Fabspeed Headers & sport-cats on my 360 | FerrariChat
Buy

Fabspeed Headers & sport-cats on my 360

Discussion in '360/430' started by f0430z, May 2, 2011.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

Page 1 of 2
  1. f0430z

    f0430z Karting

    Sep 27, 2008
    91
    Ontario, Canada
    Full Name:
    fz
    #1 f0430z, May 2, 2011
    On Saturday I finally had the pleasure to go and pick up my 360 from Ferrari service... after a fresh fluid exchange and installation of Fabspeed's headers. Now my set up is Fabspeed's header + sport cars + airboxes + Tubi mufflers = holy !@#$% it sounds amazing. Last year i had a few Maseratis' drive by sounding more like Ferrari than mine did??!! I had to put an end to that :)

    To be honest I was quite scared for the first 5seconds... is it too much? NOT at all!!! I believe this is the best set up when cruising it prrrrs when I hammer-it IT screams.

    I'd like to thank Fabspeed for their design and craftsmanship - PERFECTION!

    BTW the throttle response is much more responsive in my opinion!

    Besides the real Formula 1 sound now my engine-bay is complete... showing off the chromed headers - looks like real F1 engine.

    I'll post a sound clip soon. I'd love to hear from other owners and their set up.
     
  2. F430addict

    F430addict F1 Rookie

    Sep 17, 2010
    4,460
    #2 F430addict, May 2, 2011
    U mean the headers can be seen thru the engine bay in a 360? Coz I cant see mine in my 430.

    I think you were referring to the tubi muffler.
     
  3. crapking

    crapking Karting

    Feb 4, 2006
    238
    Houston Tx
    Full Name:
    Robert
    #3 crapking, May 2, 2011
    No, he's right. You can see the headers. I have the same setup but with a Larini and holy crap! What a sound!
    Glad your enjoying it
     
  4. JTStreet

    JTStreet Rookie

    Mar 8, 2011
    20
    Charleston, SC
    Full Name:
    Jonathan
    #4 JTStreet, May 2, 2011
    I'd really like to see a video. Subscribed. :)
     
  5. rmani

    rmani F1 Veteran
    Owner Silver Subscribed

    Nov 1, 2003
    7,334
    NJ
    Full Name:
    RMani
    #5 rmani, May 2, 2011
    video + pics please
     
  6. f0430z

    f0430z Karting

    Sep 27, 2008
    91
    Ontario, Canada
    Full Name:
    fz
    #6 f0430z, May 2, 2011
    No if you look through the glass on either side of the engine you can see them... Obvious u need to know what u are looking for as they are tucked away.

    Even the service manager was impressed with the craftsmanship of the headers... It's always nice to add a little something every ever. Keeps life exciting.
     
  7. Fabspeed Motorsport

    Fabspeed Motorsport F1 Rookie
    Sponsor

    Feb 5, 2009
    3,147
    Fort Washington, PA
    Full Name:
    John S
    #7 Fabspeed Motorsport, May 3, 2011
    Last edited by a moderator: Sep 7, 2017
    Thank you for the kind words about our headers. The picture below is not the OP's car, but it is a 360 that was in our shop a few months ago for a header install. Notice the Fabspeed headers poking out a bit. Please let me know if you have any questions. Thanks!

    Jeff

    [email protected]
    Image Unavailable, Please Login
     
  8. THINKFAST

    THINKFAST Karting

    Jan 13, 2011
    195
    Earth, mostly ...
    #8 THINKFAST, May 4, 2011



    Hey, I picked my car up on Friday.I saw your 360.Very ,Very Nice.I seen the set up right away.CF intakes with red connectors were also perfect.I heard your car coming out of the service bay,WOW!! Sound clip wont do it justice.Amazing,congrats,enjoy!! Im sure it was yours,plates on car started with a "Z" and ended with an "I"
     
  9. FAST348

    FAST348 Karting

    Dec 31, 2006
    100
    West Central Ohio
    Full Name:
    Aric
    #9 FAST348, May 4, 2011
    I agree w/everything you say. I had Fabspeed headers and sport cats installed last Fall (already had the Tubi) and the sound is now as close to F1 as you can get! The car feels like it got a 50hp boost and oh did I mention the sound! Not to mention the beautiful headers in the engine bay. Sheer joy, now the car sounds like a Ferrari!
     
  10. F430addict

    F430addict F1 Rookie

    Sep 17, 2010
    4,460
    #10 F430addict, May 4, 2011
    Very nice! That must be tdf blue. Very neat engine bay!
     
  11. f0430z

    f0430z Karting

    Sep 27, 2008
    91
    Ontario, Canada
    Full Name:
    fz
    #11 f0430z, May 4, 2011
    Busted :) yes that's my car. Not much left to add but maybe a challenge grill. So you believe me when I said "when I first started it... I got scared" - in a good way.
    I'm going to attempt a sound clip, we will see how it turns out.
     
  12. THINKFAST

    THINKFAST Karting

    Jan 13, 2011
    195
    Earth, mostly ...
    #12 THINKFAST, May 5, 2011
    Yes ,do the challenge grill.I ordered one for my 360.My Tubis get hot,cooling things back there is a must.It also adds a different look to the rear.Guys,you must hear his car.
     
  13. bobaloof16

    bobaloof16 Rookie

    Aug 4, 2007
    36
    AZ, MO
    Full Name:
    Bob R
    #13 bobaloof16, May 5, 2011

    I have a 360 totally stock - where to start? I love the Tubi sound, so I want your exact setup I think. Did you have Tubi installed on your stock setup and then go the Fabspeed way? Looking for your recommendations.
     
  14. rmani

    rmani F1 Veteran
    Owner Silver Subscribed

    Nov 1, 2003
    7,334
    NJ
    Full Name:
    RMani
    #14 rmani, May 5, 2011
    did you have to install any type of heat shielding with the fabspeed headers? someone told me the tubi headers come with heat shielding but is that really necessary?
     
  15. Tio

    Tio Formula Junior

    Mar 26, 2011
    391
    London
    Full Name:
    Harry
    #15 Tio, May 5, 2011
    +1 here too!

    Do you think it is always wise to have the heat shield on them?
    Capristo do an amazing heat shield, check it on their website.
     
  16. f0430z

    f0430z Karting

    Sep 27, 2008
    91
    Ontario, Canada
    Full Name:
    fz
    #16 f0430z, May 5, 2011
    Hey... not sure what your budget is. Mine came with Tubi, but I know that Fabspeed has a really nice exhaust system - to consider! I would contact Jeff ([email protected]) and see what they can do for you if you buy the complete package. I did Pre-cats an Airboxes last year and headers this year. I honestly think this is the best upgrade you can do to any 360 it really wakes up the car. The craftsmanship of Fabspeed products is second to none! Good luck and have fun.
     
  17. f0430z

    f0430z Karting

    Sep 27, 2008
    91
    Ontario, Canada
    Full Name:
    fz
    #17 f0430z, May 5, 2011
    It came with heat shields too - which I installed.
     
  18. Fabspeed Motorsport

    Fabspeed Motorsport F1 Rookie
    Sponsor

    Feb 5, 2009
    3,147
    Fort Washington, PA
    Full Name:
    John S
    #18 Fabspeed Motorsport, May 5, 2011
    I am glad you are loving the sound with our products! The 360 headers include a heat shield and I would recommend using them. I can't think of why you wouldn't want to... they should only take 10-15 minutes per side to fit.

    Regarding our products, the headers, sport cats, and airboxes combine to make a great increase in power and sound. Our muffler is great and made slightly more power than the Tubi on our dyno. The sound is a little deeper than the Tubi... I guess it really depends what type of sound you are looking for. Plus we will be less expensive :)

    Please feel free to contact me via PM, email, or phone for more info.

    Thanks!

    Jeff
    [email protected]
    215-646-4945
     
  19. rmani

    rmani F1 Veteran
    Owner Silver Subscribed

    Nov 1, 2003
    7,334
    NJ
    Full Name:
    RMani
    #19 rmani, May 5, 2011
    Is heat shielding necessary if you get the headers ceramic coated?
     
  20. ewright

    ewright Formula Junior

    Nov 17, 2003
    612
    #20 ewright, May 5, 2011
    subscribed...cant wait for the sound clip!
     
  21. Fabspeed Motorsport

    Fabspeed Motorsport F1 Rookie
    Sponsor

    Feb 5, 2009
    3,147
    Fort Washington, PA
    Full Name:
    John S
    #21 Fabspeed Motorsport, May 6, 2011
    After speaking with a few more people regarding the heat shielding, it is recommended but not mandatory. We do have a few customers who do not use them and we have not had a problem. The main reason for them is to reflect heat away from other components in the same area, especially the air conditioning compressor.

    The ceramic coating may help the temps a bit, but personally, I would skip the coating and fit the heat sheilds.

    Jeff
    [email protected]
     
  22. Gh21631

    Gh21631 F1 Veteran
    Silver Subscribed

    Feb 24, 2011
    9,218
    East
    #22 Gh21631, May 6, 2011
    Next week I will have the nouvalari exhaust and fabspeed cat bypass pipes installed. I will post pics and sound file. Stay tuned. Not a pun.
     
  23. rmani

    rmani F1 Veteran
    Owner Silver Subscribed

    Nov 1, 2003
    7,334
    NJ
    Full Name:
    RMani
    #23 rmani, May 6, 2011
    Interesting. How heavy is the heat shielding? I assume it doesn't add much weight right?
     
  24. Need4Spd

    Need4Spd F1 Veteran

    Feb 24, 2007
    6,678
    Silicon Valley
    #24 Need4Spd, May 6, 2011
    The heat shielding that comes with the Fabspeed headers (based on pics I've seen) consist of bolted-on metal plates that deflect the heat away from the parts being protected. I would definitely use them if I got their headers.

    And speaking of heat shielding, do the Capristo "wrap"-type shields fit Fabspeed headers with no interference problems? They don't touch anything do they, once installed over the Fabspeed headers?

    I know it's pricey, but if/when I get Fabspeeds I want to use the Capristo shielding with them. It will greatly reduce engine compartment temps (which can only prolong the life of all the components in there) and reduce the chance of a fire should any flammable liquids ever leak or spill.
     
  25. Tio

    Tio Formula Junior

    Mar 26, 2011
    391
    London
    Full Name:
    Harry
    #25 Tio, May 7, 2011

    +1
    I am with you on this too.
    If only Fabspeed had the same heat shield as Capristo, I would also be interested in their header and cat set up, but I dont want to compromise the reliability of other parts.
     
Page 1 of 2

Share This Page