355 head tool | FerrariChat
Buy

355 head tool

Discussion in '348/355' started by yelcab, Sep 15, 2010.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. yelcab

    yelcab F1 World Champ
    Consultant

    Nov 29, 2001
    13,666
    San Carlos, CA
    Full Name:
    Mitchell Le
    #1 yelcab, Sep 15, 2010
    Last edited by a moderator: Sep 7, 2017
  2. Ricambi America

    Ricambi America F1 World Champ
    Sponsor Owner

    Dec 7, 2003
    16,471
    Winston Salem, NC
    #2 Ricambi America, Sep 15, 2010
    I have one from Hill Engineering. Call me this morning and I'll loan it to you.
     
  3. Emanuele

    Emanuele Rookie

    May 11, 2007
    40
    Bologna (Italy)
    #3 Emanuele, Sep 15, 2010
    Last edited by a moderator: Sep 7, 2017
  4. enginefxr

    enginefxr Formula 3

    Aug 20, 2007
    1,753
    S&R Exotics
    Full Name:
    Gary Sharpe
    #4 enginefxr, Sep 15, 2010
    Nice, Daniel!!! :D
     
  5. saw1998

    saw1998 F1 Veteran

    Jun 8, 2008
    8,237
    San Antonio, Texas
    Full Name:
    Scott
    #5 saw1998, Sep 15, 2010
    Daniel, you're a good man. Not too many Ferrari parts suppliers would do something like this.
     
  6. cactussed

    cactussed Formula Junior

    Mar 12, 2008
    298
    #6 cactussed, Sep 21, 2010
    Just speaking from experience.

    Be careful when doing this job. The head nuts are a right bugger to get off if you are unlucky enough to round one of them (speaking from experience).

    My advice (unsolicited I grant) is to shock them off. Put the spanner on then whack with a club hammer.

    Good luck. Getting the heads off isn't too complicated once you have the nuts off.
     

Share This Page