Nice Ad for FCRA and FerrariChat | FerrariChat

Nice Ad for FCRA and FerrariChat

Discussion in 'Other Racing' started by gatorgreg, Dec 1, 2011.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. gatorgreg

    gatorgreg Formula 3 Rossa Subscribed

    Joined:
    Dec 13, 2004
    Messages:
    1,944
    Location:
    NAPLES
    Full Name:
    Greg Griffin
    Last edited: Dec 1, 2011
    gatorgreg, Dec 1, 2011
    #1
  2. rob lay

    rob lay Administrator Staff Member Admin Miami 2018 Owner Social Subscribed

    Joined:
    Dec 1, 2000
    Messages:
    64,004
    Location:
    Southlake, TX
    Full Name:
    Rob Lay
    very nice, I still can't believe how many events they do.
     
    rob lay, Dec 1, 2011
    #2
  3. jakermc

    jakermc Formula 3 Owner

    Joined:
    Jan 17, 2004
    Messages:
    1,804
    Location:
    Palm Beach, FL
    Full Name:
    Rob
    Re-valved? Cheater!! LOL

    Your car looks awesome in that pic! Love the front splitter you have, if I remember right you have the center section higher, just like the factory did to allow airflow under the middle of the car? That's the only one I have seen like that, very trick and well executed.

    I noticed Chin goes to Watkins Glen often, would be nice to pair up with them (or anyone) for that. It's another on my 'wish list' of tracks.
     
    jakermc, Dec 1, 2011
    #3
  4. redcar1

    redcar1 Formula Junior

    Joined:
    Nov 3, 2003
    Messages:
    628
    Location:
    austin, tx
    Full Name:
    Mark
    Very nice! Great looking car!

    Re-valved Shocks = Illegal? :) Right?? And, what about that splitter? And, that front ride height looks awfully low, let me dig out my 1997 rulebook....... J/K!

    Mark
     
    redcar1, Dec 1, 2011
    #4
  5. vlamgat

    vlamgat Formula Junior

    Joined:
    Jan 9, 2004
    Messages:
    776
    Just did - and its kinda vague as the aero was specified by a kit (not what's in it) and the springs, bars and shocks by part number.

    In World Challenge, the turbos are being milled to accept different internal wheels generating more CFM at teh same boost pressure. Resulting in more torque at the same hp by reducing the red line. Verrrrry clever as its not detectable in tear down (same part numbers on the turbo nor by the boost sensor that t/c cars have to carry nor on the dyno as the car apparently peaks at the same hp as previously seen. Fatter torques (as Jeremy would say) that SCCA does not quite understand. Being that HP is derived from torque and not the other way around as most seem to believe.
     
    vlamgat, Dec 1, 2011
    #5
  6. gatorgreg

    gatorgreg Formula 3 Rossa Subscribed

    Joined:
    Dec 13, 2004
    Messages:
    1,944
    Location:
    NAPLES
    Full Name:
    Greg Griffin
    Thank you. The front splitter, are you ready for this? It's not the carbon fiber one. It's the fiberglass mold. LOL~. It's about 40 pounds. That's how cheap I am.
     
    gatorgreg, Dec 1, 2011
    #6
  7. gatorgreg

    gatorgreg Formula 3 Rossa Subscribed

    Joined:
    Dec 13, 2004
    Messages:
    1,944
    Location:
    NAPLES
    Full Name:
    Greg Griffin
    Yes, Illegal shocks.....you got me.....throw me FCRA prison!!

    I think I missed that drivers meeting........RULEBOOK 1997? I must of slept in.
     
    Last edited: Dec 1, 2011
    gatorgreg, Dec 1, 2011
    #7
  8. jakermc

    jakermc Formula 3 Owner

    Joined:
    Jan 17, 2004
    Messages:
    1,804
    Location:
    Palm Beach, FL
    Full Name:
    Rob
    That's a 10 spot grid penalty for missing the meeting. :)

    Please post some more pics of the car, that really is a good looking ride!
     
    jakermc, Dec 1, 2011
    #8
  9. gatorgreg

    gatorgreg Formula 3 Rossa Subscribed

    Joined:
    Dec 13, 2004
    Messages:
    1,944
    Location:
    NAPLES
    Full Name:
    Greg Griffin
    Last edited by a moderator: Sep 7, 2017
    gatorgreg, Dec 2, 2011
    #9

Share This Page