1/43 Kit Building Tips Needed | FerrariChat
Buy

1/43 Kit Building Tips Needed

Discussion in 'Collectables, Literature, & Models' started by Gerry328, Jan 20, 2009.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. Gerry328

    Gerry328 Formula 3
    Silver Subscribed

    Sep 25, 2006
    2,486
    Home
    Full Name:
    Gerry
    #1 Gerry328, Jan 20, 2009
    After looking for many years I finally found the 1/43 kits of the Ferrari 512 (BBR) and Porsche 917 (Profil 24) from the Steve McQueen file LeMans. While I have built many plastic models, I do not have a lot of experience with metal 1/43 kits.

    I would appreciate any advice and tips on building these kits.

    Thanks, Gerry
     
  2. the_stig

    the_stig F1 Rookie

    Sep 19, 2005
    3,497
    #2 the_stig, Jan 20, 2009
  3. Camoradi

    Camoradi Karting

    Jun 12, 2006
    81
    Peak District, UK
    Full Name:
    Steve Barnett
    #3 Camoradi, Jan 21, 2009
    As with the link posted by the stig, the 'World of 43rd' is a nice little booklet and should give all the details you need.

    I would strongly suggest you start with the 'simple' 512 first, and perhaps build a few more before starting on the Profil Porsche 917 (it is one of those kits that ideally needs 'rectification' throughout). The basic rules are always use a sharp blade in your scalpel and try to avoid model paints except for detailing (use aerosol auto primer and top coat for the major parts). If you get stuck you could PM me or ask again on the forum.

    Steve
     
  4. Arjan

    Arjan Karting

    Oct 27, 2005
    92
    The Netherlands
    Full Name:
    Arjan de Roos
    #4 Arjan, Jan 29, 2009

Share This Page