458 Spider glass engine cover from Capristo | Page 2 | FerrariChat

458 Spider glass engine cover from Capristo

Discussion in '458 Italia/488/F8' started by Russell996, Sep 12, 2012.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. KINGMONKEY

    KINGMONKEY Formula 3

    Joined:
    Aug 16, 2008
    Messages:
    1,194
    Location:
    San Diego / Roma
    Full Name:
    J K
    Don't worry they may come out with a factory window on the spider instead we will talk about how good it looks.I sure hope not But it would be nice
     
  2. 2k7997tt

    2k7997tt Formula Junior

    Joined:
    Oct 23, 2007
    Messages:
    768
    Location:
    Westlake Village, CA
    Full Name:
    John M.
    The 458 Spider will be a classic. The 458 Spider with an aftermarket peephole installed will be less of a classic.
     
  3. sindo308qv

    sindo308qv F1 Rookie

    Joined:
    Nov 1, 2003
    Messages:
    3,575
    Location:
    miami.fl.
    Full Name:
    sindo
    Yea, not feeling it either. It's almost like the Corvette ZR1 with the hood see through of a plastic cover, what's the point.
     
  4. Noblesse Oblige

    Noblesse Oblige F1 Veteran

    Joined:
    Nov 7, 2011
    Messages:
    6,114
    Location:
    Three Places
    Isn't it interesting how few aftermarket FCar body modifications actually improve the car, and many make it worse. Is there a lesson here?
     
  5. 2k7997tt

    2k7997tt Formula Junior

    Joined:
    Oct 23, 2007
    Messages:
    768
    Location:
    Westlake Village, CA
    Full Name:
    John M.
    I think there is a lesson to be learned. Ferrari has perfected the design. They have left nothing on the table.

    Similarly, Ferrari has left little room for aftermarket companies to boost performance in the 458.
     
  6. PhilNotHill

    PhilNotHill Two Time F1 World Champ Owner

    Joined:
    Jul 3, 2006
    Messages:
    27,855
    Location:
    Aspen CO 81611
    Full Name:
    FelipeNotMassa
    Nobody can see the engine whilst you are driving. so this is just an option for when you are parked.

    Options:
    Open the bonnet so people can see the engine. or
    Take a picture of the engine and place it on the dash for all to see.
    Buy an Italia. A 360 spider or an F430 spider or a 16M. :cool:
     
  7. not4one

    not4one Formula Junior

    Joined:
    May 23, 2010
    Messages:
    887
    Location:
    CT, FL
    Just awful.
     
  8. forgeahead

    forgeahead F1 Rookie Owner

    Joined:
    Sep 16, 2008
    Messages:
    4,408
    Location:
    Rocky Mount, NC
    Full Name:
    Ray
    The crinkle red valve covers are the most visually appealing part of the engine, IMO. The plastic parts covering the oil fill is not very interesting. I would not get this.
     
  9. Lesia44

    Lesia44 F1 World Champ Silver Subscribed

    Joined:
    Aug 5, 2009
    Messages:
    17,894
    Ha, I'd never thought of it as a very English expression, but now you mention it, you're right, it is. :)
     
  10. Noblesse Oblige

    Noblesse Oblige F1 Veteran

    Joined:
    Nov 7, 2011
    Messages:
    6,114
    Location:
    Three Places
  11. Capristo Exhaust

    Capristo Exhaust Karting

    Joined:
    Dec 20, 2007
    Messages:
    152
    Location:
    Sundern/Germany
    Hello to all of you,
    Hello Lesia,
    we will discuss this matter at the end of 2013. What do you believe, how many manufacturers will design such a bonnet in addition to Capristo? There is nothing more
    that I can reveal at the moment, but some more details I am willing to let you know.


    The bonnet will be designed to come with a glass screen. Of course you cannot see the engine because the engine is arranged too far to the front. What one can see is a small
    part of the intake manifolds, air flow meter, oil level gauge and carbon air box. We are facing the problem that
    directly below the screen there is the lock arranged. Consequently we made a traverse from carbon fibre. Below this traverse the lock is hidden and above there is the Ferrari
    lettering. As a consequence the Ferrari logo will not be located any more on the lacquered
    engine bonnet but on the carbon traverse under the screen.

    I am of the opinion that it looks much more technically when there are some carbon fibre parts under the screen and it will look very nice.

    But basically our target was quite a different one. The F458 Spider is a wonderful car. but when you have a look at it directly from behind, the car seems to be too monotone. Too
    much lacquered area and too less contrast.

    Our target was to change this area to make it less monotonous. We also considered the
    technical aspects. The air intakes were designed a little bit higher to ensure that the airbox gets some more air.

    Furthermore, taking into consideration that the F458 gets very hot at its rear part, we
    wanted to drain the heat in a more advantageous way. So we have considered bigger
    air outlets and instead of 3 of them per side we made 4 per side.

    To realize this bonnet we have built tools made from steel to ensure that all the parts that
    are manufactured are also 100% identical. These bonnets we will have lacquered in Maranello and supply in a completely lacquered condition to enable the customer just to
    mount them.

    This bonnet must be ordered directly with us and we are searching for distributors to the
    USA.

    If this should arise the interest of someone, please contact us in Germany because the
    company Taurino is responsible for selling exhaust systems only. All the other parts like the bonnet, remote control kits, service parts, ..etc. can be ordered directly with us in Germany.

    Antonio
    Image Unavailable, Please Login
    Image Unavailable, Please Login
    View attachment Bilder Dokumentation Motor Haube -Capristo.pdf
     
    Last edited by a moderator: Sep 7, 2017
  12. KINGMONKEY

    KINGMONKEY Formula 3

    Joined:
    Aug 16, 2008
    Messages:
    1,194
    Location:
    San Diego / Roma
    Full Name:
    J K
    Antonio
    Thanks for that info.Do you have a idea of the cost?
     
  13. Lesia44

    Lesia44 F1 World Champ Silver Subscribed

    Joined:
    Aug 5, 2009
    Messages:
    17,894
    That's only partially right. Used in that context it is a milder form of 'fück' rather than a direct replacement. But these days it is more commonly used to say something is a bit rubbish in a cheesy or tasteless way.

    Capristo, I like the idea of CF just under the glass - would indeed look technical. And very 'trick' to have the Ferrari logo below the glass. I do think you're wrong, though, in your take on the rear deck as it stands now. I think it is a work of genius and a perfect alternative to the glass on the Italia - it perfectly references elements found in Ferrari's back catalogue while feeling thoroughly modern and appropriate to the rest of the spider's design. I have no doubt, though, that there will be enough people who disagree with me to make a glass cover a nice little earner.
     
  14. Capristo Exhaust

    Capristo Exhaust Karting

    Joined:
    Dec 20, 2007
    Messages:
    152
    Location:
    Sundern/Germany
    Lesia, io sono Antonio,
    I have. one 458 Italia coupe, I ordered the Spider because I wanted to make this change

    it's a nice car ... no .... is wonderful ..... wonderful ... no no no I can not describe this work of art.

    but the back is too much red paint ... please do not say I want to order in a different color.


    I think many people do not like, but also a lot to like it. I think in 6 weeks will be ready, then there are a few photo.

    I want to deliver the hood with the original color.
    I do not know how much does it cost, I do not know how much does it cost to paint.

    I think with glass and paint about $ 7500

    ciao Antonio C.
     
  15. MD355

    MD355 Formula Junior

    Joined:
    Mar 8, 2004
    Messages:
    802
    Location:
    Athens, Greece
    Full Name:
    MD
    +1 Ferrari will want to sell it as an option...
     
  16. KINGMONKEY

    KINGMONKEY Formula 3

    Joined:
    Aug 16, 2008
    Messages:
    1,194
    Location:
    San Diego / Roma
    Full Name:
    J K
    Antonio
    Sono interessato anche che è un bullone diretto?

    Jeff
     
  17. Capristo Exhaust

    Capristo Exhaust Karting

    Joined:
    Dec 20, 2007
    Messages:
    152
    Location:
    Sundern/Germany
    Jeff...cosa scrivi??????hahahaah Jeff .. you write so Italian, as I write english ..... I can not understand anything
     
    Shahaf likes this.
  18. KINGMONKEY

    KINGMONKEY Formula 3

    Joined:
    Aug 16, 2008
    Messages:
    1,194
    Location:
    San Diego / Roma
    Full Name:
    J K
    Does it directly bolt on?.Is there a panel there that can be removed on the OEM lid? Can a local shop do the work?
     
  19. Capristo Exhaust

    Capristo Exhaust Karting

    Joined:
    Dec 20, 2007
    Messages:
    152
    Location:
    Sundern/Germany
    all attachment points remain original, no modifications, you can do it yourself.

    Antonio
     
  20. Russell996

    Russell996 Formula 3

    Joined:
    Sep 24, 2010
    Messages:
    2,263
    Location:
    New Forest UK
    Full Name:
    Russell
    Last edited by a moderator: Sep 7, 2017
  21. Webber45

    Webber45 Karting

    Joined:
    Oct 2, 2011
    Messages:
    217
    Location:
    Bavaria / Germany
    Wow, I really like it!

    Cant wait to see it live. What the price will be?

    Ciao - Webber45
     
  22. Traveller

    Traveller F1 Veteran

    Joined:
    Apr 10, 2009
    Messages:
    6,323
    Location:
    UK
    Full Name:
    Tim
    Ruins a beautiful rear end design. whoevere wabts to see an oil cap and an airbox? If it showed the engine, different.
     
  23. Lesia44

    Lesia44 F1 World Champ Silver Subscribed

    Joined:
    Aug 5, 2009
    Messages:
    17,894
    Yep, just breaks up the nice lines and makes the back end too busy.
     
  24. 2GT

    2GT Formula 3

    Joined:
    Aug 25, 2008
    Messages:
    1,842
    Location:
    Western NY
    Full Name:
    Fred
    In the picture posted above it looks like something off a vending machine. Ferrari chose not to attempt an engine lid window, I imagine because of the presence of the retracted roof underneath. In this case, I think that they should have left well enough alone. Fred
     
  25. KINGMONKEY

    KINGMONKEY Formula 3

    Joined:
    Aug 16, 2008
    Messages:
    1,194
    Location:
    San Diego / Roma
    Full Name:
    J K
    It looks cool
     

Share This Page