front bumper spoiler | FerrariChat

front bumper spoiler

Discussion in '360/430' started by Sidler360Spider, Jan 20, 2010.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. Sidler360Spider

    Sidler360Spider Rookie

    Joined:
    May 30, 2009
    Messages:
    31
    Location:
    North Jersey
    does anyone know how to take off the front bumper spoiler, I want to replace it to the carbon fiber one, and it seems that when i took screws out off the bottom, I cant get them screwed back in. Any help would be great. Do i go through the trunk to get them bolted back on.
     
    Sidler360Spider, Jan 20, 2010
    #1
  2. ZIP22

    ZIP22 Karting

    Joined:
    Jun 7, 2009
    Messages:
    157
    ZIP22, Jan 20, 2010
    #2
  3. Sidler360Spider

    Sidler360Spider Rookie

    Joined:
    May 30, 2009
    Messages:
    31
    Location:
    North Jersey
    its not working :) the link is dead
     
    Sidler360Spider, Jan 20, 2010
    #3
  4. Frenzo

    Frenzo Formula Junior Silver Subscribed

    Joined:
    Aug 7, 2006
    Messages:
    478
    Location:
    Brisbane Australia
    Full Name:
    Brenden Bonning
    Obviously not one of ours, you wouldn't be having that problem.:D
    You will probably find that it was secured with nuts through the bumper. You will need to remove the pan underneath, which will give you access to the inside of the bumper bar.:)
    Ours are secured with threaded nutserts, which is the same system we use for our skid plates, you can see the fixing method on the instruction sheet on the website.:)
    Ciao
    Brenden
     
    Frenzo, Jan 23, 2010
    #4

Share This Page