575 19 inch Mods on Panamera | FerrariChat

575 19 inch Mods on Panamera

Discussion in '456/550/575' started by Sir Paul, Dec 19, 2011.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. Sir Paul

    Sir Paul Formula Junior

    Joined:
    Feb 22, 2008
    Messages:
    537
    Location:
    HONG KONG
    Xmas Quiz folks!
    I am sure that today, I saw some Ferrari 575 19 inch 3 part modulars on a Porsche Panamera. They sure looked like them.
    Might that be physically possible or is there something in the Panamera wheel options that looks so similar?
    Merry Xmas
    PAUL
     
    Sir Paul, Dec 19, 2011
    #1
  2. fatbillybob

    fatbillybob Two Time F1 World Champ Consultant Owner

    Joined:
    Aug 10, 2002
    Messages:
    29,067
    Location:
    socal
    shutter the thought! Only a Pguy would do that. I'd rather eat a moldy piece of toast than put 575 wheels on that pig.
     
    fatbillybob, Dec 19, 2011
    #2
  3. Sir Paul

    Sir Paul Formula Junior

    Joined:
    Feb 22, 2008
    Messages:
    537
    Location:
    HONG KONG
    Is that a yes possible or a no, not possible?

    My question was based on a statement of apparent fact, not a statement of admiration or good judgement!

    If that were the case I would question the sanity of someone buying a Panamera to go with his cast off 575 wheels. A pig indeed, and a fat one at that.
     
    Sir Paul, Dec 19, 2011
    #3
  4. fatbillybob

    fatbillybob Two Time F1 World Champ Consultant Owner

    Joined:
    Aug 10, 2002
    Messages:
    29,067
    Location:
    socal
    Sir paul I do not know the Ferrari is 5x108mm iirc. If you search Pbugs maybe you can find their bolt pattern. That would be a start to see if remotely possible. Then you need to worry about offset which can be fudged with spacers very ghetto-like and clearance for brakes.
     
    fatbillybob, Dec 19, 2011
    #4
  5. ferrame

    ferrame Formula 3

    Joined:
    Mar 2, 2005
    Messages:
    1,196
    Location:
    Orange, Calif
    Hey Carl,

    That's got to be the best laugh I have today, LOL.

    Happy Holidays,
     
    ferrame, Dec 19, 2011
    #5
  6. tazandjan

    tazandjan Three Time F1 World Champ Lifetime Rossa Owner

    Joined:
    Jul 19, 2008
    Messages:
    39,195
    Location:
    Clarksville, Tennessee
    Full Name:
    Terry H Phillips
    Paul- Porsche Panamera wheels use a 5x130 mm bolt pattern. Not even close.
     
    tazandjan, Dec 19, 2011
    #6
  7. Sir Paul

    Sir Paul Formula Junior

    Joined:
    Feb 22, 2008
    Messages:
    537
    Location:
    HONG KONG
    Thanks Taz. I suspected you would come up with a definitive answer pretty damn quick!
    I wonder what they were then?
    I shall have to keep my eyes peeled to see the car again another morning en route to office.
    PAUL
     
    Sir Paul, Dec 20, 2011
    #7

Share This Page