Specs for Shields | FerrariChat

Specs for Shields

Discussion in 'Ferrari Discussion (not model specific)' started by venusone, Feb 26, 2012.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. venusone

    venusone F1 Rookie

    Joined:
    Mar 20, 2004
    Messages:
    3,238
    Is there a precise spot for the fender shield? Ferrari factory guidelines of where it should go w/ exact measurements for a 328? Where does one get shield from today?
     
    venusone, Feb 26, 2012
    #1
  2. jrinehart

    jrinehart Formula Junior

    Joined:
    Jan 30, 2009
    Messages:
    578
    Location:
    Chambersburg, PA
    Full Name:
    John Rinehart
    jrinehart, Feb 26, 2012
    #2
  3. Fan512bbi

    Fan512bbi Two Time F1 World Champ BANNED

    Joined:
    Mar 25, 2004
    Messages:
    20,938
    Location:
    Wales-UK
    Full Name:
    Steve.
    Maybe ask in the 308/328 section and someone can show you photos of theirs :)
     
    Fan512bbi, Feb 27, 2012
    #3
  4. vaccarella

    vaccarella Formula 3

    Joined:
    Apr 16, 2011
    Messages:
    2,291
    Full Name:
    Paul
    There is no precise spot because no road cars left the factory with these things stuck on. Your 328 is better off without them, imo. If you insist, Google the 308 Michelotto - it is probably as good a guide as any.
     
    vaccarella, Feb 27, 2012
    #4
  5. paulie_b

    paulie_b F1 Veteran Consultant Owner

    Joined:
    Jan 13, 2003
    Messages:
    6,842
    Location:
    Jupiter, FL
    Full Name:
    Paul Bianco
    PM to me your email address and I will send the details to you.
     
    paulie_b, Feb 27, 2012
    #5
  6. jrinehart

    jrinehart Formula Junior

    Joined:
    Jan 30, 2009
    Messages:
    578
    Location:
    Chambersburg, PA
    Full Name:
    John Rinehart
    jrinehart, Feb 28, 2012
    #6

Share This Page