HELP!!!! NEED EXPERT ADVICE on 355 F1 Unit!!! | FerrariChat

HELP!!!! NEED EXPERT ADVICE on 355 F1 Unit!!!

Discussion in 'Technical Q&A' started by TTG, Apr 23, 2013.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. TTG

    TTG Formula 3

    Jun 11, 2002
    1,555
    East Hanover, NJ
    Full Name:
    Todd Gieger
    Hi Guys,
    I have a 1999 F355 F1 Series Fiorano, #86. My car is currently at the dealer for a transmission light that comes on intermittently. They have done very extensive diagnosis without trying to sell me a F1 kit. Unfortunately it turns out that I might need one. The dealer is telling me my F1 pump runs constantly because the hydraulic pressure is not being held in the accumulator. Do any of you guys know where I can have mine rebuilt or possibly buy a rebuilt one?

    Thanks,

    Todd
     
  2. phrogs

    phrogs F1 Veteran
    Silver Subscribed

    Apr 13, 2004
    7,346
    Kzoo Michigan
    why not jump over to the 355 section.
     
  3. 360Grigio

    360Grigio Karting

    Nov 1, 2010
    150
    Full Name:
    Steve
    Check out this thread by Mark - FChat name Windsock - replacing the 355 F1 pump with a F1 pump from a 360. Hope this helps

    http://www.ferrarichat.com/forum/348-355/302088-360-f1-pump-install-355-a.html
     
  4. BigTex

    BigTex Seven Time F1 World Champ
    Owner Rossa Subscribed

    Dec 6, 2002
    79,386
    Houston, Texas
    Full Name:
    Bubba
    I think the pump part # is superseeded now across several models???

    The later design is better, I have read.

    One was JUST offered on FerrariAds for $500, New In Box and it was snatched up in about five minutes...I thought of this thread but it sold faster than I could come in here and type!

    Sorry..
     
  5. Ricambi America

    Ricambi America F1 World Champ
    Sponsor Owner

    #5 Ricambi America, Apr 25, 2013
    Last edited by a moderator: Sep 7, 2017
  6. 335s

    335s Formula Junior

    Jan 17, 2007
    870
    SF Bay Area
    Full Name:
    T. Monma
    are these nitrogen charge bladder cells?
    if so, and have a single hydraulic port-why are they more than 75.00?

    Seriously...
    what is pressure range of hydraulic/brake fluid(either one is usually used, pentosin occassionally)circuit?

    this HAS to be cross referenceable to a cheaper cost level????
     
  7. TTG

    TTG Formula 3

    Jun 11, 2002
    1,555
    East Hanover, NJ
    Full Name:
    Todd Gieger

Share This Page