308 vs 328 rocker panels, are they the same? | FerrariChat

308 vs 328 rocker panels, are they the same?

Discussion in '308/328' started by etip, Sep 28, 2009.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. etip

    etip Formula 3

    Joined:
    Apr 4, 2004
    Messages:
    2,406
    Location:
    Washington State
    Full Name:
    Eric
    A buddy of mine needs a new driver's side rocker panel for his 328 and the dismantler offered him one off a R hand drive 308. Are these the same panels?
    I told him I'd check with the experts....
     
    etip, Sep 28, 2009
    #1
  2. BigTex

    BigTex Seven Time F1 World Champ Owner Rossa Subscribed

    Joined:
    Dec 6, 2002
    Messages:
    79,386
    Location:
    Houston, Texas
    Full Name:
    Bubba
    You mean the trim plate on the door sill, or the outer body panel of the exterior?

    The wrecking yards have books that tell them interchange info, they usually know, as they get it back if it does not work.

    Maybe others will know...
     
    BigTex, Sep 28, 2009
    #2
  3. etip

    etip Formula 3

    Joined:
    Apr 4, 2004
    Messages:
    2,406
    Location:
    Washington State
    Full Name:
    Eric
    Thanks Tex,
    I was referring to the outter body panel, not the door sill.
    My buddy forwarded the email that they sent to him and it said "no refunds" so that's why he asked me to find out for him.
     
    etip, Sep 28, 2009
    #3
  4. etip

    etip Formula 3

    Joined:
    Apr 4, 2004
    Messages:
    2,406
    Location:
    Washington State
    Full Name:
    Eric
    Bump
     
    etip, Sep 28, 2009
    #4
  5. Paul308GTSi

    Paul308GTSi Formula 3

    Joined:
    Oct 26, 2008
    Messages:
    1,003
    Location:
    Queensland Australia
    Full Name:
    Paul D
    Hey , , I'm just curious , , where is the dismantler with the RHD 308 ?? .. by this I mean which country is the dismantler in ??
     
    Paul308GTSi, Sep 29, 2009
    #5
  6. etip

    etip Formula 3

    Joined:
    Apr 4, 2004
    Messages:
    2,406
    Location:
    Washington State
    Full Name:
    Eric
    England
     
    etip, Sep 29, 2009
    #6
  7. Paul308GTSi

    Paul308GTSi Formula 3

    Joined:
    Oct 26, 2008
    Messages:
    1,003
    Location:
    Queensland Australia
    Full Name:
    Paul D
    England , of course ...........it's just that I have seen one or two rare RHD's like Jensens appear in the US and sell for next to nothing.

    It always pays to be vigilant !
     
    Paul308GTSi, Sep 29, 2009
    #7

Share This Page