Red Bull helicopter doing back flips | FerrariChat
Buy

Red Bull helicopter doing back flips

Discussion in 'Aviation Chat' started by Roadney, May 15, 2013.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. Roadney

    Roadney Karting

    Jun 3, 2009
    151
    SFL - Broward County
    #1 Roadney, May 15, 2013
    Raw footage shows a Red Bull helicopter sporting some of its tricks above San Diego’s Bay Tuesday evening.

    News Distribution Network - Shared Video

    According to Red Bull, “Malibu” Chuck Aaron is the only helicopter pilot licensed to perform such aerobatic tricks in the U.S., making him one of only three internationally. He is also the first helicopter pilot to receive the Art Scholl Showmanship Award.

    “I love doing things nobody has ever done, as well as the opportunities the Red Bull Helicopter offers me,” Aaron, who has been flying with Red Bull since 2004, said according to the site.
     
  2. kylec

    kylec F1 Rookie
    Silver Subscribed

    Jun 9, 2005
    3,670
    Orlando
    #2 kylec, May 15, 2013
    I've seen him in person over Miami during a flugtag. It's very counter intuitive to an aviation enthusiest.
     
  3. Tcar

    Tcar F1 Rookie

    Jan 2, 2010
    4,739
    Denver, Albuquerque
    #3 Tcar, May 15, 2013
    That's a BO-105.

    It has hingleless, rigid rotor blades.

    Does that contribute to it's ability to perform like that?
     
  4. donv

    donv Two Time F1 World Champ
    Owner Rossa Subscribed

    Jan 5, 2002
    26,107
    Portland, Oregon
    Full Name:
    Don
    #4 donv, May 15, 2013
    Yes. If you look on the internet, you can find a fair number of BO-105 aerobatic videos.

    Don't try that in most other helicopters!

     
  5. KKSBA

    KKSBA F1 World Champ
    Rossa Subscribed

    Oct 31, 2003
    15,299
    SBarbara-La Jolla CA
    Full Name:
    KKSBA
    #5 KKSBA, May 16, 2013
    I've flown the Bokal BO-105. It has a mast bending gauge (green-yellow-red) since it is rigid the blades and mast take the load by flexing, and yes because of the rigid rotor you can do those tricks.

    I never did any of that though. 15 hours or so of routine ops.
     
  6. BeachBum

    BeachBum Formula 3

    Dec 9, 2003
    2,058
    The Beach of Course
    #6 BeachBum, May 21, 2013
    Very interesting, When Chuck and Mike Graham were building a Cobra from parts at the Camarillo airport they offered me a job as a mech. I was working for myself at the time doing something else so I took a pass on the offer. I had no idea Chuck was such a famous guy. They ended up selling it to Red Bull.
     

Share This Page