Seatback Release lever | FerrariChat
Buy

Seatback Release lever

Discussion in '348/355' started by gcthree, Jun 12, 2011.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. gcthree

    gcthree Formula Junior

    Jul 18, 2008
    323
    Williamsburg, Va.
    #1 gcthree, Jun 12, 2011
    Last edited by a moderator: Sep 7, 2017
    Disatisfied with the re-dye of my driver's seat, I've elected to reupholster both seats (so they match), and have gotten the kit through Cabrio World. The actual product is made by GAHH in Calif, and the leather and finishing looks perfect.

    I will be doing the reupholstering myself and will post photos of the process shortly as I progress, so stay tuned.

    Anybody know how to remove the seatback release levers on both sides of the seat back? (see attached schematic).

    Thanks!
    Bob
    Image Unavailable, Please Login
     
  2. gcthree

    gcthree Formula Junior

    Jul 18, 2008
    323
    Williamsburg, Va.
    #2 gcthree, Jun 13, 2011
    Any ideas or suggestions?
     
  3. X11OUD

    X11OUD Formula Junior

    Mar 22, 2008
    729
    Manchester, England
    Full Name:
    Neil
    #3 X11OUD, Jun 13, 2011
    Well if it is like many of the other seats I've stripped it will be forced on over the metal release arm, most are an interference fit.
    I would check that there are no signs of a release clip underneath the handle where it meets the metal arm, if not, then apply some pressure, I use a trim puller and protect the leather and the delicate surround with another piece of thick leather.

    Good luck
     
  4. gcthree

    gcthree Formula Junior

    Jul 18, 2008
    323
    Williamsburg, Va.
    #4 gcthree, Jun 13, 2011
    That makes sense. Thanks for the kind reply.
     
  5. gcthree

    gcthree Formula Junior

    Jul 18, 2008
    323
    Williamsburg, Va.
    #5 gcthree, Jun 13, 2011
    It worked. Thanks!
     
  6. X11OUD

    X11OUD Formula Junior

    Mar 22, 2008
    729
    Manchester, England
    Full Name:
    Neil
    #6 X11OUD, Jun 14, 2011
    It's one of those things that's is best to double check first! Glad you got it sorted :)
     
  7. full_garage

    full_garage Formula 3
    Owner

    Feb 15, 2010
    2,241
    Sarasota Florida
    Full Name:
    Jay
    #7 full_garage, Jun 14, 2011
    Would love for you to give us a blow-by-blow with photos- Last seats i reupholstered were a 73 Alfa Spider and it was a ROYAL PITA.
     

Share This Page