Bought a LED rear light cluster conversion kit

I have just bought a LED rear light cluster conversion kit.
It replaces all standard bulbs to LED lights.

The company Scud Ing Swiss | Home Page | ScudIng.ch are currently offering a kit for the F430 rear lights but are also working on other models such as 360, 550 etc.

Below are some pictures of the kit.

I will hopefully be installing it over the weekend family commitments provided!
Image Unavailable, Please Login
Image Unavailable, Please Login

 

Interested to see the results! Sounds like a great upgrade.

 

Stef finally knocking these out huh, looks like a very professional piece of kit. Expected nothing less from Stef

 

Will be watching to see how these turn out. Anyone know the cost for this kit in U.S. dollars?

 

Stef has put in an incredible amount of time and effort into the R&D for this kit. I'm getting one as we speak btw (I know Tio, I'm late again). Then again Stef is known also for is OCD when it comes to getting things right.

 

I installed these same bulbs around a year ago in my Scuderia. The stock bulb burned randomly due to heat. LED run cooler and light up brighter for tail lights and stop lights.

Waiting for a kit I ordered last week to convert the front angel eyes out of their ugly Yellow.

 

Please post pics when installed.

Thanking you in advance!!!

 

Looking at the conversion rate, comes to about $625

 

Planning to install them over the weekend.
I will post some pictures once its done.

I believe the 360 is next in the pipeline.

 

cant wait for comparison pics

 

Looking forward to this, am likely to get a set

 

Hi guys

I have managed to install them yesterday.
It took me less that 90 minutes and 2 cups of coffee and a pepsi max and I am by no means an expert.
The procedure was straight forward and just a simple swap.

Here are some comparison pictures.
The LED bulbs are on the right side of the car.
It is visible that they are brighter but in real life the purity, clarity and brightness of the lights is so much more vivid.

Pictures don't do it justice.

I have a small video clip as well but I seem to have trouble uploading it.
Image Unavailable, Please Login
Image Unavailable, Please Login

 

Hope you can see this video clip.
It shows the comparison so much better.
View attachment jpeg led lights.MOV

 

Why wouldn't anyone just switch the bulbs for these (and add the resistor to stop rapid turn signal flashing)?
Stop, turn, and rear bulbs.
1157 LED Bulb - Dual Intensity 18 SMD LED Tower | LED Brake Light, Turn Light and Tail Light Bulbs | LED Car Bulbs | Super Bright LEDs
Reversing light bulbs
1156 LED Bulb - Single Intensity 18 SMD LED Tower | S series | Specialty & Automotive | Universal LED Bulb Finder | Super Bright LEDs
Turn signal bulb resistor
Tail Light Load Resistor Kit | LED Replacement Bulbs for Cars | 12v | Super Bright LEDs
Total cost $194 plus shipping.

 

Kudos to your sleuthing out a low cost solution! We need more guys like you!
Great idea if you are in pursuit of an LED setup for the sake of the LED. I was under the impression that guys were after the "effect" of a radial "halo" which means that the substrate that the diodes are on would be circular and a circular array on one plane was the goal. If there are no brainer locations, no drilling, to mount the resistors I could be tempted to try but why bother?


...and Harry, I love your license plate!!!!
Image Unavailable, Please Login
Image Unavailable, Please Login

 

I have the Scud ing kit but mine keeps the 4 lamps on.
Looks great!!!

 

I have recently (last year) updated every single bulb on the car to LED and installed the resistors where necessary. That said, I am tempted by Steffs kit as it illuminates all lenses which is how I think it should be.

 

+1. The four lenses illumination just look so fitting.