bezel with FREE shipping! See post #133 in this thread for ordering instructions.

    Label pricing & info varies with your car, see the latest posts to this thread:
    http://www.ferrarichat.com/forum/showthread.php?t=199364
     
  9. KershIrl

    KershIrl Karting

    Aug 10, 2004
    92
    Dublin, Ireland
    Full Name:
    Stephen
    #159 KershIrl, Dec 29, 2008
    Last edited: Dec 29, 2008
    Hi ,

    Any plans to do the levers? I broke my rh heater lever on my 76 308 GTB, and need a new one, ideally Ill replace all of them.
     
  10. Verell

    Verell F1 Veteran
    Consultant Owner

    May 5, 2001
    7,022
    Groton, MA
    Full Name:
    Verell Boaen
    #160 Verell, Dec 30, 2008
    Last edited: Dec 30, 2008
    The OEM plastic bezels will break long before the lever fails. If convenient, please post a picture of the broken lever, I'd like to see how it failed.

    Are you sure it's the lever that broke & not the tab on the bezel's back that has the pivot hole for the lever?

    The levers are readily available used in very good condition for small $ from just about any place that parts out 3x8s. I think I'd just be competing with the breakers, so have no plans to make the levers at this time.
     
  11. BillyD

    BillyD Formula 3
    Silver Subscribed

    Feb 28, 2004
    1,828
    Pacific Northwest
    Full Name:
    Bill
    #161 BillyD, Jan 7, 2009
    Last edited by a moderator: Sep 7, 2017
  12. tazandjan

    tazandjan Three Time F1 World Champ
    Lifetime Rossa Owner

    Jul 19, 2008
    39,163
    Clarksville, Tennessee
    Full Name:
    Terry H Phillips
    #162 tazandjan, Jan 7, 2009
    Billy- Those look way better than brand new ones the day the car rolled out of the factory.

    Taz
    Terry Phillips
     
  13. DinoDriver

    DinoDriver Formula Junior

    Mar 14, 2005
    537
    Leesburg, VA
    Full Name:
    Bill Ebert
    #163 DinoDriver, Jan 7, 2009
    Billy, beautiful! Fantastic improvement. I've got the bezels and labels for my Dino. It's one of my winter projects starting in a few days. Please tell me more about the teflon cable - - recommended brand, source. Black? Are these normally for bikes?

    Bill
     
  14. BillyD

    BillyD Formula 3
    Silver Subscribed

    Feb 28, 2004
    1,828
    Pacific Northwest
    Full Name:
    Bill
    #164 BillyD, Jan 7, 2009
    Last edited: Jan 7, 2009
    Teflon cable housing was mentioned in previous threads along with mail order sources however since I didn't plan this very well I just stopped by the local bicycle shop & paid $2 bucks a foot for teflon lined shifter cable housing. Works so smooth the springs on the carbs pull the choke off themselves so I have to hold the choke on. Its black, looks just like the original, & slid right thru the tube from eng compartment to passenger compartment. I re used the original choke cable/wire after a little sanding , cleaning & silicon spray.
     
  15. DinoDriver

    DinoDriver Formula Junior

    Mar 14, 2005
    537
    Leesburg, VA
    Full Name:
    Bill Ebert
    #165 DinoDriver, Jan 9, 2009
    Billy, I never thought I'd see the day that someone says this about the choke cable: "Works so smooth the springs on the carbs pull the choke off themselves so I have to hold the choke on." Amazing! I can hardly wait to start this project and see similar results on the Dino, hopefully. Much thanks for the info. Enjoy!

    Bill
     
  16. synchro

    synchro F1 Veteran

    Feb 14, 2005
    9,294
    CHNDLR
    Full Name:
    Scott
    #166 synchro, Aug 21, 2009
    Is the choke lever bezel the same size as the heat/temp bezel on the 1973 series 246 GTS Dino?

    Thanks





    They turned out very well!
     
  17. finnerty

    finnerty F1 World Champ

    May 18, 2004
    10,406
    #167 finnerty, Aug 21, 2009
    Those look great!

    But, NOTHING is UNBREAKABLE ---- give me one of those beauties for a day, and I'll break it for 'ya!!:)
     
  18. DinoDriver

    DinoDriver Formula Junior

    Mar 14, 2005
    537
    Leesburg, VA
    Full Name:
    Bill Ebert
    #168 DinoDriver, Aug 21, 2009
    Scott, I finished my cockpit re-do in April, which included replacing all 4 bezels and labels that came from Verell. Those babies are little works of art. The choke bezel was the same as the other 3 on my '74 Dino. Odds are very high that would apply to a '73 as well. Btw, my choke cable had seized inside the original wire-wrapped sheathing so I went to my local John Deere dealer with the old cable in hand and bought one of their universal choke cable assemblies, about $28. The black plastic sheathing O.D. is perfect, it has a white plastic liner (Teflon-like) and the center metal wire is precisely the right O.D. for the attachment point on the carb choke control mechanism. For the first time in 32 years, I can actually control the chokes. I'll rarely use them, but I know when I do, they will operate correctly.

    Have fun,

    Bill
     
  19. Verell

    Verell F1 Veteran
    Consultant Owner

    May 5, 2001
    7,022
    Groton, MA
    Full Name:
    Verell Boaen
    #169 Verell, Aug 22, 2009
    Scott, to the best of my knowledge the '73 Dinos used the same bezels as the '74 Dinos.

    BTW, just received another mfg. run, the bezels are now back in stock. My machine shop was able to hold the current price for this batch, but I was warned that most likely the price would go up next time ordered them.
     
  20. synchro

    synchro F1 Veteran

    Feb 14, 2005
    9,294
    CHNDLR
    Full Name:
    Scott
    #170 synchro, Aug 27, 2009
    Last edited: Aug 27, 2009
    Hey, I bought Bill's SSteel Dino rear reflector housing Bezels so these are right up my alley!

    If I order 4 bezels and the "vintage" unscratchy labels may i combine the free shipping?

    email sent to: Orders@ UnobtainiumSupply. com
    THX
     
  21. synchro

    synchro F1 Veteran

    Feb 14, 2005
    9,294
    CHNDLR
    Full Name:
    Scott
    #171 synchro, Aug 27, 2009
    Since folks will probably buy these in matching sets of Bezels PLUS labels, thought of making it a grouping?

    Then again, this just might be a solicitous act to push this thread to the top of the heap.
     
  22. h00kem

    h00kem Guest

    Dec 15, 2004
    734
    Texas
    #172 h00kem, Aug 28, 2009
    Beautiful job! Did you have to source the black switch knobs too? If so, where did you find them?
     
  23. BillyD

    BillyD Formula 3
    Silver Subscribed

    Feb 28, 2004
    1,828
    Pacific Northwest
    Full Name:
    Bill
    #173 BillyD, Aug 28, 2009
    My switch knobs were in good condition, I thought Verell was making them though.
    Bill
     
  24. DinoDriver

    DinoDriver Formula Junior

    Mar 14, 2005
    537
    Leesburg, VA
    Full Name:
    Bill Ebert
    #174 DinoDriver, Aug 28, 2009
    Last edited by a moderator: Sep 7, 2017
    Scott, those reflector bezels aren't SSteel, they are polished Al. Mine have been on for about 6 mos. (about 1000 miles) and look great. I polished them once with Mother's Al Polish.
    Btw, on a recent long weekend trip (about 700 miles) into the mountains of West Virginia with 21 other exotics, I turned 70,000 miles on the Dino. Attached is a pix taken at a scenic overlook near Snowshoe, WV - - Dino with "non-concours" wheels and Bridgestone 225/50ZR-16s

    Bill
    Image Unavailable, Please Login
     
  25. Verell

    Verell F1 Veteran
    Consultant Owner

    May 5, 2001
    7,022
    Groton, MA
    Full Name:
    Verell Boaen
    #175 Verell, Aug 28, 2009
    Hi Scott,
    I'm traveling with very limited internet access until 14 Sept I'll try to respond to your eMAIL & PMs, but it may not happen till I'm back home. Tonight I seem to have web page but not email access(sigh).

    Yes, I'll combine the 'free' shipping for a set of 4 bezels + a set of labels.
     
Page 7 of 9

Share This Page