All, I need to find the correct wiper arms for my Dino *03932*. The ones I am showing is what I think I need. These are "arman&c" from John's Dino. My Dino came with a pair of "arman&c" arms but both are straight. The drivers side on John's is bent at the top(see image). I contacted Dennis McCann without luck. Maybe someone has a used set? Would also be interested in correct blades and any advice on rebuilding the wiper motor/assembly(or who can do it) or if anyone has a lead on a correct replacement. Best, Freeman Image Unavailable, Please Login Image Unavailable, Please Login Image Unavailable, Please Login Image Unavailable, Please Login
I've seen the "correct" blades at over $100 each. For a throw away piece of rubber? No thanks. My $18 solution to the blade issue. http://ferrarichat.com/forum/showthread.php?t=290005 Addendum. I was wrong. The blades are over $200 EACH!!! Yikes!! http://reoriginals.com/windshieldwiperbladenostricocarellostyle-b0091x.aspx .
Are the Blades "handed" i.e left and right side? Mine sit differently on the screen when changes around.
More accurately, the three pieces are the "arm" which are specific to the various Ferraris, the end "blade holder", made of dual wires on my 1976-77s and then the rubber insert itself... I've bought Ferraris with them on backwards swapped LH for RH, works 'more better' to have them on properly.. No experience with the Dino configuration you have Freeman, good luck though!!! Looking at those, I'd think the flat one should be closing to the lower position, with the other 'bent' one with the offset snuggling on top.......but you really have to watch them as they park, to see how they merge.
