http://www.ms-motor-service.com/ximages/PDF_Kataloge/pg_zz01_refoeksnr_web.pdf
Replacement oil cooler fan switch. Intermotor p/n 50172 Lucas SNB 793 Volvo 3286641-0 Volvo 340/ 1.4 1.6 1.7 8 pounds on ebay.
Early model 348's running the AC Delco alternators now have an inexpensive replacement. Brotherhood member 3forty8 found a replacement made by a company name World Powers Systems for $80. The model number is 20-182-11-1.
'just finished installing 2 of the walker o2 sensors ($60) and two Hundai/Kia crank sensors ($20 each). Thanks guys for figuring this stuff out. The car has never run better! Dave
One thing I have learned the hard way is that the electrical connection at the crank sensor connector is CRITICAL. That is why the gentleman in Boulder sells all he can make of his gold lugs connector retrofit kit. I personally think that the gold connectors, while far better than the stock connectors, are not ideal, and that a better answer is a fully weatherproof connector housing, surrounding standard terminal lugs, and containing a generous amount of Stabililant or Deoxit Shield. The best answer would be to revise the wiring to move the connector off the "ground". I haven't yet traced the harnesses' routes, as they leave the area of the crank wheel and proceed towards the efi computers, to identify a likely spot to relocate the connectors, but I will! The stock location is not just vulnerable to contamination of the electrical connectors from water, dirt, and oil, but is also vulnerable to physical damage. Ask me how I know...
Hello. Coil for 348. ______________________________________________________________________ Replacment numbers 0 221 503 407 Bosch 048 905 105 1 VAG 0K0-11-18-100 Kia 134386 Ferrari 60558152 Alfa Romeo 60558152 Fiat 60809606 Fiat 7648797 Fiat 76487970 Fiat DMB300 Lucas ERR6045 Land Rover ERR6566 Land Rover PW811201 DMB300 Proton DMB300 LUCAS ____________________________________________________________________________ APPLICATION LIST ALFA ROMEO 155 1.7 1993 - 1996 ALFA ROMEO 155 1.8 1992 - 1993 ALFA ROMEO 155 2.0 1992 - 1995 ALFA ROMEO 164 2.0 1987 - 1998 ALFA ROMEO 164 Super 2.0 1987 - 1998 AUTOBIANCHI Y10 1.1 1990 - DACIA Nova 1.6 FERRARI 348 3.4 1990 - 1995 FERRARI F355 3.4 1994 - 1999 FERRARI Mondial 3.4 1989 - 1993 FIAT Brava 1.2 1998 - 2001 FIAT Brava 1.4 1995 - 2001 FIAT Bravo 1.2 1998 - 2001 FIAT Bravo 1.4 1995 - 2001 FIAT Croma 2.0 1992 - 1996 FIAT Fiorino 1.4 1993 - 2001 FIAT Fiorino 1.6 1993 - 2001 FIAT Marea 1.2 1998 - FIAT Marea 1.4 1996 - FIAT Marea S.W./Weekend 1.2 1998 - FIAT Marea S.W./Weekend 1.4 1996 - FIAT Palio Weekend 1.2 2001 - FIAT Punto 1.2 16V 1999 - FIAT Punto 1.4 GT TURBO 1994 - 1999 FIAT Scudo 1.6 1996 - FIAT Tempra 1.4 1992 - 1994 FIAT Tempra 1.6 1990 - 1996 FIAT Tempra S.W./Weekend 1.4 1992 - 1996 FIAT Tempra S.W./Weekend 1.6 1990 - 1996 FIAT Tipo 1.4 1989 - 1995 FIAT Tipo 1.6 1992 - 1995 FSO (Daewoo) Caro (Polonez) 1.4 1992 - KIA Sportage 2.0 LANCIA Dedra 1.6 1989 - 1999 LANCIA Delta 1.4 LANCIA Delta 1.6 LANCIA Kappa 2.0 1995 - 2001 LANCIA Kappa Coupe 2.0 1995 - 2001 LANCIA Kappa S.W. 2.0 1995 - 2001 LANCIA Thema 2.0 1988 - 1994 LANCIA Y (Ypsilon) 1.2 2000 - LANCIA Y (Ypsilon) 1.4 1996 - LANCIA Y10 (Ypsilon) 1.1 1989 - 1995 LANDROVER Discovery 4.0 1998 - LANDROVER Range Rover 3.9 1994 - 2002 LANDROVER Range Rover 4.0 1998 - 2002 LANDROVER Range Rover 4.6 1994 - 2002 PROTON Gen 2 1.6 PROTON Wira 1.3 PROTON Wira 1.5 PROTON Gen 2 1.3 FIAT Fiorino Pick Up 1.4 FIAT Fiorino Pick Up 1.6 ___________________________________________________________________________ You can buy in Europe for 30$ Cheers P.S. Peugeot 306 is different (connector has 4 pins while ferrari runs 3 pin connectors)
I took all of it a part and found that it was a spring in the switch which was broken. I replaced it and off we went! Take a close look before you replace. Take everything apart and look around. OK, if it all melted maybe not but try.
I have since learned that the connectors that Dave sells have a lot more engineering in them than I realized when I wrote this. He has data that shows that his specially engineered gold contacts are better than standard contacts even with a high tech contact enhancer. Also he has tested the weather proof housings and has found that the individual wire seals are too soft, and that is why he uses the rubber boot housing.
There are separate part numbers for the rear brake rotors. Are they the same? Are their other sources of brake rotors that are not $700 each!?
Shemp, I think your rotor links on my348 are dead. Porphy, Try here; rears are $270/each: http://www.tirerack.com/brakes/brakes.jsp?make=Brembo&model=Replacement+Rotor&group=Replacement+Rotor&autoMake=Ferrari&autoModel=348&autoYear=1992&autoModClar=
I am searching for a short block from a '97/98/99 - 355 (6 speed) - had connecting rod bolt shear off and the engine suffered damage. It seems that there are not many engines available?
I recently bought one from somewhere for like $50 and counted myself very lucky. Where the heck is the napa reference???
