FChat Completed Models and WIP Thread | Page 19 | FerrariChat
Buy

FChat Completed Models and WIP Thread

Discussion in 'Collectables, Literature, & Models' started by zoRob, May 22, 2009.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

Page 19 of 37
  1. Latsyrc

    Latsyrc F1 Rookie

    Jun 23, 2008
    2,798
    Utah, USA
    Full Name:
    Travis
    #451 Latsyrc, Aug 25, 2010
    Last edited by a moderator: Sep 7, 2017
    gsworld2014 likes this.
  2. Ferrari TR

    Ferrari TR Rookie

    Dec 15, 2005
    21
    Aurora, Colorado
    Full Name:
    Bill D
    #452 Ferrari TR, Sep 2, 2010
    Last edited by a moderator: Sep 7, 2017
    Something silly. A Bandai racer vintage 1988, about 1/20th scale, wearing a coat of custom orange enamel, a scratch built wing with all lenses painted on.
    Image Unavailable, Please Login
     
  3. F1tommy

    F1tommy F1 World Champ
    Silver Subscribed

    Dec 15, 2007
    11,481
    Sugar Grove USA
    Full Name:
    Tom Tanner
    #453 F1tommy, Oct 23, 2010
    All finished models and wips should be put in this thread.

    Tom Tanner/Scale Designs/Ferrari Expo 2011-Chicago April 2011
     
  4. Bounce

    Bounce Formula 3

    Nov 30, 2009
    1,024
    Perth, Australia
    Full Name:
    Patrick
    #454 Bounce, Oct 24, 2010
    Last edited by a moderator: Sep 7, 2017
  5. lucky_13_2002

    lucky_13_2002 F1 Rookie

    Nov 26, 2006
    3,026
    Colorado
    Full Name:
    Michael
    #455 lucky_13_2002, Oct 25, 2010
    Last edited by a moderator: Sep 7, 2017
    OK then here are some atuff I've been working on for some time. I'll ask you to excuse me in advance for my disorganization, but I can never work on just one project at a time, so I'll be posting a mixture of finished models and the progress to others

    Here is what Hamann calls Black Miracle. Model is based on Mattel. Wheels, brakes, ground effects and interior are all made by me. All the photoetch is Tremonia
    Image Unavailable, Please Login
    Image Unavailable, Please Login
    Image Unavailable, Please Login
    Image Unavailable, Please Login
    Image Unavailable, Please Login
    Image Unavailable, Please Login
    Image Unavailable, Please Login
    Image Unavailable, Please Login
     
  6. lucky_13_2002

    lucky_13_2002 F1 Rookie

    Nov 26, 2006
    3,026
    Colorado
    Full Name:
    Michael
    #456 lucky_13_2002, Oct 25, 2010
    Last edited by a moderator: Sep 7, 2017
    After I posted the pictures I see how terrible they are. The orange is actually lighter and more pale somewhat, but I am not into photography and don't know how to make it appear better on my pictures. Also I see alot of orange dots all over which is like dust particles left from the unmasking after the paint job. To the naked eye, they are not there, but the camera is picking them up.

    Here are a couple more shots
    Image Unavailable, Please Login
    Image Unavailable, Please Login
    Image Unavailable, Please Login
     
  7. johneli1

    johneli1 Formula Junior

    Feb 10, 2006
    714
    Hampshire, England
    Full Name:
    John
    #457 johneli1, Oct 26, 2010
    I'd love one of these!
     
  8. lucky_13_2002

    lucky_13_2002 F1 Rookie

    Nov 26, 2006
    3,026
    Colorado
    Full Name:
    Michael
    #458 lucky_13_2002, Oct 26, 2010
    Last edited by a moderator: Sep 7, 2017
    gsworld2014 likes this.
  9. lucky_13_2002

    lucky_13_2002 F1 Rookie

    Nov 26, 2006
    3,026
    Colorado
    Full Name:
    Michael
    #459 lucky_13_2002, Oct 26, 2010
    Last edited by a moderator: Sep 7, 2017
    After I cut the roof, I noticed that the engine hood has louvers all over, unlike the coupe that had them only on half the hood. Making a proper part really tested my patience.
    Image Unavailable, Please Login
    Image Unavailable, Please Login
    Image Unavailable, Please Login
    Image Unavailable, Please Login
    Image Unavailable, Please Login
    Image Unavailable, Please Login
    Image Unavailable, Please Login
    Image Unavailable, Please Login
    Image Unavailable, Please Login
    Image Unavailable, Please Login
     
  10. lucky_13_2002

    lucky_13_2002 F1 Rookie

    Nov 26, 2006
    3,026
    Colorado
    Full Name:
    Michael
    #460 lucky_13_2002, Oct 28, 2010
    Last edited by a moderator: Sep 7, 2017
  11. lucky_13_2002

    lucky_13_2002 F1 Rookie

    Nov 26, 2006
    3,026
    Colorado
    Full Name:
    Michael
    #461 lucky_13_2002, Oct 28, 2010
    Last edited by a moderator: Sep 7, 2017
  12. lucky_13_2002

    lucky_13_2002 F1 Rookie

    Nov 26, 2006
    3,026
    Colorado
    Full Name:
    Michael
    #462 lucky_13_2002, Oct 28, 2010
    Last edited by a moderator: Sep 7, 2017
  13. lucky_13_2002

    lucky_13_2002 F1 Rookie

    Nov 26, 2006
    3,026
    Colorado
    Full Name:
    Michael
    #463 lucky_13_2002, Oct 28, 2010
    Last edited by a moderator: Sep 7, 2017
  14. lucky_13_2002

    lucky_13_2002 F1 Rookie

    Nov 26, 2006
    3,026
    Colorado
    Full Name:
    Michael
    #464 lucky_13_2002, Oct 28, 2010
    Last edited by a moderator: Sep 7, 2017
  15. lucky_13_2002

    lucky_13_2002 F1 Rookie

    Nov 26, 2006
    3,026
    Colorado
    Full Name:
    Michael
    #465 lucky_13_2002, Oct 28, 2010
    Last edited by a moderator: Sep 7, 2017
    One day I wondered around a Walmart (yes you read right :D) and at the craft's isle I found a packet of vinil patches, used to repair umbrellas, back packs etc. The packet included four rectangular pieces in four colors. Best part......self adhesive and super thin.
    So I bought it (under $2) and desided I'll use it for the boot as the vinil had super fine texture.
    So first some templates were made and then cut from the black piece of vinil. Then a wire frame was made to create an edge under the vinil and everything was put in place over the "folded roof" the painted heads from pinheads were used to duplicate the buttons and to hold the edges like on the real thing.
    Image Unavailable, Please Login
    Image Unavailable, Please Login
    Image Unavailable, Please Login
    Image Unavailable, Please Login
    Image Unavailable, Please Login
    Image Unavailable, Please Login
    Image Unavailable, Please Login
    Image Unavailable, Please Login
    Image Unavailable, Please Login
     
  16. lucky_13_2002

    lucky_13_2002 F1 Rookie

    Nov 26, 2006
    3,026
    Colorado
    Full Name:
    Michael
    #466 lucky_13_2002, Oct 28, 2010
    Last edited by a moderator: Sep 7, 2017
    The engine that came in the model consisted of two pieces molded in black. So quite a bit of masking, painting and dry-brushing went on. also a lot of holes had to be drilled (each pin on the second picture indicates a hole)
    I wanted a used-well-taken-care-of-engine-bay-effect, so I scuffed the red here and there and used some braided line for some hoses.
    The difference between what I started with and what I had in the end was unbelievable
    Image Unavailable, Please Login
    Image Unavailable, Please Login
    Image Unavailable, Please Login
    Image Unavailable, Please Login
    Image Unavailable, Please Login
     
  17. Latsyrc

    Latsyrc F1 Rookie

    Jun 23, 2008
    2,798
    Utah, USA
    Full Name:
    Travis
    #467 Latsyrc, Oct 28, 2010
    Very cool custom work!
     
  18. lucky_13_2002

    lucky_13_2002 F1 Rookie

    Nov 26, 2006
    3,026
    Colorado
    Full Name:
    Michael
    #468 lucky_13_2002, Oct 28, 2010
    Last edited by a moderator: Sep 7, 2017
    The front seats needed backs and the bottom of the dash was shaved and filled and everything in the interior was painted and then all the extra details were made. After market cd player with GNR's Use your ilusion cd poking out, custom embroidered carpets, switches, seat belts etc......
    Image Unavailable, Please Login
    Image Unavailable, Please Login
    Image Unavailable, Please Login
    Image Unavailable, Please Login
    Image Unavailable, Please Login
    Image Unavailable, Please Login
    Image Unavailable, Please Login
    Image Unavailable, Please Login
    Image Unavailable, Please Login
    Image Unavailable, Please Login
    Image Unavailable, Please Login
    Image Unavailable, Please Login
     
  19. lucky_13_2002

    lucky_13_2002 F1 Rookie

    Nov 26, 2006
    3,026
    Colorado
    Full Name:
    Michael
    #469 lucky_13_2002, Oct 28, 2010
    Last edited by a moderator: Sep 7, 2017
  20. lucky_13_2002

    lucky_13_2002 F1 Rookie

    Nov 26, 2006
    3,026
    Colorado
    Full Name:
    Michael
    #470 lucky_13_2002, Oct 28, 2010
    Last edited by a moderator: Sep 7, 2017
    So here it is:
    Ferrari Mondial 8 Cabriolet, LE number 1 of 1 by MRM :D

    I hope you like it guys ;)
    Image Unavailable, Please Login
    Image Unavailable, Please Login
    Image Unavailable, Please Login
    Image Unavailable, Please Login
    Image Unavailable, Please Login
    Image Unavailable, Please Login
    Image Unavailable, Please Login
    Image Unavailable, Please Login
    Image Unavailable, Please Login
    Image Unavailable, Please Login
    Image Unavailable, Please Login
    Image Unavailable, Please Login
    Image Unavailable, Please Login
    Image Unavailable, Please Login
    Image Unavailable, Please Login
    Image Unavailable, Please Login
     
  21. Latsyrc

    Latsyrc F1 Rookie

    Jun 23, 2008
    2,798
    Utah, USA
    Full Name:
    Travis
    #471 Latsyrc, Oct 28, 2010
    Incredible work! I still need a lot of practice on flocking. It always comes out pretty thin. Any tips?
     
  22. F1tommy

    F1tommy F1 World Champ
    Silver Subscribed

    Dec 15, 2007
    11,481
    Sugar Grove USA
    Full Name:
    Tom Tanner
    #472 F1tommy, Oct 28, 2010
    Good looking model. Looks like alot of work.

    Tom Tanner/Scale Designs/Ferrari Expo 2011-Chicago April 2011
     
  23. spirot

    spirot F1 World Champ

    Dec 12, 2005
    15,112
    Atlanta
    Full Name:
    Tom Spiro
    #473 spirot, Oct 29, 2010
    Last edited by a moderator: Sep 7, 2017
    Here is my latest mock up... still have a lot of work to do, but I just wanted to get an idea of the finished look....Ferrari 312 early design F-1 car. Surtees winner at Spa... numbers are not correct yet.
    Image Unavailable, Please Login
     
  24. lucky_13_2002

    lucky_13_2002 F1 Rookie

    Nov 26, 2006
    3,026
    Colorado
    Full Name:
    Michael
    #474 lucky_13_2002, Oct 29, 2010
    Thabks for the comments guys. I am currently working on another monster project. Pagany Zonda C12. It is a lot worse model from Motor Max for a base, compared to the HotWheels Mondial, but they are the only ones who make it. also I am deep into two Novitec Rosso 360s. I'll post pictures tonight.
     
  25. Latsyrc

    Latsyrc F1 Rookie

    Jun 23, 2008
    2,798
    Utah, USA
    Full Name:
    Travis
    #475 Latsyrc, Nov 23, 2010
    Last edited by a moderator: Sep 7, 2017
Page 19 of 37

Share This Page