Latest pictures of MM Enzo

No worries. Your BIL's hearttransplant is much more important than Losee's Enzo's "engine transplant".

Hope things went well.

 

He is doing extremely well. Thanks. Possibly going home tomorrow or in the next few days.

I may go back out next month for the Ferrari Challenge @ Miller Motorsports Park. Still won't be able to go by and see the Enzo.

 

I was at Steve Harris Imports yesterday to pick up one of my cars after a service, and I ran into Richard in the showroom. He chatted for a bit and reminisced about Challenge Rallies gone by, and then he invited me down into the service bay with him for a closer look at the rebuild of his Enzo. The roll cage is really neat (he said "I don't want to count on getting lucky again"), and those turbos look MEAN. I speculated that he'd be flirting with the 1,000+ HP mark, depending on how much boost he decides to run, but his only reply was "We'll see."

We picked through the "mound" of salvaged parts that sits on the floor for a bit, and then looked through some of the way broken pieces that won't be re-used. The old transmission casing is toast. Some serious physics were at play to tear it up like that!

It still looks like there's a good amount of time left on this project, but I'm sure the final product will be mind numbing.

I also got to check out the "Fantastic Four" that are on display in the showroom, then drive back to Provo with the sun shining, top removed, and my 12-year old daughter in my passenger seat... urging me to "drive faster, Daddy!"

A good day!

 

Did you happen to see how big they were? Any ecu details?

 

Been three months, no new updates from anyone?

 

Any updates?

 

Did he decide to use the enzo tranny or did he upgrade to the FXX one? Sounds like the FXX version saves 40% which should be around 20ms per shift.

 

Saw it last week.. Can't speak for sure on which trans, but I believe it is basically a stock trans with a super tall final drive. Turbo plumbing looks to be all done. Electronics and wiring is going in. Wheels for the Salt Flats have been made and rumor is that there is a push to have her running at the Bonnevile Speed Week...

 

just out of curiosity, what were the other four Super Ferraris?

 

I'm assuming the car is still at Steve Harris, in which case the line up is a 288GTO, F40, F50, and then an Enzo.


Was Richard at ALMS? I saw a guy that I swear was him measuring (!) that amazing transporter that Risi brought (the one marked Boardwalk Ferrari). If that was him I'm interested in what he was doing and what he has up his sleeve!

 

then you mean "THE" four super Ferraris. That sounds like a Kodak moment. Lets see some pictures even if the MM is under a cover.

 

Unfortunately, the only way you can purchase FXX parts, is to provide the serial number of the FXX for verification. If you don't own one, you don't get parts....

 

well that rules that out. That's an interesting fact though...

 

I heard it is being cast in new Transformers 3 movie!

 

engine fire up....

http://www.youtube.com/watch?v=dqsDweYhK5o&feature=player_embedded

longer clip

http://www.youtube.com/watch?v=qfcmh7XMrcI&feature=player_embedded

 

Thank you for posting! That is going to be a machine to contend with!

Steve

 

In the first short clip, we were actually just trying to spin up the motor and check oil pressure before the initial attempt to start. It spun about three times and fired! That is why the mad scramble to shut it down. Five days short of the four year anniversary of the accident, the Enzo really wanted to run!!

The second clip was 24 hours later after considerable tuning and mechanical adjustments, with the intercoolers and charge tubes installed and running through the turbos.

Unfortunatly, I cannot go into specific details of the build up at this time, that day is coming soon, but wanted to comment on the YouTube links, and look forward to sharing more details in the near future.

 

Long may she run!

 

Looking good. Thanks for sharing, Jas.

 

Whoever hosted the clips on YouTube offered some details:

Great to see this car resurrected and I wish the owner all the best as he tests her limits again.

>8^)
ER

 

Here's a four minute video that was uploaded earlier today.

 

Sweet. Been waiting for some real visuals of the car for months now...video w/sound is even better. Thanks to all who posted.

Am wondering if he will be running some type of roof scoop, what with the air intakes being on top of the engine, at the back/top of the engine bay...

 

NO! you got it all wrong...

its the P4/5

heard it from a reliable source...

The new movie is going to introduce the new Decepticon named "Glickencon" allegedly he wins over the character played by Megan Fox in the first 5 minutes of the movie never to be seen again

 

Thanks for the videos!