You never know what you'll find on craigslist | FerrariChat
Buy

You never know what you'll find on craigslist

Discussion in '308/328' started by 308gtsqv, Sep 6, 2013.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

Page 1 of 2
  1. 308gtsqv

    308gtsqv Formula Junior

    Feb 12, 2008
    610
    Mass/Cape Cod
    Full Name:
    Mike
    #1 308gtsqv, Sep 6, 2013
    Last edited by a moderator: Sep 7, 2017
    The other night I randomly typed in Ferrari 308 in my local CL listings and found a set of 16 inch Compomotive TS wheels. They've been sitting for years in a garage north of boston. I just find it funny because I've been searching for these on the forums for 2 years, and they just randomly popped up on CL of all places. Wish they were 17's but they'll do since the pricing was very, very cheap :)

    I plan on taking them apart and refinishing the face in a lighter silver. Also polish up the lip and order up some new wheel bolts. The only issue I have, is that she could only find one of the center caps. So if by any chance someone has a few laying around, please pm me!

    I'll post up the results on this thread later this fall.
    Image Unavailable, Please Login
    Image Unavailable, Please Login
     
  2. i-velocita

    i-velocita F1 Rookie
    BANNED

    Sep 9, 2006
    2,520
    Colorado
    Full Name:
    James
    #2 i-velocita, Sep 6, 2013
    Nice find Mike!
     
  3. 308steve

    308steve Formula Junior

    Sep 5, 2010
    306
    #3 308steve, Sep 6, 2013
    If and when you disassemble the wheels, don't lose the bolts and be very careful when you re-torque them - they will snap! --- I got lucky and found a dozen direct from Compomotive last year and I think I got all they had.
     
  4. woody6

    woody6 Karting

    Mar 9, 2009
    117
    Madison, AL
    Full Name:
    Robert B.
    #4 woody6, Sep 6, 2013
    Beautiful, I'm envious! But have you fitted them to the car? It could be the way they are made, but the offset appears wrong to me for a 308 (relative to my BBS wheels which are fairly deep dish on the rears). Regardless, it sounds like the deal of the century.

    --Woody
     
  5. wax

    wax Five Time F1 World Champ
    Lifetime Rossa

    Jul 20, 2003
    52,497
    SFPD
    Full Name:
    Dirty Harry
    #5 wax, Sep 6, 2013
    Last edited by a moderator: Sep 7, 2017
  6. 308gtsqv

    308gtsqv Formula Junior

    Feb 12, 2008
    610
    Mass/Cape Cod
    Full Name:
    Mike
    #6 308gtsqv, Sep 6, 2013
    Thanks guys! First thing I made sure to do was test fist them. They fit great. I know these were built to order and who ever ordered these originally was very conservative with the offset. I haven't measured them yet but it looks very close to stock at about a zero offset.
     
  7. 308gtsqv

    308gtsqv Formula Junior

    Feb 12, 2008
    610
    Mass/Cape Cod
    Full Name:
    Mike
    #7 308gtsqv, Sep 6, 2013
    Haha I actually paid less than that
     
  8. wax

    wax Five Time F1 World Champ
    Lifetime Rossa

    Jul 20, 2003
    52,497
    SFPD
    Full Name:
    Dirty Harry
    #8 wax, Sep 6, 2013
    Muahahaha! If you haven't already, you get to strut around like Pesci in Cuz Vinny.
     
  9. singletrack

    singletrack F1 Veteran

    Mar 16, 2011
    5,848
    Pittsburgh, PA
    #9 singletrack, Sep 7, 2013
    I actually think it's cooler that they are 16 personally. More unique and I personally prefer the look, although 17s look terrific as well.

    I like your refinishing scheme as well - should look great. Personally I would lose the center caps which will make the wheels look bigger and more aggressive. Not a look for everyone though...
     
  10. thecarreaper

    thecarreaper F1 World Champ
    Silver Subscribed

    Sep 30, 2003
    18,135
    Savannah
    #10 thecarreaper, Sep 7, 2013
    I think I have a full set of 4 wheel centers with Ferrari horsies, new in the wrap. Give me a few hours to put my hands on them and take pics for you.
     
  11. 308gtsqv

    308gtsqv Formula Junior

    Feb 12, 2008
    610
    Mass/Cape Cod
    Full Name:
    Mike
    #11 308gtsqv, Sep 7, 2013
    :)

    I like the look of them with out the caps too but up close they look a bit odd with out them.

    Wow that would be awesome! Thanks!
     
  12. 308gtsqv

    308gtsqv Formula Junior

    Feb 12, 2008
    610
    Mass/Cape Cod
    Full Name:
    Mike
    #12 308gtsqv, Sep 7, 2013
    Last edited by a moderator: Sep 7, 2017
  13. Jonny Law

    Jonny Law F1 Rookie
    Silver Subscribed

    May 6, 2008
    3,210
    Over yonder.
    Full Name:
    IT Guy
    #13 Jonny Law, Sep 8, 2013
    What if you just found a cap to fill the center hole?...
     
  14. carguyce750

    carguyce750 Rookie

    Mar 18, 2012
    4
    PA
    Full Name:
    Allen Stevens
    #14 carguyce750, Sep 8, 2013
    Available on superformance.com and not expensive.
     
  15. Vincent Vangool

    Vincent Vangool Formula 3

    Oct 6, 2007
    1,250
    Zanskar, Kargil district, Ladakh, India
    Full Name:
    Vincent Vangool
    #15 Vincent Vangool, Sep 8, 2013
    Pretty sure I like them better without the centers.
     
  16. Robz328

    Robz328 F1 Veteran
    Rossa Subscribed

    Mar 16, 2009
    6,299
    ATL, Georgia
    Full Name:
    Rob Hemphill
    #16 Robz328, Sep 9, 2013
    I've never seen anybody fist a wheel before:D.


    Nice find...enjoy.
     
  17. hanknum

    hanknum Formula 3

    Nov 1, 2003
    2,050
    Santa Barbara
    Full Name:
    Henry
    #17 hanknum, Sep 10, 2013
    Lucky...
     
  18. 308gtsqv

    308gtsqv Formula Junior

    Feb 12, 2008
    610
    Mass/Cape Cod
    Full Name:
    Mike
    #18 308gtsqv, Sep 26, 2013
    Last edited by a moderator: Sep 7, 2017
    Started to disassemble the wheels. Interesting process. It seems they were previously painted at least twice. I have the paint stripper on them. The original finish looks great and they seemed to almost have a polished look to them. Going to play with that and see if that'll look better then repainting them silver. The lips require some wet sanding and polishing as well.
    Image Unavailable, Please Login
    Image Unavailable, Please Login
    Image Unavailable, Please Login
    Image Unavailable, Please Login
    Image Unavailable, Please Login
     
  19. 308gtsqv

    308gtsqv Formula Junior

    Feb 12, 2008
    610
    Mass/Cape Cod
    Full Name:
    Mike
    #19 308gtsqv, Aug 18, 2014
    Last edited by a moderator: Sep 7, 2017
    After almost exactly a year, I was able to source a set of centercaps from a shop in England. Compomotive no longer make them new. The center caps are super rare to find and crazy expensive for what they are. So those of you that have these wheels, DO NOT LOOSE THEM!

    The lips have all been sanded and are ready for a mirror polish. The centers are almost ready for paint. I just need to wash them all up and sand down 2 of them. Just need to buy the new hardware.

    I'll post more photos after paint and the reassembly.
    Image Unavailable, Please Login
    Image Unavailable, Please Login
     
  20. ztarum

    ztarum Formula 3

    Mar 30, 2008
    1,302
    South Jersey, USA
    #20 ztarum, Aug 18, 2014
    Looks great!
     
  21. electrogunner

    electrogunner Formula Junior

    Sep 2, 2013
    322
    Amish country PA
    Full Name:
    Joe
    #21 electrogunner, Aug 18, 2014
    Great find!!!!

    You lucky dog :)

    Sent from my DROID RAZR
     
  22. i-velocita

    i-velocita F1 Rookie
    BANNED

    Sep 9, 2006
    2,520
    Colorado
    Full Name:
    James
    #22 i-velocita, Aug 18, 2014
    Big improvement!
     
  23. 308gtsqv

    308gtsqv Formula Junior

    Feb 12, 2008
    610
    Mass/Cape Cod
    Full Name:
    Mike
    #23 308gtsqv, Oct 16, 2015
    Last edited by a moderator: Sep 7, 2017
    Well after 2 years, I still haven't had the time to finish these. I've made progress but between a new born and starting my own company last year finding a few hours seems to be impossible.

    Also looks like I may be selling the car soon. So these are going to be up for sale. Feel free to PM me if your interested. I also have all new hardware. The center faces and center caps just need to be painted and the wheels reassembled/resealed.
    Image Unavailable, Please Login
    Image Unavailable, Please Login
    Image Unavailable, Please Login
     
  24. P4AntonLM

    P4AntonLM Karting

    Dec 31, 2007
    156
    Austria
    Full Name:
    Anton Schicho
    #24 P4AntonLM, Oct 16, 2015
    How much?
     
  25. 308gtsqv

    308gtsqv Formula Junior

    Feb 12, 2008
    610
    Mass/Cape Cod
    Full Name:
    Mike
    #25 308gtsqv, Oct 16, 2015
    PM sent
     
Page 1 of 2

Share This Page