360 ECU Reset Procedures | FerrariChat

360 ECU Reset Procedures

Discussion in '360/430' started by rob4092xx, Oct 31, 2012.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. rob4092xx

    rob4092xx Formula Junior

    Joined:
    Mar 8, 2010
    Messages:
    570
    Location:
    Phoenix, AZ
    Last edited by a moderator: Sep 7, 2017
    rob4092xx, Oct 31, 2012
    #1
  2. DrDon

    DrDon F1 Rookie BANNED

    Joined:
    Jul 11, 2012
    Messages:
    3,627
    Location:
    Infractionville
    Full Name:
    Armando Decredenza
    Thanks for posting - will be most helpful to all I'm sure.

    Don
     
    DrDon, Oct 31, 2012
    #2
  3. rob4092xx

    rob4092xx Formula Junior

    Joined:
    Mar 8, 2010
    Messages:
    570
    Location:
    Phoenix, AZ
    Grey Boxer just pointed something out to me in another Thread I posted today.

    http://www.ferrarichat.com/forum/showthread.php?p=141861298&posted=1#post141861298

    I want to make sure everyone knows this information came from a company I purchased some Ferrari parts from. They did not ask me not to provide it to anyone else, nor did they ask that I not forward it to other Ferrari owners.

    I was just forwarding this information to help other FChat members. This seemed to chap Grey Boxer since I did not post a disclaimer on it...so here it is!

    I will do better in the future and not post useful information I may come across!
     
    rob4092xx, Oct 31, 2012
    #3
  4. 360Spider_Justin

    360Spider_Justin Rookie

    Joined:
    Aug 29, 2014
    Messages:
    35
    Location:
    Atlanta, Georgia
    Full Name:
    Justin
    My engine light came on. I think it was from filling fuel.

    Has anyone used this procedure and it worked? Regarding the SD2,SD3? What do those mean. How do you check the readiness codes for the final step?

    Help please! I need to pass emissions and I can't with the CEL on

    Justin.
     
    360Spider_Justin, Aug 30, 2014
    #4
  5. Ingenere

    Ingenere F1 Veteran Owner Silver Subscribed

    Joined:
    Dec 11, 2001
    Messages:
    6,449
    Location:
    On the Limit
    Full Name:
    Dino
    You can buy a code reader at most auto parts stores that will allow you to read the code. You can then correct the problem, and/or erase the code.
     
    Ingenere, Aug 30, 2014
    #5
  6. bikz

    bikz Formula 3

    Joined:
    Mar 2, 2012
    Messages:
    1,043
    Location:
    Malaysia

    thanks mate......
    anyway what is a "readiness code"?
    are they the usual CEL codes ?
     
    bikz, Aug 30, 2014
    #6

Share This Page