Key for F355 | FerrariChat

Key for F355

Discussion in '348/355' started by FX8200, May 22, 2013.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. FX8200

    FX8200 Karting

    Joined:
    Apr 7, 2013
    Messages:
    172
    Hi all, I am new here, wondering where I can order a blank uncut key for my f355. Is it also true the 360 key fits?

    Thanks in advance

    FX
     
    FX8200, May 22, 2013
    #1
  2. apex97

    apex97 Formula Junior Owner

    Joined:
    Nov 25, 2006
    Messages:
    593
    Location:
    Stockbridge, GA
    Full Name:
    Edward Zabinski
    Look on eBay there are tons of them....not sure about the 360 key being the same though.

    I got one of the cool red "enzo" fobs for about $200..excessive but cool. Ace hardware cut it for me for $2.
     
    apex97, May 22, 2013
    #2
  3. treedee3d

    treedee3d F1 Rookie

    Joined:
    Apr 1, 2011
    Messages:
    3,726
    Location:
    Montreal
    Full Name:
    Fab
    ricambiamerica.com

    I bought 2 of the square ones (11$ each)
     
    treedee3d, May 22, 2013
    #3
  4. Extreme

    Extreme F1 Rookie

    Joined:
    May 26, 2010
    Messages:
    2,515
    Location:
    Northern Utah
    Full Name:
    Erick
    Yes the 360 fits the 355.
     
    Extreme, May 22, 2013
    #4
  5. plugzit

    plugzit F1 Veteran Silver Subscribed

    Joined:
    Dec 1, 2004
    Messages:
    7,782
    Location:
    Redondo Beach, CA
    Full Name:
    Bruce Bogart
    Get a GothKey from Ricambi!!! Coolest of all.
     
    plugzit, May 22, 2013
    #5
  6. Ricambi America

    Ricambi America F1 World Champ Sponsor Owner

    Joined:
    Dec 7, 2003
    Messages:
    16,453
    Location:
    Winston Salem, NC
    Last edited by a moderator: Sep 7, 2017
    Ricambi America, May 22, 2013
    #6
  7. 308 GTB

    308 GTB F1 World Champ Rossa Subscribed

    Joined:
    Feb 7, 2002
    Messages:
    11,729
    Location:
    New Jersey
    Full Name:
    Barry Wolinsky
    308 GTB, May 22, 2013
    #7
  8. roadracer311

    roadracer311 Formula 3

    Joined:
    May 6, 2009
    Messages:
    2,398
    Location:
    San Francisco
    Full Name:
    Paul
    I bought a generic Fiat key, had it cut to match my 355 key, and then stuffed it into one of the Enzo Keys you can get from the FerrariStore. A bit of a project.
    Image Unavailable, Please Login
     
    Last edited by a moderator: Sep 7, 2017
    roadracer311, May 23, 2013
    #8
  9. greyboxer

    greyboxer F1 World Champ

    Joined:
    Dec 8, 2004
    Messages:
    12,671
    Location:
    South East
    Full Name:
    Jimmie
    You're in HK so just try any good car locksmith - it'll be easier if you take a note of the name / type of blank from one of the Ebay adverts eg FT46 so they can cross reference
     
    greyboxer, May 23, 2013
    #9
  10. WATSON

    WATSON Two Time F1 World Champ Owner Rossa Subscribed

    Joined:
    Sep 9, 2010
    Messages:
    23,711
    Location:
    WI
    That looks great. Do you recall what Fiat key blank you used?
     
    WATSON, May 23, 2013
    #10
  11. GTO Joe

    GTO Joe Formula 3 Silver Subscribed

    Joined:
    Feb 15, 2013
    Messages:
    1,002
    Location:
    Charlotte, NC
    Full Name:
    Joseph Troutwine
    Fiat key blank for 348 is FT46 which I think is the same for 355. Good old ACE Hdw. had it in stock.
     
    GTO Joe, May 23, 2013
    #11
  12. roadracer311

    roadracer311 Formula 3

    Joined:
    May 6, 2009
    Messages:
    2,398
    Location:
    San Francisco
    Full Name:
    Paul
    I'm glad Joe remembered. I knew the blank number at the time.

    I did have to dremel the top of the Fiat key into the correct shape to fit into the Enzo key. Which was the hard part.
     
    roadracer311, May 23, 2013
    #12
  13. GeorgeG

    GeorgeG Karting

    Joined:
    Oct 3, 2012
    Messages:
    50
    Location:
    Dublin, ohio
    Full Name:
    George Gianakopoulos
    I only had one key/fob and no PIN when i bought. Wanted a back up key/ fob. Gobble just made me a new fob. Now I need a key. Was going to buy one from Ferrari ($275) but now you are telling me buy the blank from Ricambi and take it and my old key to Ace hardware. Two dollars later I have my second key?

    Question #2. I've thrown this out their before. Obviously one would like to have the PIN to their car but how important is it?
     
    GeorgeG, May 23, 2013
    #13
  14. Pengster355

    Pengster355 Formula Junior

    Joined:
    Mar 9, 2006
    Messages:
    269
    Location:
    Singapore
    Can you explain a bit more on the stuffing bit into the Enzo key please?

    Thanks
    P.
     
    Pengster355, May 23, 2013
    #14
  15. Dave rocks

    Dave rocks F1 World Champ BANNED

    Joined:
    Nov 23, 2012
    Messages:
    16,047
    Location:
    Orchard Park, NY
    Full Name:
    Dave Lelonek
    Say you are on a trip and your fob breaks - guess, what? Without the PIN, you won't be starting your car :-(

    The PIN cost me $350 IIRC.
     
    Dave rocks, May 24, 2013
    #15

Share This Page