Need 3 light switch locations for "L" series, front hood, engine lid, trunk lid. | FerrariChat
Buy

Need 3 light switch locations for "L" series, front hood, engine lid, trunk lid.

Discussion in '206/246' started by swift53, Feb 20, 2011.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. swift53

    swift53 F1 Veteran
    Rossa Subscribed

    Nov 17, 2007
    8,304
    E.S.
    Full Name:
    Alberto
    #1 swift53, Feb 20, 2011
    Just realized, I need the location measured in inches or cm., of the front hood, engine lid, trunk lid, light switch locations and sheet-metal bracket shapes, for an "L" series. I am aware of which side of the car they go on, but my car lacks any clues, as they were all ground off by the "usual suspects"... Fortunately, I do have the 3 light assemblies, particularly the real strange one for the engine bay.
    Photos would be great in close detail, as the ones that are available on other cars, are more of a generic sort of view, and are way too small...
    These are the small details that are holding me back on getting closer to painting time.

    Thank you.
    Regards, Alberto`
     
  2. rosso dino

    rosso dino Karting

    Mar 5, 2009
    195
    #2 rosso dino, Mar 5, 2011
    Last edited by a moderator: Sep 7, 2017

    Ciao Alberto!

    Sorry, it takes a little time, but here you are.
    (just a few pics here, sent you some more by e-mail)

    Best regards
    Götz

    1st picture made by Matthias (GermanDino)
    Image Unavailable, Please Login
    Image Unavailable, Please Login
    Image Unavailable, Please Login
    Image Unavailable, Please Login
     
  3. HMB-Dino

    HMB-Dino Formula 3
    Silver Subscribed

    Jun 28, 2010
    2,282
    Pebble Beach, CA
    Full Name:
    RonG
    #3 HMB-Dino, Mar 5, 2011
    Does anybody know of a source for the engine bay light assembly shown in the first picture? Original or repro, doesn't matter. This is the first good picture I've seen of that light.
     
  4. GermanDino

    GermanDino F1 Rookie

    Aug 14, 2007
    3,488
    Germany
    Full Name:
    Matthias
    #4 GermanDino, Mar 5, 2011
    next to impossible to find....
     
  5. swift53

    swift53 F1 Veteran
    Rossa Subscribed

    Nov 17, 2007
    8,304
    E.S.
    Full Name:
    Alberto
    #5 swift53, Mar 5, 2011
    Thank you Götz! Now I can finally get things going.
    Is the bracket for the switch under the front hood welded on ?
    I have seen other L series and 206 with rivets (2 & 3)...

    Regards, Alberto
     
  6. HMB-Dino

    HMB-Dino Formula 3
    Silver Subscribed

    Jun 28, 2010
    2,282
    Pebble Beach, CA
    Full Name:
    RonG
    #6 HMB-Dino, Mar 5, 2011
    Alberto, based on Matthias' comment, if you find a way to fabricate that engine light assembly, you might find buyers for it (besides me)!
     
  7. swift53

    swift53 F1 Veteran
    Rossa Subscribed

    Nov 17, 2007
    8,304
    E.S.
    Full Name:
    Alberto
    #7 swift53, Mar 5, 2011
    Last edited by a moderator: Sep 7, 2017
    Ron, I managed to find one by mistake, sold to me by "experts" that were not quite sure, as on the Scaglietti catalog, it looks even stranger than in real life...
    It is an insanely oddball part that fits in an LSD trip.
    I will show it to a friend that is in the plastics business and see what he thinks, although I doubt it, as the switch is thermally assembled.
    If someone had a junk sample, as I seriously will not open mine up :)
    Regards, Alberto
    Image Unavailable, Please Login
    Image Unavailable, Please Login
    Image Unavailable, Please Login
     
  8. rosso dino

    rosso dino Karting

    Mar 5, 2009
    195
    #8 rosso dino, Mar 5, 2011
    Last edited by a moderator: Sep 7, 2017
    The way I see it, it is welted on (better to say "under") the gutter, but you are much more specialized in metal works than me.

    BTW: Will also take one or two of that engine light if your friend that is in the plastics business will find a way to reproduce it.
    Image Unavailable, Please Login
     
  9. GermanDino

    GermanDino F1 Rookie

    Aug 14, 2007
    3,488
    Germany
    Full Name:
    Matthias
    #9 GermanDino, Mar 5, 2011
    I would take three....
     
  10. Nuvolari

    Nuvolari F1 Veteran
    Owner Silver Subscribed

    Sep 3, 2002
    6,638
    Toronto / SoCal
    Full Name:
    Rob C.
    #10 Nuvolari, Mar 5, 2011
    Is this switch only for the L series or do the M and E series cars also use them?
     
  11. HMB-Dino

    HMB-Dino Formula 3
    Silver Subscribed

    Jun 28, 2010
    2,282
    Pebble Beach, CA
    Full Name:
    RonG
    #11 HMB-Dino, Mar 5, 2011
    See! I told you there would be a market out there for these.
     
  12. HMB-Dino

    HMB-Dino Formula 3
    Silver Subscribed

    Jun 28, 2010
    2,282
    Pebble Beach, CA
    Full Name:
    RonG
    #12 HMB-Dino, Mar 5, 2011
    If you're referring to the engine bracket/light, I believe I recall Matthias saying that it was only on L and at least a portion (maybe all?) of M. My M-Series (#01712) has the engine bracket.
     
  13. GermanDino

    GermanDino F1 Rookie

    Aug 14, 2007
    3,488
    Germany
    Full Name:
    Matthias
    #13 GermanDino, Mar 5, 2011
    206 GT, L-series and M-series
    not for E-series
     
  14. swift53

    swift53 F1 Veteran
    Rossa Subscribed

    Nov 17, 2007
    8,304
    E.S.
    Full Name:
    Alberto
    #14 swift53, Mar 5, 2011
    Last edited: Mar 5, 2011
    OK Ron, I'll find out. I know Matthias is a known factor in switches, ans so would be Götz ;-)
    I am also certain that the ebay 206 is probably missing his?
    Regards, Alberto
     

Share This Page