Power Antenna

Here are a couple threads on this subject one specific to the 82 GTSI

http://www.ferrarichat.com/forum/showthread.php?t=310837&highlight=antenna+replacement

http://www.ferrarichat.com/forum/showthread.php?t=114607&highlight=antenna+replacement

If you want more info do a search for antenna replacement. There are a number of threads on the subject.

 

I got a new autovox old stock for mine recently from italy off the internet.

 

I did also. Have you installed it yet?

 

Mine was made by Bosch, and is NLA for years now....the Germans still make a unit for Mercedes that should fit, but may take some engineering at the mounting hole that pokes through the trunk.

 

Another option is the Harada (sp) but this requires the addition of a rely. Search for other threads and there will be a diagram for the relay.

I purchased a Harada but the mounting is slightly different. I am now pondering how best to modify it to maintain a more original look.

The good news is they only cost $13 and the relay is about the same.

 

The Autovox fitted no problem, just needed to find a longer piece of drain pipe from the bottom to the drain plug, very pleased and all is oem again.

 

Next time you get a chance could I ask a favour? Please measure the extended length of your new unit. I live in a pretty mountanous area and before I change the aftermarket that I have in there now I want to make sure that I am improving the situation not making it worse. Thanks ahead of time. From the tip to the fender.

 

Just for your information, I bought an original, OEM, Bosch Autojet II antenna on E-Bay a few months ago for about 100 euros, just to have it for spare. I don't even know if it works, it is still in its original packing, under a transparent blister...

 

It's a Hirschmann Antenna


http://www.conrad.fr/antenne_telescopique_motorisee_argent_hirschmann_p_48453_48580_835182_309775


http://www1.produktinfo.conrad.com/datenblaetter/300000-324999/319288-da-01-ml-Hirschm_Motor_Versenkantenne_de_en_fr.pdf

 

What is the Hirschman? Is this for the QV with the switch to raise and lower or the radio to control?

 

Hi Crowndog

The Autovox measures 993mm when fully up , hope this helps.

JK

 

or 39.1 inches Thank you JK!

 

I've got my original in a box in storage. I replaced the original semi-automatic (goes up and down with the toggle switch) with a automatic (up and down when the radio is on). It is an OEM chrome. Contact me if you are interested.

Henry