308 85 qvMirror part needed please | FerrariChat
Buy

308 85 qvMirror part needed please

Discussion in '308/328' started by lb33wonka, Aug 25, 2013.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. lb33wonka

    lb33wonka Karting

    May 20, 2010
    73
    CALIFORNIA
    Full Name:
    Larry Brehm
    #1 lb33wonka, Aug 25, 2013
    Last edited by a moderator: Sep 7, 2017
  2. lb33wonka

    lb33wonka Karting

    May 20, 2010
    73
    CALIFORNIA
    Full Name:
    Larry Brehm
    #2 lb33wonka, Aug 25, 2013
    Last edited by a moderator: Sep 7, 2017
  3. kimbo 308

    kimbo 308 Formula Junior
    BANNED

    May 11, 2012
    324
    #3 kimbo 308, Aug 25, 2013
    Two options....


    Squadra nuvolari sells repo's..see their website ......or contact via PM Verell Boan,an Fchatter on here who makes quality reproductions...
     
  4. lb33wonka

    lb33wonka Karting

    May 20, 2010
    73
    CALIFORNIA
    Full Name:
    Larry Brehm
    #4 lb33wonka, Aug 25, 2013
    How do I pm them? What is my best option?
     
  5. kimbo 308

    kimbo 308 Formula Junior
    BANNED

    May 11, 2012
    324
    #5 kimbo 308, Aug 25, 2013
  6. 308 milano

    308 milano F1 Veteran

    Jan 15, 2007
    5,327
    Montana
    Full Name:
    Kim
    #6 308 milano, Aug 25, 2013
    +1 w/ Kimbo 308, I purchased two of those plastic end caps a few years ago for my GTB QV from a west coast distributor, $35 bucks each and fit like crap.
     
  7. chas-3

    chas-3 Formula 3
    Silver Subscribed

    Jan 28, 2009
    1,281
    Colorado
    Full Name:
    Chuck
    #7 chas-3, Aug 25, 2013
    Same here, horrible reproduction from the west coast place. I had to glue them in place in order to get them to stay attached. Hopefully the folks listed above make a better piece.
     
  8. lb33wonka

    lb33wonka Karting

    May 20, 2010
    73
    CALIFORNIA
    Full Name:
    Larry Brehm
    #8 lb33wonka, Aug 27, 2013
    Thank you so much
     
  9. Verell

    Verell F1 Veteran
    Consultant Owner

    May 5, 2001
    7,022
    Groton, MA
    Full Name:
    Verell Boaen
    #9 Verell, Aug 29, 2013
    Click on my name by this post & select [Send eMAIL to Verell] :)
     
  10. GrayTA

    GrayTA F1 World Champ
    Owner Rossa Subscribed

    Jun 25, 2006
    15,130
    Deep South
    Full Name:
    PDG
    #10 GrayTA, Aug 29, 2013
    Hi Verell!! Haven't seen you around in a while!!! Good to see you!!!




    PDG


    Posted from Ferrarichat.com App for Android
     
  11. Verell

    Verell F1 Veteran
    Consultant Owner

    May 5, 2001
    7,022
    Groton, MA
    Full Name:
    Verell Boaen
    #11 Verell, Aug 30, 2013
    Several people have asked about how well the mirror caps fit. Here are some tips:

    They should be a snug fit. However, Ferrari’s design doesn’t provide strong retention so I recommend using a small dab of clear or black silicone sealant on the tabs. This ensures they will only come off when you want to remove them.

    Also, if the fit is a bit too loose, the plastic can be softened by dipping in boiling water & gently spreading it out to snug up the fit.


    Hello yourself Patrick.
    I tend to lurk these days. Just don't seem to have the spare time I had when I was working full time!!!
     
  12. lb33wonka

    lb33wonka Karting

    May 20, 2010
    73
    CALIFORNIA
    Full Name:
    Larry Brehm
    #12 lb33wonka, Sep 13, 2013
    GOt my replacement and worked and looked great from Verell Boaen

    Unobtainium Supply Co.
     

Share This Page