I am looking for new plug wires for the 355. Don't really NEED them, but I would like to refresh them just the same. Why does a short set of wires cost $500? You can get these for $400 IGN9793 Kingsborne Spark Plug Wires Ignition Wire Set - Kingsborne Ignition Spark Plug Wires Sets made in the USA A single wire from Ferrari is around $275...a wire!!.... The full set for my TR8 is $30 from Kinsborne. What makes these so darn special...and expensive?
Ferrari tax plus $100 mark up you guys pay. Still expensive but this is what they actually cost...... http://www.eurospares.co.uk/searchResult_one.asp?S=156476&TM=1&TMo=691&TA=1&TB=40960
So it truly is a Ferrari Tax thing? Not product performance / product properties thing? Are the ends proprietary? Any 7mm wire + proper ends is acceptable? Surprised that Kingsborne would pile on so hard.
Watson, got to say a quick scan through some of the aftermarket ones we can get over here you're still looking at a little under £300 for both sets to cover all 8 wires. Seems pricier than most other sets so maybe they are a bit different?
I don't know it 355 plug wires are built like 348 wires, or not. If they are, go up to the "348 DIY" sticky at the top of this page and check the 3rd entry on the 1st page. There's a link to "real cheap spark plug wires". They work perfectly and cost somewhere in the $50.00 range for the whole thing. Hope that helps.
I'm doing the plug wires on the 348 as we speak. I'm going to re use the plastic connectors on both ends. New 20ft of non resister 8mm silicon wire from evilbay, 17 dollars. New copper wire terminal ends from 1800onlineautoparts, 15 dollars. Total under 35 bucks.
Standard 8mm non resistor silicon plug wire. Beru Spark Plug Wire Connector W0133-1644186. 54 cents each.
You may find this thread interesting. Build your own made easy. http://www.ferrarichat.com/forum/348-355/239855-anatomy-348-spark-plug-wire.html
Well in that case.... Hey guys, start your own thread! You can start by going here! http://www.ferrarichat.com/forum/348-355/408227-thread-hijack-thread.html
I am reviving this thread on account of the invoices for service that I came across with a 355 for sale. Here is the invoice. Labor is not itemized but the part cost only for plugs, wires and coils total $1423. I have decided to replace this stuff on my car and am sourcing the parts. I have found the coils for a little under $100 each and looking for a source for wires. What have some used and source would be appreciated. Thank you Image Unavailable, Please Login
WATSON A friend of mine bought a set from kingsborne last year and the car just didn't run right. He then sent them back and they gave him an oem italian set for the same price.car ran great.The lady did say they where having problems with the after market US ones. For $100.00 more i would stick with the italian made
I picked up rough running. Ordered a set of Kingsborne & she ran well. The wires are molded, hence the price. But if you read the threads, you'll see Kingsborne wires for a 348 at a reasonable price and suddenly Kingborne raised the price. I did try & track down the Beru connectors. No longer made in Germany but available through an Italian company.
