NRG quick release | FerrariChat
Buy

NRG quick release

Discussion in '308/328' started by Tokyo Drftr, Nov 5, 2009.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. Tokyo Drftr

    Tokyo Drftr Formula 3

    Jan 18, 2009
    2,461
    UA-USA-JP
    Full Name:
    Ро&#1081
    #1 Tokyo Drftr, Nov 5, 2009
    Can anyone confirm the NRG thin quick release will work on the factory Nardi wheel? I want it more for a theft det.
     
  2. hypertek

    hypertek Rookie

    Nov 3, 2009
    5
    #2 hypertek, Nov 5, 2009
    I got one on my rx7 and it bolts to the momo steering wheel and hub. They all pretty much use the same bolt pattern so it will work.
     
  3. Tokyo Drftr

    Tokyo Drftr Formula 3

    Jan 18, 2009
    2,461
    UA-USA-JP
    Full Name:
    Ро&#1081
    #3 Tokyo Drftr, Nov 5, 2009
    Thanks
     
  4. Tokyo Drftr

    Tokyo Drftr Formula 3

    Jan 18, 2009
    2,461
    UA-USA-JP
    Full Name:
    Ро&#1081
    #4 Tokyo Drftr, Nov 5, 2009
    Oh......and welcome to the chat, by the way.
     
  5. Steve Magnusson

    Steve Magnusson Two Time F1 World Champ
    Lifetime Rossa

    Jan 11, 2001
    26,842
    30°30'40" N 97°35'41" W (Texas)
    Full Name:
    Steve Magnusson
    #5 Steve Magnusson, Nov 5, 2009
    Last edited by a moderator: Sep 7, 2017
    Unfortunately, if it fits the MOMO, it won't fit the Nardi. Even though both use 6 equally-spaced holes, the Nardi hole pattern is phased differently, and the holes are on a different diameter base circle. Here's a description of both so you can see the differences and judge if the part you are considering will work or not (perhaps the manufacturer might make both):
    Image Unavailable, Please Login
     
  6. Tokyo Drftr

    Tokyo Drftr Formula 3

    Jan 18, 2009
    2,461
    UA-USA-JP
    Full Name:
    Ро&#1081
    #6 Tokyo Drftr, Nov 5, 2009
    that was my next question.
     

Share This Page