Fabspeed F430 Headers | Page 2 | FerrariChat

Fabspeed F430 Headers

Discussion in '360/430' started by Fabspeed Motorsport, Jun 24, 2011.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

Page 2 of 2
  1. Fabspeed Motorsport

    Fabspeed Motorsport F1 Rookie Sponsor

    Joined:
    Feb 5, 2009
    Messages:
    3,140
    Location:
    Fort Washington, PA
    Full Name:
    John S
    Hi Robert,

    By removing the precats and switching to high flow cats could result in a CEL. Not everyone gets the CEL, but it is a possibility. Adding our 90 degree o2 sensor spacers should help keep the light off. We can assure that the CEL will stay off with our ECU upgrade. Please let me know if you have any questions. Thanks.

    Jeff
     
    Fabspeed Motorsport, Nov 8, 2012
    #26
  2. dmark1

    dmark1 F1 World Champ BANNED Owner

    Joined:
    Feb 26, 2008
    Messages:
    11,439
    Location:
    Americas Team Headquarters
    Full Name:
    Mark
    Question: If I order these will my Ferrari dealer install them or will I have to have another shop like Norwood Performance do it? What is the feeling among the dealers about doing this? Does it affect resale/trade value of the car? What is an average installation cost for doing this?

    Thanks
     
    dmark1, Nov 8, 2012
    #27
  3. Fabspeed Motorsport

    Fabspeed Motorsport F1 Rookie Sponsor

    Joined:
    Feb 5, 2009
    Messages:
    3,140
    Location:
    Fort Washington, PA
    Full Name:
    John S
    Your dealer may be willing to install a non-OEM part. Some do, some don't. However, I have shop suggestion in the Dallas area if you need one. Shoot me a PM, email or give me a call to discuss further. Thanks!

    Jeff
     
    Fabspeed Motorsport, Nov 8, 2012
    #28
  4. RichardCH

    RichardCH F1 Rookie BANNED

    Joined:
    Jan 16, 2005
    Messages:
    4,661
    Strange that Capristo Cats don't generate a CEL but Fabspeed ones do & the Fabspeed 90 degree spacer is not the best design as you can only install or deinstall it when the Cats are off the car
     
    RichardCH, Nov 8, 2012
    #29
  5. rmani

    rmani F1 Veteran Owner Silver Subscribed

    Joined:
    Nov 1, 2003
    Messages:
    7,334
    Location:
    NJ
    Full Name:
    RMani
    isn't driftracer3 the scam artist that was prowling these boards a while ago?
     
    rmani, Nov 8, 2012
    #30
  6. HighandDry

    HighandDry Formula Junior

    Joined:
    Jul 24, 2012
    Messages:
    447
    Location:
    Seattle
    Full Name:
    Steve
    If someone is worried about CEL, you shouldn't do both Fabspeed headers and cats. I have both and have the CEL.

    Tried the spacers- CEL less, but eventually it turned on
    Tried the tune- Just turned off the monitors and ran as open loop, so still no passing of emissions.
     
    HighandDry, Nov 9, 2012
    #31
  7. Rpalomo

    Rpalomo Rookie

    Joined:
    Oct 8, 2012
    Messages:
    40
    Location:
    CA
    Full Name:
    Robert Palomo
    Last edited by a moderator: Sep 7, 2017
    Rpalomo, Nov 24, 2012
    #32
  8. Rpalomo

    Rpalomo Rookie

    Joined:
    Oct 8, 2012
    Messages:
    40
    Location:
    CA
    Full Name:
    Robert Palomo
    Last edited by a moderator: Sep 7, 2017
    Rpalomo, Nov 24, 2012
    #33
  9. Rpalomo

    Rpalomo Rookie

    Joined:
    Oct 8, 2012
    Messages:
    40
    Location:
    CA
    Full Name:
    Robert Palomo
    Rpalomo, Nov 24, 2012
    #34
  10. Fabspeed Motorsport

    Fabspeed Motorsport F1 Rookie Sponsor

    Joined:
    Feb 5, 2009
    Messages:
    3,140
    Location:
    Fort Washington, PA
    Full Name:
    John S
    Fabspeed Motorsport, Nov 26, 2012
    #35
  11. Rpalomo

    Rpalomo Rookie

    Joined:
    Oct 8, 2012
    Messages:
    40
    Location:
    CA
    Full Name:
    Robert Palomo
    Grand auto works tech told me he took out the bypass valve and that's all he did and of course the fabspeed headers. But no cel at all so far and it definitley feels and sounds much better.
     
    Rpalomo, Nov 26, 2012
    #36
Page 2 of 2

Share This Page