Reproduction centers for straight ear knock-offs | FerrariChat

Reproduction centers for straight ear knock-offs

Discussion in 'Vintage (thru 365 GTC4)' started by PFSEX, Jun 6, 2012.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. PFSEX

    PFSEX Formula Junior

    Joined:
    Jun 30, 2006
    Messages:
    843
    Location:
    Las Vegas
    Full Name:
    John Ratto
    Hi all

    I found a source for the center emblem used for the staight ear knock-offs used on 275s and 330s with 14 inch alloy wheels (campagnolos).

    Not appropriate for wire wheels that use K-O with angled ears.

    These have the raised Ferrari horse and the arrow below. Exact copy of the originals that haven't been available forever.

    I can get a better deal if I buy more than one set. Anyone interested?

    PM if interested.
     
  2. lancia

    lancia Formula Junior

    Joined:
    Jan 18, 2004
    Messages:
    578
    Newco Products offers these but they are not correct. They are missing the intermediate ridge and step in the disc surface, separating the zone of the arrow from that of the horse.
     
  3. shaughnessy

    shaughnessy Formula 3 Rossa Subscribed

    Joined:
    Apr 1, 2004
    Messages:
    1,869
    Location:
    Wolfeboro NH
    Full Name:
    Thomas E Shaughnessy
    Last edited by a moderator: Sep 7, 2017
  4. Napolis

    Napolis Three Time F1 World Champ Honorary Owner

    Joined:
    Oct 23, 2002
    Messages:
    32,118
    Full Name:
    Jim Glickenhaus
    Do keep in mind when judging Ferrari's that "Borani" is wrong for 1947 KO's which should be "Rudge Whitworth".
     
  5. shaughnessy

    shaughnessy Formula 3 Rossa Subscribed

    Joined:
    Apr 1, 2004
    Messages:
    1,869
    Location:
    Wolfeboro NH
    Full Name:
    Thomas E Shaughnessy
    Correct until 1953 ish

    Concours note updated and reconfimed


    :)
     
  6. lancia

    lancia Formula Junior

    Joined:
    Jan 18, 2004
    Messages:
    578
    Yes Tom, that's it.
     
  7. PFSEX

    PFSEX Formula Junior

    Joined:
    Jun 30, 2006
    Messages:
    843
    Location:
    Las Vegas
    Full Name:
    John Ratto
    The one shown in the photo with the step may be an original - it is definitely different that what I was shown.

    Alos, the one in the photo has already been 'worked' many times - the relief and detail on the horse has all but disappeared. My originals are in about that same condition.
     
  8. shaughnessy

    shaughnessy Formula 3 Rossa Subscribed

    Joined:
    Apr 1, 2004
    Messages:
    1,869
    Location:
    Wolfeboro NH
    Full Name:
    Thomas E Shaughnessy
    The one in photo is brand center cap, laser cut.
    Extremely high definition and very sharp
    Never chromed

    I have a full set
     
    Last edited: Jun 8, 2012
  9. 275GTB

    275GTB Formula 3

    Joined:
    Jan 12, 2010
    Messages:
    1,967
    Location:
    London
    Full Name:
    Mark McCracken
    Last edited by a moderator: Sep 7, 2017
  10. 275GTB

    275GTB Formula 3

    Joined:
    Jan 12, 2010
    Messages:
    1,967
    Location:
    London
    Full Name:
    Mark McCracken
    do you have a picture of the set you were shown?

    thanks Mark
     
  11. Vintage V12

    Vintage V12 Formula 3

    Joined:
    Aug 11, 2004
    Messages:
    1,451
    Last edited by a moderator: Sep 7, 2017
  12. PFSEX

    PFSEX Formula Junior

    Joined:
    Jun 30, 2006
    Messages:
    843
    Location:
    Las Vegas
    Full Name:
    John Ratto
    I agree that looks very good - but it also looks wrong as the horse is essentially flat with no relief.

    It is definitely better than the ones that have been polished to nothing though.


     
  13. Fpayntr

    Fpayntr Karting Silver Subscribed

    Joined:
    Sep 14, 2008
    Messages:
    144
    Tom can't get a better endorsement than MB
     

Share This Page