308/328 GTB/GTS / DINO GT4 PARTS CROSS REF. THREAD

Just wanted to let everyone know that I have been going through this thread and compiled an alphabetical list of the parts mentioned here and put them into a viewable or downloadable PDF on my site. I plan on doing this for some of the other models that threads have been contributed to here on Ferrari Chat. I'll try combing through them on a regular basis so I can keep these lists as up to date as possible. Hope this helps some of you guys!

http://www.ferraridiy.com/parts_guides/308-328/

 

Sorry everyone, just realized the PDF was not set to be "executable" from my hosting account. All has been changed and the PDF should open up and be downloadable now. Again, hope this is something helpful for you all.

 

Help... Looking for a OEM O2 sensor for a 1985 308 QV US car. Anyone knows where I can get one without grabbing my ankles for it?

Rob

 

1/2" ID - PN 28439
5/8" ID - PN 28447

Plan on picking up some extra 5/8" hose to extend the hose from the radiator pipes to the hose tee to address the below Service Bulletin.
Image Unavailable, Please Login

 

Dr.

Have you or anyone had any luck tracking down 1-3/8" i.d. fuel hose to replace those two 4" long rubber hoses connecting the crossover tube to the saddle tanks? I don't want to pay $40 each for OEM's if I can help it. Most hose I've found is only rated for "filler neck" not 24-7 submersion in gasoline (so say the mfg.'s).

Bob

 

Any mention in this thread is now quite old so here's both current 2012 US and European posts

http://ferrarichat.com/forum/showpost.php?p=141608000&postcount=4

http://ferrarichat.com/forum/showpost.php?p=141613788&postcount=434 - 348 use same ref

 

If memory serves it is the same as a 1989 Saab 16V Turbo. Try that Bosch part number and see what you come up with.

 

Fuel Pump Check Valve for late 308QV and the 328

One cross reference part number is E3030-27424 and is available at http://www.importeccatalog.com/

Other cross reference numbers courtesy of Steve Magnusson:

Ferrari PN =120098

Bosch PN = 1587010532

Other = W0133-1627491

Available at AutoHausAz or www.rockauto.com

 

I thought I posted on this before, but can't find it.

My coil wire caps(aka nipples aka terminal nipples) were falling apart.
Found at Car Quest EC TN7 .25 each.
aka CarQuest=Blue Streak = Standard Wires
They are black.

 

Ferrari 308 Oil pressure switch cross-reference:
M12x1.5 Thread: 1989 Saab 900 Turbo
M14x1.5 Thread: 1983 BMW 528e
-----------------------------------------------------
From: http://www.ferrarichat.com/forum/showthread.php?t=390075

 

(Couldn't edit to add)

Ferrari Part number 110664

 

I was really irritatied to see that Ricambia wanted $11.25 for a single 4.00mm Valve shim. I have since found out that the mid 1970's Fiats used the same valve shim as the 308 2 Valve cars. Fiat owned Ferrari at that point and the 33mm diameter valve shims used in the 308 cars are the same as the 1975 Fiat 128. I ordered all of my Valve shims from either International Auto Parts in Charlottesville, Virginia or Midwest-Bayless Italian Auto in Columbus, Ohio. Both have web sites that are very easy to use. I paid $2.15 per shim at IAP vice $11 at Ricambia.

 

I know this has been mentioned in a few discussions but I didn't see it included in this thread. These are available from Mouser Electronics for $6.36 each at the time of this posting.

http://www.mouser.com/Search/Refine.aspx?Keyword=Anderson+PowerPole+PP120

 

new Powerpole connectors from Mouser.
Image Unavailable, Please Login

 

I searched FC and couldn't find this, so I hope this is new and helpful information:
For the 308 GTS (carb for sure, not sure for injected and QV) the interior map light, or dome light, is the same Hella unit as similar period Mercedes Benz. Paul

Look for Mercedes Benz part number: 0008206301
Image Unavailable, Please Login

 

MR2 Mike,

Regarding the K&N Air filter 33-2518: I tried this filter on my '87 and I could force it in but, it was not an exact fit (a little to long and narrow). I tried the K&N 33-2662 and found that it is a perfect fit.

 

one of my tenax pull-snaps was broken from the trunk on the latch covers
Found them at http://www.eagleday.com/tefage.html.
They are the exact replacements. GHE Made in Germany

Dont forget to buy the little tool to make life easier.
They simply unscrew & are a quick fix.

 

Thanks Clyde! I ordered 4 for my trunk as two of mine had lost the threaded retaining nut. At $5 each, those are cheap enough to go all new and have them all shiny!

 

Is there a specific wording for the rear shocks on trunk lid? I thought it would be here but i can't seem to find it.

 

gas lift supports for rear engine cover

stabilus sg237001
strongarm 6271

 

Gas struts can almost always be repaired; 99% of the time they just need re-gassing. Don't throw those OEM Ferrari logo stamped ones away if you can get a repair done. A shop wanting to sell new stuff to you may tell you otherwise but don't believe them.

 

Hey, thanks!

 

My 308 from Europe
Image Unavailable, Please Login
Image Unavailable, Please Login
Image Unavailable, Please Login

 

47407 has a wood front bumper!!! carreapper is this not rare,,,?? what a 308xpert U R,,,so fab I have the only 308erQV with a wood front bumper!! Does CR sell gold bars?