360 fins

You didn't have to take your wheels off, just tighten the bolts from the upper side of the engine bay. Unless you have the factory exhaust.

 

addie, show us some pictures of your work.

I agree with djastral69, you don't have to remove the rear wheels unless you have a stock exhaust.

I installed mine with help from djastral69 and they turned out great. Picture of mine below:
Image Unavailable, Please Login

 

I do very much like these, looking forward to seeing more pictures!

 

How much are these and where did you get them?

 

I like that!!

 

Looks good!

 

The prosport fins do not come with a template. Could you share some measurements for correct placement? I'm getting these fins as well.
Thanks, Nate

 

I got my fins and installed them the same night with help from djastral69. He installed his first. I got my measurements from him. I would send a private message to djastral69 or maybe he will post them. I don't recall the measurements.

They DO NOT come with instructions or template. The main thing is to make sure they are straight before drilling. I used 1" blue masking tape as my template.

The fins were about $508 including shipping.

Good luck with your installation. Just take your time.

Oh, forgot to mention, they match the rest of the underneath bumper area perfect. Looks like an OEM part.

 

nice congrats

 

Thanks, going to order them next week.
Nate

 

They look great. I have seen others, that look very much like a stick-on accessory. - any chance of some more pics?

 

Good luck with your installation! I ordered mine on a Thursday afternoon and had them by Wednesday all the way from the U.K. to California. I will post more pics tomorrow.

 

Vreee nice!!!!

 

Ok, more pics below.

See before and after.
Image Unavailable, Please Login
Image Unavailable, Please Login

 

very nice looks amazing

 

tomorrow i am going to update a picture of my engine ,did two changes that looks amazing

 

I can't wait to see the updates!

 

Thanks for the extra pics - they indeed look great. Any chance of you fly down under (at your expense) and fitting some to my 360?......

was worth asking!

 

They look great thanks for sharing, gives the rear end a more aggressive look! I'm gonna order a set next week!

 

Hey Margarita, where's the update pictures of your engine?? Come on now! You can't keep us waiting! LOL

 

Has anyone had any bad experiences with these fins? Breaking off, bending, etc?

 

anyone have pics of the fins from a distance?

 

Squint...Lol. They look buddy, fills in the gaps very nicely.

 

I have only had mine for a few weeks and they are very sturdy. They aren't moving anywhere. They sit in the pocket area and I don't know how you could break them. The fins are a solid material and won't bend.