Sinter Clutchdisc (Single Disc) | FerrariChat

Sinter Clutchdisc (Single Disc)

Discussion in '348/355' started by Samy, Oct 8, 2009.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. Samy

    Samy Formula Junior

    Joined:
    Dec 2, 2005
    Messages:
    603
    Hello,

    i'm looking for a clutchdisc with sintermetalic pads suitable for the single disc clutch pressure plate from the stock 348 clutch. It must be a solid disc with 4, 6 , 8 or 10 sinter pads without holes arround the center spline hub like some clutches have because that would be too weak.

    Samy
     
    Samy, Oct 8, 2009
    #1
  2. saw1998

    saw1998 F1 Veteran

    Joined:
    Jun 8, 2008
    Messages:
    8,237
    Location:
    San Antonio, Texas
    Full Name:
    Scott
    I'd contact Center Force Clutch. If they don't have it, they'll fabricate it. Tilton is also very good, although somewhat expensive.
     
    Last edited: Oct 8, 2009
    saw1998, Oct 8, 2009
    #2
  3. PAP 348

    PAP 348 Ten Time F1 World Champ Lifetime Rossa Owner

    Joined:
    Dec 10, 2005
    Messages:
    100,220
    Location:
    Mount Isa, Australia
    Full Name:
    Pap
    Something like mine Samy? :):)

    Ex-Fchatter Ferrarifixer made this one for me. :D:D

    He can also make single ones. If you're keen, let me know and I will pass on his contact details. :):)
    Image Unavailable, Please Login
     
    Last edited by a moderator: Sep 7, 2017
    PAP 348, Oct 8, 2009
    #3

Share This Page