Hello i'm Wendy from Holland I'm searshing for a long time all over the world for two window control units (partnumber 153096) for our ferrari 456gt from 1994. Is there someone who have those in stock? new, used or even broken is not a problem. kind regards Wendy
Wendy- Fix them and do not replace them. New ones will eventually exhibit the same problems. F1 Imports & Exotics 568 Industrial Blvd. Naples, Florida 34104 Tel. (239)430-2206 [email protected] http://www.f1imports.com 456 Window Regulators We have had a fantastic response to our repair for the 456 window regulators. We have a repair and return service. If you or the shop you are bringing your car to removes and sends the regulator to us, we will repair it and send it back. The repair will cost $197.49 plus shop supplies and tax. (Tax only applicable in Florida) Call or e-mail. [email protected] or 239-430-2206 We are now able to do this repair on most all Late Model Ferrari's and Maserati's!!!!!!!!!!!!
Hallo Wendy, wat is precies het probleem? Ik had ook ooit problemen met mijn 456 ramen maar dat lag niet aan de units. Kan je er alles over vertellen. Grt
Assuming you want the window ECU as your part number indicates: http://www.fmscarparts.com/product_info.php?products_id=153096 I got mine with them; not cheap, but these are getting hard to find...
Please correct me if I am wrong. The regulators for the 456 and 456M are different The latter regulators are available from ferrparts but dont seem to work on the 456(early models). I dried mine, sprayed with clear laquer,wrapped it in plastic before reinstalling in door and so far its fine.
Nope you're not wrong. First and second generation units are different. The older type units fail sometimes because of water ingress, especially if the garage mechanic working on the window regulator does a bad job with re-installing the water shielding. The door wiring is another problem sometimes.
