QV Euro valance and side marker project. | FerrariChat
Buy

QV Euro valance and side marker project.

Discussion in '308/328' started by thecarreaper, Jul 10, 2009.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. thecarreaper

    thecarreaper F1 World Champ
    Silver Subscribed

    Sep 30, 2003
    18,070
    Savannah
    #1 thecarreaper, Jul 10, 2009
    Last edited by a moderator: Sep 7, 2017
    i bought a euro valance from Rennspeed motorsports. they have them on ebay for $485 plus shipping, and i thought that was a great deal, so i went for it. Peter at Rennspeed Motorsports is a real class act, and the part i received is of great quality.


    http://cgi.ebay.com/ebaymotors/Ferrari-308-Euro-Front-Spoiler-Lower-Valance-New_W0QQcmdZViewItemQQ_trkparmsZQ7c293Q3a1Q7c294Q3a30QQ_trksidZp4634Q2ec0Q2em14Q2el1262QQhashZitem1c0889833cQQitemZ120402314044QQptZMotorsQ5fCarQ5fTruckQ5fPartsQ5fAccessories


    my car is a euro, sold new to Germany. i wanted to add the deep euro valance, and switch my marker lights in the front at least to the small round style.

    the valance install is almost done, i will finish drilling the holes and the fitting work today, and then send the car disassembled to the paint shop.

    my amber turn signals came from a Fiat place, and they are the same carrello type lights all the early Ferraris seemed to wear in the 70s and 80s. what i find really odd, is that my car was drilled front and rear for the USA large side marker lights. i cannot find any holes or evidence of patches anywhere on the fenders front or rear of the tires.

    the fender holes for the USA lights may have been drilled with a template, that enlarged the smaller holes for the round lights, but i would have thought the stud holes for the round amber light would still be visible. it appears that is not the case, so i am going to just leave the front side markers alone, and not use the round ones. :(

    i just finished my cooling hoses, and am working on the heater hoses, which is why i took so much of the front end apart.

    i will add more pics as the project continues.


    if anybody knows a place that has new lenses for the cibie airport 35 flash to pass lights i would love to know. Daniel Stern has the lights, but i dont want to spend $250 for new lights and lenses, when i only need lenses. i think i may put yellow lenses on if i can find them, since these are not used as fog lights, and are just there for looks here in the USA.

    i fixed my ebay account, as i have the blue trans am for sale to make room for a GT4 when the time comes. i will look on ebay for lenses, but i have not been a fan of ebay, so i do so with some trepidation.

    pics:


    edit added a "before pic" with the shallow valance.
    Image Unavailable, Please Login
    Image Unavailable, Please Login
    Image Unavailable, Please Login
    Image Unavailable, Please Login
    Image Unavailable, Please Login
    Image Unavailable, Please Login
    Image Unavailable, Please Login
    Image Unavailable, Please Login
    Image Unavailable, Please Login
     
  2. thecarreaper

    thecarreaper F1 World Champ
    Silver Subscribed

    Sep 30, 2003
    18,070
    Savannah
    #2 thecarreaper, Jul 28, 2009
    Last edited by a moderator: Sep 7, 2017
    received the valance back from the paint shop this evening, and the install is almost complete. i have a few small things to adjust and it should be done!
    Image Unavailable, Please Login
     
  3. GTVeloce

    GTVeloce Karting

    Jul 19, 2009
    207
    Kauai Hawaii
    Full Name:
    Dennis
    #3 GTVeloce, Jul 28, 2009
    Looks good to me! I'm curious, when you're doing this much work on a Euro car, why don't you remove the USA side markers? I had a gray market BMW 635 CSi, and it looked so much better after I removed the DOT side markers. Just MO of course! Dennis
     
  4. thecarreaper

    thecarreaper F1 World Champ
    Silver Subscribed

    Sep 30, 2003
    18,070
    Savannah
    #4 thecarreaper, Jul 28, 2009
    the holes i have for the USA side markets are too big to go back to the round euro lights. i would have to have metal welded to the fenders, and i dont want tons of paint work on the car.

    it is what it is at this point.
     
  5. Neonzapper

    Neonzapper F1 Rookie

    Oct 19, 2008
    2,580
    MD/FL/Philippines
    Full Name:
    Mykol
    #5 Neonzapper, Jul 28, 2009
    Last edited: Jul 28, 2009
    That is exactly what I wanted to do with my Euro...take off the American Federalized rectangle side marker lights, and put those original round Euro markers back on it. Now, I'm disappointed to learn the holes are too big for the Euro lights. Dang!

    Your car looks fantastic btw!
     
  6. GTVeloce

    GTVeloce Karting

    Jul 19, 2009
    207
    Kauai Hawaii
    Full Name:
    Dennis
    #6 GTVeloce, Jul 29, 2009
    Yes, it does require some paintwork. I was lucky; a lady dinged me in a parking lot. While the rear quarter panel was being repaired, I had the body shop weld up the side marker holes. For the front I had to pay for it myself, but it was worth it to me to clean up the look of the car. I suppose that once it's done we could get in trouble from the government. A risk I was willing to take...
     
  7. hanknum

    hanknum Formula 3

    Nov 1, 2003
    2,050
    Santa Barbara
    Full Name:
    Henry
    #7 hanknum, Jul 29, 2009
    FYI, I had the rear holes for the USA markers filled when I had some bodywork done and they did not need to weld up the hole. The did use some sort of filler material. They did a great job, can't see a thing. So I don't have any rear markers at all. The fronts I was going to do the same as you, but IIRC the Carello lights I had were a push in type w/o mounting bolts. I have since sold those and still have the front USA markers.
     
  8. rolindsay

    rolindsay Formula 3

    Jul 14, 2006
    1,022
    Houston, TX
    Full Name:
    Rick Lindsay
    #8 rolindsay, Jul 29, 2009
    Last edited by a moderator: Sep 7, 2017
    I had the US-spec side markers removed but not the small round turn signal repeaters. The ones visible in the photo are incorrect. Superformance now stocks the correct repeaters (flatter and with a metal surround, not black plastic). I will replace these when I get back to working on this car.
    Image Unavailable, Please Login
     
  9. thecarreaper

    thecarreaper F1 World Champ
    Silver Subscribed

    Sep 30, 2003
    18,070
    Savannah
    #9 thecarreaper, Jul 30, 2009
    Last edited by a moderator: Sep 7, 2017
  10. BigTex

    BigTex Seven Time F1 World Champ
    Owner Rossa Subscribed

    Dec 6, 2002
    79,380
    Houston, Texas
    Full Name:
    Bubba
    #10 BigTex, Jul 30, 2009
    Looks good, man...nice work!
     
  11. BigTex

    BigTex Seven Time F1 World Champ
    Owner Rossa Subscribed

    Dec 6, 2002
    79,380
    Houston, Texas
    Full Name:
    Bubba
    #11 BigTex, Jul 30, 2009
    Maybe you should keep this one..:rolleyes:
     
  12. irondogmike

    irondogmike F1 Rookie

    Sep 8, 2006
    2,532
    San Diego area
    Full Name:
    Michael Tucker
    #12 irondogmike, Jul 30, 2009
    looks great
     
  13. jonesdds

    jonesdds Formula 3

    Aug 31, 2006
    2,163
    SB,CA & Park City UT
    Full Name:
    Jeff
    #13 jonesdds, Jul 30, 2009
    Very nice indeed. What about getting rid of them completely? Anyone done that? I'd be curious to see what the front side markers look like on a 328, I'll check the Blumel book as well. If it can be done to blend nicely and not be noticeable with none on the sides, why not? Going back to the US markers would be simple to do.

    Jeff
     
  14. jsa330

    jsa330 F1 World Champ
    Silver Subscribed

    Oct 31, 2003
    10,046
    75225
    Full Name:
    Scott
    #14 jsa330, Jul 30, 2009
    Looks fantastic. Side markers are fine, don't worry about them.

    I look at that kind of stuff with a changed attitude since my 330 2+2 was totaled 2+ years ago. For a street driver, I'm actually glad to have the US-spec bumpers, etc., on my 308.
     
  15. thecarreaper

    thecarreaper F1 World Champ
    Silver Subscribed

    Sep 30, 2003
    18,070
    Savannah
    #15 thecarreaper, Jul 31, 2009
    funny, last night i came in from my shop and fired up the pc to do some reading..... and i have an offer on the car from one of the ads that is still running ! i informed the potential buyer of the new valance and all the new cooling hoses i just finished.

    we will see.

    ill get a 308 gt4, and a 930 Turbo next.
     
  16. Johndahl

    Johndahl Karting

    Jan 31, 2008
    87
    Sacramento, CA
    Full Name:
    John
    #16 Johndahl, Jul 31, 2009
    Looks great! The deep spoiler really makes the difference. Like the grill too ;)

    Too bad about the side markers. Another project for another day. I kicked myself for not doing it when I had the chance.
     
  17. thecarreaper

    thecarreaper F1 World Champ
    Silver Subscribed

    Sep 30, 2003
    18,070
    Savannah
    #17 thecarreaper, Aug 1, 2009
    yep it came out well. i still have the spare euro grill you made for me, i am still using my original euro grill. its nearly impossible to tell them apart, i leave the horsie on my original just for that reason! :)
     
  18. thecarreaper

    thecarreaper F1 World Champ
    Silver Subscribed

    Sep 30, 2003
    18,070
    Savannah
    #18 thecarreaper, Aug 8, 2009
    Last edited by a moderator: Sep 7, 2017
  19. mustardfj40

    mustardfj40 Formula 3

    Jun 17, 2004
    1,142
    Northen California
    Full Name:
    Ken
    #19 mustardfj40, Aug 8, 2009
    Nice! I really like the look of the deep euro spoiler.
     
  20. prova4re

    prova4re Karting

    Nov 23, 2003
    96
    Ontario Canada
    #20 prova4re, Aug 8, 2009
    I want to see you take a pic with the fog lights on.....by your self. LOL
     
  21. thecarreaper

    thecarreaper F1 World Champ
    Silver Subscribed

    Sep 30, 2003
    18,070
    Savannah
    #21 thecarreaper, Aug 8, 2009
    i wish, (smartypants .... ) :)


    for those of who who do not get the joke, the "fog lights" are euro " flash to pass " only lights, and only work if you pull the stalk back.

    i have been looking EVERYWHERE for yellow or regular clear lenses to replace mine.

    Daniel Stern only sells the lights as assemblies, not the lenses.

    if anyone has any.... let me know!
     
  22. ncng

    ncng Rookie

    Jun 13, 2016
    16
    #22 ncng, Oct 31, 2018
    thecarreaper,

    That is beautiful job on your Euro front end and EXACTLY the look I love, with the deep dish and the "get the hell out of the way lights",
    great job! I also love the color of your car!

    Do you have updated link for the parts for the conversion?

    Again, awesome job!
    Mark
     
  23. HotShoe

    HotShoe F1 Veteran
    Silver Subscribed

    Nov 3, 2008
    8,789
    Lake Worth, FL
    Full Name:
    Anthony Lauro
    #23 HotShoe, Nov 1, 2018
    I got rid of mine also.

    You absolutely, positively have to have them welded in. You cannot use filler. Well, you can but that is a hack fix IMO.

    It is very easy to do but will require painting the quarters as you have to sand down to the metal to weld the patches in.
     
  24. Oengus

    Oengus F1 World Champ
    Rossa Subscribed Silver Subscribed

    Sep 29, 2004
    10,826
    Between timing belts/chains or West Palm Beach FL
    Full Name:
    Chas
    #24 Oengus, Nov 1, 2018
    Wow that’s super nice
     
  25. Archer911

    Archer911 Formula Junior

    Sep 26, 2016
    907
    New England
    Full Name:
    Tim
    #25 Archer911, Nov 1, 2018
    Outstanding look!
     

Share This Page