What fender shields would look better on a '78 308 GTS? | FerrariChat

What fender shields would look better on a '78 308 GTS?

Discussion in '308/328' started by Kling, Mar 1, 2011.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. Kling

    Kling Rookie

    Aug 28, 2010
    15
    Milwaukee,WI
    Full Name:
    Chris Kling
    The choices I'm torn between are "Puffy" plastic and flat sticker type.
     
  2. Jedi

    Jedi Moderator
    Moderator Lifetime Rossa Owner

    Mar 18, 2008
    32,273
    Seattle Area
    Full Name:
    Dave
    I'm kind of fond of "none"
     
  3. Rifledriver

    Rifledriver Three Time F1 World Champ

    Apr 29, 2004
    37,104
    Cowboy Capitol of the World
    Full Name:
    Brian Crall
    Thats always been my choice.
     
  4. mike996

    mike996 F1 Veteran

    Jun 14, 2008
    6,871
    Full Name:
    Mike 996
    Mine too.
     
  5. Cornbread

    Cornbread Formula Junior

    Mar 21, 2009
    590
    Bham/Maple Valley WA
    Indeed.
     
  6. Kling

    Kling Rookie

    Aug 28, 2010
    15
    Milwaukee,WI
    Full Name:
    Chris Kling
    Let me add "none" as an option. :)

    Thanks for the honest opinions.
     
  7. 4right

    4right F1 Rookie
    Rossa Subscribed

  8. GrayTA

    GrayTA F1 World Champ
    Owner Rossa Subscribed

    Jun 25, 2006
    15,130
    Deep South
    Full Name:
    PDG
    If you decided to use them then at some point check the Yoshi Shields out. They are the best ones out there.




    PDG
     
  9. Jedi

    Jedi Moderator
    Moderator Lifetime Rossa Owner

    Mar 18, 2008
    32,273
    Seattle Area
    Full Name:
    Dave
    Don't listen to homeless people in Georgia who claim to own Ferraris.....

    :D:D

    Jedi
     
  10. maurice70

    maurice70 F1 Rookie

    Jan 25, 2004
    4,334
    Sydney
    Full Name:
    maurice T
    None of the two that you mentioned,,I put a metal shield on the drivers side only.Looks great to me at least.
     
  11. Jdubbya

    Jdubbya The $10 Trillion Man
    Silver Subscribed

    Dec 28, 2003
    43,198
    PNW
    Full Name:
    John
    I had the metal ones on my car for awhile but ended up taking them off. If you are going to do it at least use the metal/cloisonne ones. I'm not a purist by anybody's standard so I say if you like the look put 'em on and screw what everyone else thinks. It's your car!!
     
  12. Crallscars

    Crallscars F1 Rookie

    Jun 7, 2006
    2,512
    Bainbridge, GA
    Full Name:
    Douglas Crall
    I'll go with 'None"

    If I had to put them on, it would be on my 'Roll Away Tool Box'
     
  13. Steve King

    Steve King F1 Rookie

    Feb 15, 2001
    4,367
    NY
    I would not go with the flat paper type so it would be a choice between the vinyl shield or going with a metal type that you can get on ebay.
     
  14. ggjjr

    ggjjr Formula Junior

    Nov 11, 2003
    929
    Detroit
    Full Name:
    George
  15. pdf308

    pdf308 Formula Junior

    Dec 28, 2009
    278
    Chicago
    Full Name:
    Paul
    I voted for none. I love the look of shields on new cars but 308's never came with them and I think that the original look is cleaner.
     
  16. X11OUD

    X11OUD Formula Junior

    Mar 22, 2008
    729
    Manchester, England
    Full Name:
    Neil
    As you have asked for opinions........... None
     
  17. shmark

    shmark F1 Rookie

    Oct 31, 2003
    2,968
    Atlanta
    Full Name:
    Mark
    I like the shields and personally I would go with the flat ones. They look more like the actual painted/vinyl shields that were used on period race cars and seem more appropriate to me. The metal/cloisonne are just too blingy for my taste, although they are beautifully made. I'm thinking about a set for display in my office instead of on the car.
     
  18. jfortner

    jfortner Karting

    Apr 28, 2010
    177
    Lanexa, VA
    Full Name:
    Joe A Fortner
    I don't have shields on my 328 and do not plan to install any. I think I just voted "NO."
    JAF
     
  19. ramosel

    ramosel Formula 3

    Sep 11, 2004
    1,237
    Meadow Vista, CA
    Full Name:
    R Moseley
    It appears many of my brethren don't really read...

    If you are not going to put the real metal shields on, I think the flat sticker type would be a better choice. The "puffy" plastic ones just look (most) cheesy to me. There are also flat magnetic versions.

    Its your car. I'd suggest getting cheap ones at first - put them on and see if you like them. If you don't like them, take them off. If you do like them, get some real ones and bolt them on... even "French" them in.

    Rick
     
  20. ace_pilot

    ace_pilot Formula Junior

    Sep 6, 2007
    921
    Long Island, NY
    Full Name:
    George
    Wondering if you put the shields on and they stay one for a while, does the paint color underneath not match the rest of the car after a while? Anybody take theirs off and notice a shade of color difference?

    Ace
     
  21. Jdubbya

    Jdubbya The $10 Trillion Man
    Silver Subscribed

    Dec 28, 2003
    43,198
    PNW
    Full Name:
    John
    Nope. I had mine on for probably a year or more and you can't tell where they were. I used double back tape to install them. Used a little heat and dental floss to get them off. Cleaned up the area with some cleaner and buffed it up a bit. Looks just the same as the rest of the car. I suppose if your car was sitting out in the sun and fading a lot it might make a difference, but most of these cars are not out in the sun enough to make a difference.
     
  22. Fairview

    Fairview Formula 3

    Mar 16, 2009
    1,109
    Waynesboro, Virginia
    Full Name:
    Jeff Ward
    #22 Fairview, Jul 21, 2011
    Last edited by a moderator: Sep 7, 2017
    Ace had a question about removing shields and possible paint fade. I was worried about goofing up the paint during removal, or if there were some hidden defect beneath the shields the prior owner installed.

    My 308 had quite nice shields on it, but they were driving me a bit crazy. I think it is because that front fender line, flowing into the door, is such a pretty part of the car. To my eye, the shields detracted from that sweeping body line.
    It was with some fear that I started to remove them. It took careful fiddling, lifting the edges with plastic bicycle tire spoons, then carefully cutting the double sided tape a bit at a time with an Exacto knife. There wasn't any paint fade, no scratches, all nice and clean now.

    If you are on the fence about your shields, you can always put them back on. Here are some photos of before, and after:
    Image Unavailable, Please Login
    Image Unavailable, Please Login
    Image Unavailable, Please Login
    Image Unavailable, Please Login
     
  23. DWPC

    DWPC Formula Junior

    Mar 10, 2011
    733
    Sedona AZ
    Full Name:
    Dennis
    #23 DWPC, Jul 21, 2011
    Last edited: Jul 21, 2011
    If you like the looks of a 4 inch shield on your quarter, go for it and take 'em off when you go to Ferrari events. Its an automobile to enjoy, not a religion. I bought a pair of the magnetic vinyl shields on eBay and I like 'em. Sometimes I put them on and sometimes I don't depending on the level of my purity for the day.
     
  24. miketuason

    miketuason F1 World Champ
    Owner Silver Subscribed

    Feb 24, 2006
    15,811
    Cerritos, CA.
    Full Name:
    Mike
    Use the magnetic ones, that cade you have a choice of None or with.
     
  25. furnacerepair

    furnacerepair Formula Junior

    Feb 9, 2009
    744
    Wisconsin
    Full Name:
    Martini
    #25 furnacerepair, Jul 21, 2011
    Last edited by a moderator: Sep 7, 2017
    My advise is to try the resin ones if you want shields. You can always get the metal ones if you really like the look on your car. My 308 had them on when I bought it 11 years ago. Kept them on for 10 years and decided to remove them. A lttle heat from a hair drier and they came right off. No lasting marks on the paint. I can always put some on if I want. Don't drill holes in the fenders. Get some that stick on. Magnetic ones will fall off. These are only good for tool boxes.
    Image Unavailable, Please Login
     

Share This Page