A/C recharge 2001 360 HELP | FerrariChat

A/C recharge 2001 360 HELP

Discussion in 'Technical Q&A' started by syrinx001, Aug 21, 2011.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. syrinx001

    syrinx001 Rookie

    Joined:
    Jun 8, 2011
    Messages:
    18
    Location:
    Las Vegas NV
    Full Name:
    Tony
    The a/c in my Modena is a bit warm. I have all the tools to do the work but want to make sure I'm doing it right. Does anybody have the instructions to do so? Also is it r-12 or 134


    Thanks
     
  2. FerrariDublin

    FerrariDublin F1 Rookie

    Joined:
    Jun 14, 2009
    Messages:
    3,454
    Location:
    Dublin, Ireland
    Full Name:
    Greg
  3. tazz99

    tazz99 F1 Rookie Rossa Subscribed

    Joined:
    Sep 16, 2007
    Messages:
    4,451
    Location:
    Kennesaw, GA
    Full Name:
    Seth
    Tony,
    I am not trying to be offensive here, but seriously, if you are not aware of the type of freon in your 2001 automobile perhaps you should have this recharge performed by someone with a bit more knowledge. Most 1994 and newer cars use R134a, as does your 2001 360.
     
  4. burner42

    burner42 Formula Junior

    Joined:
    Jan 21, 2011
    Messages:
    624
    Location:
    Dallas, Texas
    Full Name:
    Myles
    I did it the easy way, took my car to my Ferrari Mechanic and paid him $180 to completely check the systems for leaks and also add freon. I didnt even break a sweat!
     
  5. syrinx001

    syrinx001 Rookie

    Joined:
    Jun 8, 2011
    Messages:
    18
    Location:
    Las Vegas NV
    Full Name:
    Tony
    FerrariDublin

    thanks, that is just what i neede, real easy to get to and had it done in 15 min, thank you again
     
  6. FerrariDublin

    FerrariDublin F1 Rookie

    Joined:
    Jun 14, 2009
    Messages:
    3,454
    Location:
    Dublin, Ireland
    Full Name:
    Greg
    Fáilte! (and fair whack for doing it yourself too!)
     
  7. netman

    netman Formula 3

    Joined:
    Jun 17, 2008
    Messages:
    1,905
    Location:
    OC SoCal
    Syrinx
    I appreciate your wanting to work on your fcar. Too many owners fear their cars. Even owners who work on other cars. Have a look at your compressor. It will detail the type of gas used to cool the AC. Next find the charging ports. These will look like tire air valves. The one closest to the compressor should be the high side. connect your gauges with the three valves closed tight. start the car and turn on the AC. If the compressor kicks in you will notice that one or your gauges reads higher than the other. If one of the gauges reads off of the chart pass the highest level, you probably have the gauges crossed. Shut down the card and reverese the connections at the car end. Not the gauge end.
     
  8. vrsurgeon

    vrsurgeon F1 World Champ Silver Subscribed

    Joined:
    Dec 13, 2009
    Messages:
    16,528
    Location:
    Charleston, SC
    Full Name:
    Curt
    left port low pressure side, r134a, should read about 2 bar (28 psi) running.
     
  9. PAP 348

    PAP 348 Ten Time F1 World Champ Lifetime Rossa Owner

    Joined:
    Dec 10, 2005
    Messages:
    100,220
    Location:
    Mount Isa, Australia
    Full Name:
    Pap
    You shouldn't be able to get that part wrong, the low and high charging ports are different sizes. :):)

    Yes sir. :):)

    Low side between 20-30 psi.

    High side between 200-250 psi.
     

Share This Page