Air Temp Sensor??? | FerrariChat

Air Temp Sensor???

Discussion in 'LamborghiniChat.com' started by the Wizard, Nov 19, 2012.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. the Wizard

    the Wizard Karting

    Joined:
    Feb 5, 2008
    Messages:
    64
    Location:
    Agoura Hills, CA
    Full Name:
    Ross IV
    Hey guys,

    My 99 SV threw a code for the intake air temp sensor. I switched the right and left sensors, and the code switched sides. I think I was told a while back that this particular sensor is rare and expensive ($300). Seems strange cause its such a simple sensor?

    Anyway I noticed this one on eBay, that says is for a 98 Diablo. Is the 98 air temp sensor the same as the 99?

    http://www.ebay.com/itm/AIRTEX-5S1054-Air-...p=mtr#vi-ilComp

    Anyone know anything about it? The store selling it knew nothing, and even when I called the manufacturer they said they actually buy this one and only know it fits some Kias?

    Ross
     
    Last edited: Nov 19, 2012
  2. exwpart

    exwpart Rookie

    Joined:
    Oct 9, 2011
    Messages:
    11
    Last edited by a moderator: Sep 7, 2017
  3. the Wizard

    the Wizard Karting

    Joined:
    Feb 5, 2008
    Messages:
    64
    Location:
    Agoura Hills, CA
    Full Name:
    Ross IV
  4. jollygood

    jollygood Formula 3

    Joined:
    Oct 24, 2005
    Messages:
    1,096
    Full Name:
    jollygood
  5. gday

    gday Formula 3

    Joined:
    Sep 10, 2004
    Messages:
    1,086
    Location:
    CA, USA - NSW, AUS
    Full Name:
    Mick
    Not 100% certain but I think the same part is used on all Diablos and many Murci's.

    -mick
     
  6. the Wizard

    the Wizard Karting

    Joined:
    Feb 5, 2008
    Messages:
    64
    Location:
    Agoura Hills, CA
    Full Name:
    Ross IV
    Is this part commonly available? Guess I could make a call, but anyone know?
     
  7. gday

    gday Formula 3

    Joined:
    Sep 10, 2004
    Messages:
    1,086
    Location:
    CA, USA - NSW, AUS
    Full Name:
    Mick
    Yes.

    -mick
     
  8. the Wizard

    the Wizard Karting

    Joined:
    Feb 5, 2008
    Messages:
    64
    Location:
    Agoura Hills, CA
    Full Name:
    Ross IV
    You know approximately how much?
     
  9. gday

    gday Formula 3

    Joined:
    Sep 10, 2004
    Messages:
    1,086
    Location:
    CA, USA - NSW, AUS
    Full Name:
    Mick
    Somewhere in between $200 and $300.

    -mick
     
  10. James_Woods

    James_Woods F1 World Champ

    Joined:
    May 17, 2006
    Messages:
    12,755
    Location:
    Dallas, Tx.
    Full Name:
    James K. Woods
    Three hundred dollars does not sound all that expensive, given todays times and market.
     
  11. jollygood

    jollygood Formula 3

    Joined:
    Oct 24, 2005
    Messages:
    1,096
    Full Name:
    jollygood

    Are you fkin kiddin'? The one on eBay is $22.08.
     
  12. the Wizard

    the Wizard Karting

    Joined:
    Feb 5, 2008
    Messages:
    64
    Location:
    Agoura Hills, CA
    Full Name:
    Ross IV
    And all this is is a tiny variable resistance temp sensor, tiny in size, and probably on every other car......
     
  13. gday

    gday Formula 3

    Joined:
    Sep 10, 2004
    Messages:
    1,086
    Location:
    CA, USA - NSW, AUS
    Full Name:
    Mick
    In a generic sense that's true but getting one with the correct profile would take a bunch of research.

    -mick
     
  14. jollygood

    jollygood Formula 3

    Joined:
    Oct 24, 2005
    Messages:
    1,096
    Full Name:
    jollygood



    Why not just buy the one on eBay and compare resistance vs the other you have?
     
  15. James_Woods

    James_Woods F1 World Champ

    Joined:
    May 17, 2006
    Messages:
    12,755
    Location:
    Dallas, Tx.
    Full Name:
    James K. Woods
    Maybe L owners have a different attitude than F owners.

    But yes, it was posted in jest...
     
  16. gday

    gday Formula 3

    Joined:
    Sep 10, 2004
    Messages:
    1,086
    Location:
    CA, USA - NSW, AUS
    Full Name:
    Mick
    You will need to know the full R vs. T curve i.e. the resistance cold, the resistance hot and then is the change linear, logarithmic etc.

    -mick
     
  17. jollygood

    jollygood Formula 3

    Joined:
    Oct 24, 2005
    Messages:
    1,096
    Full Name:
    jollygood
  18. gday

    gday Formula 3

    Joined:
    Sep 10, 2004
    Messages:
    1,086
    Location:
    CA, USA - NSW, AUS
    Full Name:
    Mick
    There is tons of stuff on ebay and other misc. web sites that show cross reference listing to Lamborghini parts that simply are not. Not passing judgment on this part but it would be a least caveat emptor.

    -mick
     
  19. Laust

    Laust Rookie

    Joined:
    Aug 23, 2011
    Messages:
    45
    I don’t have specific Diablo parts compatibility knowledge, but:

    The big manufacturers often put their name and part number on the sensors, so I would inspect one of the Manifold Air Temperature (MAT) sensors for inscriptions and if there Google it to find a direct replacement, circumventing the Lamborghini mark-up.

    Alternatively, just buy one with the correct connector and compare the resistance to that of the remaining good MAT sensor, for example at just 2 temperatures.

    The typical MAT (and coolant) sensors are Negative Temperature Coefficient (NTC) thermistor type sensors with resistance of about 3300 ohms @ 20C and 350 ohms @ 80C.

    The MAT sensors are there to provide small adjustments in fuel delivery and possibly also timing.

    Laust
     
  20. the Wizard

    the Wizard Karting

    Joined:
    Feb 5, 2008
    Messages:
    64
    Location:
    Agoura Hills, CA
    Full Name:
    Ross IV
    Last,

    I went ahead and ordered one....figured for $20 it'll be a good experiment. I'll do as you say and report back.....
     
  21. deon.smith

    deon.smith Formula Junior

    Joined:
    Jan 23, 2009
    Messages:
    548
    Location:
    Oklahoma
    I believe you might need 7M919529A.
     
  22. gday

    gday Formula 3

    Joined:
    Sep 10, 2004
    Messages:
    1,086
    Location:
    CA, USA - NSW, AUS
    Full Name:
    Mick
    Thats the manifold absolute pressure sensor.

    -mick
     
  23. deon.smith

    deon.smith Formula Junior

    Joined:
    Jan 23, 2009
    Messages:
    548
    Location:
    Oklahoma
    You are correct. My mistake. 07M919529 will fit:

    Diablo (1991)
    Diablo 6.0 (2001)
    Diablo GT (1999)
    Diablo Roadster (1998)
    Diablo SE30 (1995)
    Diablo SV (1997)
    Diablo SV (1998)
    Diablo SV (1999)
    Murcielago (2003)
    Murcielago Coupe update
    Murcielago Roadster
    Murcielago Roadster update
     

Share This Page