355 tubi sound wow!! | FerrariChat
Buy

355 tubi sound wow!!

Discussion in '348/355' started by eyboro, Oct 5, 2010.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. eyboro

    eyboro Formula Junior
    Silver Subscribed

    May 30, 2004
    989
    Chicago
    Full Name:
    Eitan
    #1 eyboro, Oct 5, 2010
    I finaly decided to install a Tubi exhaust on my 355, what a sound, my question is: the little booming I hear on, is that normal? I actualy have no problem with that sound but was just wondering.
     
  2. johng

    johng Formula 3

    Oct 23, 2004
    2,298
    northern va
    Full Name:
    john g
    #2 johng, Oct 5, 2010
    the tubi on my testarossa had a boom at around 2500-3k rpm. after about 3.5k the boom disappears. capristo L3 does the same thing on a 355.
     
  3. GerryD

    GerryD Formula 3

    May 5, 2010
    2,444
    North of TO
    Full Name:
    Guido
    #3 GerryD, Oct 5, 2010
    The boominess on the 355 is around 3600 t0 4000rpm. They dont always do it. It also depends on the surroundings. I dont mind it because it only happens for a second or so while on my way to 9000 rpm.
     
  4. FerrariDeeJay

    FerrariDeeJay Formula Junior

    Jun 2, 2009
    418
    Chino, CA
    Full Name:
    Michael
    #4 FerrariDeeJay, Oct 5, 2010
    That is normal. Take off your catalytic converters and install test pipes=pure bliss! You even get flames out of the exhaust pipes when you shift at high RPM's. :)
     
  5. eyboro

    eyboro Formula Junior
    Silver Subscribed

    May 30, 2004
    989
    Chicago
    Full Name:
    Eitan
    #5 eyboro, Oct 5, 2010
    I would but as it is I'm getting CEL for driving high flow cats with test pipes the CEL on the dashboard will burnout
     
  6. Oengus

    Oengus F1 World Champ
    Rossa Subscribed Silver Subscribed

    Sep 29, 2004
    10,861
    Between timing belts/chains or West Palm Beach FL
    Full Name:
    Chas
    #6 Oengus, Oct 5, 2010
    Just pull the bulb ;)
     
  7. GerryD

    GerryD Formula 3

    May 5, 2010
    2,444
    North of TO
    Full Name:
    Guido
    #7 GerryD, Oct 5, 2010
    Not if you have a 95 2.7
     
  8. m5guy

    m5guy Formula 3

    Aug 17, 2008
    1,627
    Ventura, CA.
    Full Name:
    Greg
    #8 m5guy, Oct 5, 2010
    Fabspeed supposedly has an O2 simulator that you plug inline with the O2 harness (I assume) that gives the ECU the dummy voltage reading that it needs to keep the CEL from lighting up. Has anyone used this?
     
  9. eulk328

    eulk328 F1 Rookie

    Feb 18, 2005
    2,800
    Full Name:
    F683
    #9 eulk328, Oct 5, 2010
    Last edited: Oct 5, 2010

    I get the boominess/resonace with the Tubi on my 355 (5.2) and the cats. are off with test pipes installed. It doesn't last for too long but it can be annoying and gives the car a "cheap" sound for that little rpm "window."
     

Share This Page