348 Body images required | FerrariChat

348 Body images required

Discussion in '348/355' started by crazybob, Mar 9, 2010.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. crazybob

    crazybob Rookie

    Sep 22, 2009
    8
    Lincoln, England
    Can anyone assist ?. I have purchased a 348 with accident damage on the front, the car is rebuilt but I dont like the look of the panel in front of the headlamp pods, I can see my upper crossmember when looking from the back of the bonnet (hood)towards the front of the headlamp pod, is this correct ???. could anyone post or send a image ??
    [email protected]
     
  2. PAP 348

    PAP 348 Ten Time F1 World Champ
    Lifetime Rossa Owner

    Dec 10, 2005
    100,220
    Mount Isa, Australia
    Full Name:
    Pap
    Can you post a pic of your car Bob to show us what you are talking about? :):)

    I dont understand what you're on about. :D:D
     
  3. chas-3

    chas-3 Formula 3
    Silver Subscribed

    Jan 28, 2009
    1,281
    Colorado
    Full Name:
    Chuck
    #3 chas-3, Mar 9, 2010
    Last edited by a moderator: Sep 7, 2017
    Sounds like maybe the front end portion of the frame may have been pushed upward when damaged. Thus why you can see the cross member. Looking down the slope of the 348 hood everything should be smooth and tight. just a guess though
    Image Unavailable, Please Login
     
  4. crazybob

    crazybob Rookie

    Sep 22, 2009
    8
    Lincoln, England
    #4 crazybob, Mar 9, 2010
    Last edited by a moderator: Sep 7, 2017
  5. chas-3

    chas-3 Formula 3
    Silver Subscribed

    Jan 28, 2009
    1,281
    Colorado
    Full Name:
    Chuck
    Well that doesn't look anywhere near as bad as I expected. I wouldn't suspect frame damage there. Can't take any photos of mine right now because it is being worked on. Maybe just misaligned light pods. I'm sure some of the others will be able to help you out on this one.
     
  6. sambomydog

    sambomydog Guest

    May 23, 2009
    1,380
    I cant tell from the pictures if the head lamp pods sit bellow the line of the front fenders/wings. If they do then the pods just need adjusting and raised up a little. This is easy to do.
     
  7. crazybob

    crazybob Rookie

    Sep 22, 2009
    8
    Lincoln, England
    headlight pods are level with wings (fenders) and bonnet (hood)
     
  8. sambomydog

    sambomydog Guest

    May 23, 2009
    1,380
    #8 sambomydog, Mar 9, 2010
    Last edited: Mar 9, 2010
    And by the looks of it the front panel is also level with the bonnet? If this is the case there is very little one can do about this being it has had a bump.
    I reckon its either that or Ferraris notorious crap build quality.
     
  9. TheOnlyest

    TheOnlyest Formula 3

    Sep 25, 2007
    1,686
    Las Vegas Nevada, US
    Full Name:
    Steve
    #9 TheOnlyest, Mar 10, 2010
    Last edited: Mar 10, 2010
    Well, the pics are dark and fuzzy, but they look right to me! the front edge of bucket covers slope down at the very front and do sit below the nose piece. The key is to see if the left and right edges are even and consistent with the bonnet and wings.

    It does look like the nose panel is out of adjustment where it meets the wings, but the position of the bucket covers looks right!
     
  10. crazybob

    crazybob Rookie

    Sep 22, 2009
    8
    Lincoln, England
    Its the bit in between the nose panel and the headlamp pod that doesnt look right to me, you can only see it when you look down over the light. can someone post a picture of there pod/nose panel ?
     
  11. AceMaster

    AceMaster Three Time F1 World Champ

    Feb 6, 2009
    34,777
    Ontario, Canada
    Full Name:
    Mike
    Does not look that bad...I will have a look at mine when I get home and let you know what I find.
     
  12. AceMaster

    AceMaster Three Time F1 World Champ

    Feb 6, 2009
    34,777
    Ontario, Canada
    Full Name:
    Mike
    I had a look at mine and it looks very similar to yours, so nothing to worry about. The top of the headlight (when closed) is not flush with the front end, it sits about half inch lower. That is the only part that is not flush.

    I will take a few pics and post them here tomorrow.
     
  13. crazybob

    crazybob Rookie

    Sep 22, 2009
    8
    Lincoln, England
    Okat thanks I look forward to see what yours looks like.

    Regards
    Bob
     
  14. AceMaster

    AceMaster Three Time F1 World Champ

    Feb 6, 2009
    34,777
    Ontario, Canada
    Full Name:
    Mike
    #14 AceMaster, Mar 17, 2010
    Last edited by a moderator: Sep 7, 2017
  15. crazybob

    crazybob Rookie

    Sep 22, 2009
    8
    Lincoln, England
    Thanks for the pictures, makes me happier to see mine looks very similar to yours.
     
  16. AceMaster

    AceMaster Three Time F1 World Champ

    Feb 6, 2009
    34,777
    Ontario, Canada
    Full Name:
    Mike
    #16 AceMaster, Mar 18, 2010
    Last edited: Mar 18, 2010
    My pleasure, and I am happy that your mind is now at ease :)
     
  17. lyrm

    lyrm Karting

    Sep 9, 2008
    176
    spain
    hi, here you have pic of the mine too :D

    I don´t understand english very weel but if you need more, let me know for private message ;)

    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
     
  18. crazybob

    crazybob Rookie

    Sep 22, 2009
    8
    Lincoln, England
    Thanks for the great pictures, I can see i need to adjust mine slightly.
    Many thanks again.

    regards
    Bob
     
  19. AceMaster

    AceMaster Three Time F1 World Champ

    Feb 6, 2009
    34,777
    Ontario, Canada
    Full Name:
    Mike
    Our pleasure Bob, that is what the Brotherhood is all about!! :):)

    cheers
     

Share This Page