308GTB roll cage/deep front spoiler | FerrariChat
Buy

308GTB roll cage/deep front spoiler

Discussion in '308/328' started by 355michael, Oct 17, 2009.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. 355michael

    355michael Karting
    Silver Subscribed

    Sep 1, 2006
    80
    Phila Area
    #1 355michael, Oct 17, 2009
    I recently purchased a 77 308GTB-so recent I dont have it yet-This is my forth 308 and it will be primarily used for track events. Its a US spec car that has had a ton of mods added: P6 cams,355 front brakes,coilover shocks,sway bars,bushings,drysump oiling system-the list goes on. I want to add a half cage that would include the main loop,main loop X brace and the tubes that brace the main loop into the engine bay. I have seen several posts about 308 rally builds and are looking for those set of tubes. I am sure I could have them fabricated locally but if there available "off the rack" I would like to purchase. I also want to add a deep euro front spoiler. I have seen a few aftermarket pieces available on ebay but are looking for some advice from forum users. The car needs a major but seems decent other than that. We will be working on it over the winter in prep for spring.
    Thanks
     
  2. NitroHonda

    NitroHonda Rookie

    Sep 23, 2009
    49
    Pflugerville, TX
    Full Name:
    Mike Keathley
    #2 NitroHonda, Oct 17, 2009
  3. ddiesen

    ddiesen Karting

    Apr 6, 2006
    159
    Mesa Arizona
    Full Name:
    David Diesen
    #3 ddiesen, Oct 17, 2009
    As far as a cage I think you'll be looking for your local fabricator. Safety Devices used to make a cage for this car but its no longer available that I've seen. There are a number of places to get a euro spoiler (I've had a few) but finally got the one from Berlinetta with the incorporated brake ducts and was very happy with the fit and quality.
     
  4. Brian Harper

    Brian Harper F1 Rookie
    Owner Silver Subscribed

    Feb 17, 2006
    4,078
    San Jose area
    Full Name:
    Brian Harper
    #4 Brian Harper, Oct 17, 2009
    I would be VERY surprised if any GT4 body parts/body kits fit a GTB/s.
     
  5. NitroHonda

    NitroHonda Rookie

    Sep 23, 2009
    49
    Pflugerville, TX
    Full Name:
    Mike Keathley
    #5 NitroHonda, Oct 20, 2009
    Well there you go! Nix that idea!
     
  6. pad

    pad Formula 3

    Sep 30, 2004
    1,426
    Tequesta, FL
    Full Name:
    Paul Delatush
    #6 pad, Oct 20, 2009
    Classic Coach can build you a proper cage. They are in Elizabeth, NJ. If you are going to seriously track the car, this is not an item to skimp on.
     

Share This Page