Thanks, I looked up SEA awhile back and they're long since defunct...I wonder if Scottu Antonio is the namesake of company? There's an interesting span of time between the two cars - a learning curve perhaps?!
Lot of holes eliminated on that car. Now here is a case of "how far do you go?" This a respray. Then there is the removal of everything, doors, flares, lights. Probably a vast difference on the wallet.
Apparently so. The work is being carried out to a high standard by Bobileff Motorcar Co. Image Unavailable, Please Login Image Unavailable, Please Login Image Unavailable, Please Login
Would'nt the car get painted without the flairs then put them on after painting and chaulk all the way around. Would seem doing it the way shown the paint would build up between the body and flair etc Just my 2 cents.
I suspect that the flares were left on to to better match the paint as a metallic blue like that can be next to impossible to get right on panels that are right next to each other like the flares. If you look closely when the base was applied the headlights, doors, and rear inlet scoops were installed and then removed for the clear coat as they would have been cleared seperately to get better coverage. Given the level of disassebly shown in the photos and the quality of work that comes out of Gary's shop. I am certain that not removing the flares was entirely by design. Man that is an awesome colour. That is the great thing about the Countach, red is one of the last colours I would want it in
I know that Bobilief does great work. Just thinking out load. If paint matching during base coat was the concern then where is the front bumper? I don't think matching the flares would be a problem as long as they get painted the same time by the same guy and same paint mix. I would worry about paint that is built up between the flare and body cracking over time due to flex and so forth.
I did a little checking and it appears your theory has good basis. In fact, pantograph wipers have a marine application with boats etc, and are used widely in commercial application with buses, trucks etc, even on trains. In fact anything with a wide, flat windscreen will benefit from the wider cleaning action of the pantograph unit as shown below, especially too, if the windscreen is severely raked and use of just one wiper will aid visibility from within the car. It stands to good reason that the engineers chose this kind of application. Image Unavailable, Please Login Image Unavailable, Please Login Image Unavailable, Please Login
Mike: Im sure they have got it under control. If you are asking where the front bumper is, you might as well ask, where have the doors gone? Or the headlamp buckets? Without speaking to the painter, and without knowing the paint-booth setup, and whether the smaller components are painted in an adjacent booth alongside etc, your questions make it seem as if they are amateurs at this. As far as paint building up between flare & body is concerned, that should be absolutely no issue for a painter experienced with painting a Countach. You will note that once-upon-a-time, a small outfit named Automobili Lamborghini SpA in a little town called Sant Agata did it this way. Furthermore, if you've lived with Countachs (and I assume you have) you'll recall that it is true that flex can be an issue with a Countach's body. But the joint between the flares and the body is not the issue area - the area around the radiator air-boxes is. So flex is a non-issue with this method of painting. The pics were posted with permission from Bobileff for all to share, & to enjoy a good car coming back to life. Since you have already stated that you know that Bobilef does good work, then enjoy the pics and rest assured that all is in hand.
I saw pictures, it may have been Raymond, of someone who before having their Countach repainted welded little L shaped thick pieces of aluminum around each corner of the body against the radiator boxes to reinforce those areas that usually show stress (which I think most of is caused by leaning over and putting undue weight on the radiator scoops). This is something I would do as long as everything else is being done. Of course they go Under the panel so as not to be seen. Is this the ex-Turkey car? Great color.
I once owned a Countach where the reinforcement was done around the 'boxes on the underside, but the cracks came back. Funny thing about those cracks is they get to about one inch, and they stop. All the cars In have seen exhibited similar symptoms. This is indeed the ex-Saudi Royal family car, and yes, I agree it is an awesome color.
honestly i am NOT a fan of red lambos ... but red looks pretty good on a series uno model ... like this car this said, i agree there are some rare colors that look MUCH better than red pn any countach
The paint looks great. As we are know Bobileff has graduated from the amatuer league As far as the flares, god bless them for not taking them off, the rears are a pain in the ass to put back on. If I don't have to take mine off, I'm happy. On another note about painting, as someone else said, hanging the other parts next to or in the next booth is perfectly fine.....just don't paint the next day with a different batch.
It's awful, they had to replace the left one on my car, nothing fits, it's pure manual ability how good the result will be, since then I have high respect for the bodyworkers.
aww come on! My preference is a white one, then a silver one. The rest of the colors are the same with yellow being last for me. I have yet to get tired of looking at a red one in my garage though.