Torquing the wheels on a 348 | FerrariChat

Torquing the wheels on a 348

Discussion in '348/355' started by AceMaster, May 15, 2009.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. AceMaster

    AceMaster Three Time F1 World Champ

    Feb 6, 2009
    34,548
    Ontario, Canada
    Full Name:
    Mike
    #1 AceMaster, May 15, 2009
    Last edited: May 15, 2009
    Can anybody tell me what the correct or ideal torque measurement is when re-installing the wheels on a 348? They are the stock wheels, I am not sure if that makes a difference. With previous cars that had aluminum wheels, I recall tightening them and then re-torquing after a day or two of driving - would it be the same procedure on the 348, or just tighten and torque once upon re-installing?

    thanks
     
  2. stevew

    stevew Formula 3

    Jun 9, 2002
    1,839
    uk
    Full Name:
    Steve
  3. AceMaster

    AceMaster Three Time F1 World Champ

    Feb 6, 2009
    34,548
    Ontario, Canada
    Full Name:
    Mike
    awesome, thanks...
     
  4. vvassallo

    vvassallo F1 Veteran
    Silver Subscribed

    Aug 4, 2006
    8,281
    Palos Verdes
    Full Name:
    Vince V
    I use 75 since it's easier to read on my torque wrench. :p. Just don't let anyone talk you into 90!
     
  5. PAP 348

    PAP 348 Nine Time F1 World Champ
    Lifetime Rossa Owner

    Dec 10, 2005
    99,162
    Mount Isa, Australia
    Full Name:
    Pap
    Yeah, who was that dude? :eek::eek:
     

Share This Page