Extremely Early 308GTS with Metal Side Louvres? | FerrariChat

Extremely Early 308GTS with Metal Side Louvres?

Discussion in '308/328' started by ExcelsiorZ, Sep 9, 2013.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. ExcelsiorZ

    ExcelsiorZ Formula 3
    BANNED

    Nov 7, 2003
    1,267
    Beverly Hills
    There is an early 308 GTS getting a cosmetic going over at a local shop. It's engine model and number is F106AE *0004*

    I'm gathering this is the fourth engine ever built of this run?

    The thing I have never seen before is what are normally plastic side louvers, the louvres that cover the rear quarter glass and gas filler, are actually beautifully made of metal.

    Has anyone seen this before?
     
  2. singletrack

    singletrack F1 Veteran

    Mar 16, 2011
    5,805
    Pittsburgh, PA
    78 GTS - metal here. Yes they are beautiful. I was not aware of them changing to plastic.
     
  3. Dr Tommy Cosgrove

    Dr Tommy Cosgrove Three Time F1 World Champ
    Owner Rossa Subscribed

    May 4, 2001
    36,407
    Birmingham, AL
    Full Name:
    Tommy
    My 84 GTS is plastic
     
  4. Meister

    Meister F1 Veteran
    Silver Subscribed

    Apr 27, 2001
    5,516
    Duluth, MN
    Full Name:
    The Meister
    my ex 308 which was the second GTSi for MY 1980 was plastic
     
  5. don_xvi

    don_xvi F1 Rookie

    Nov 1, 2003
    2,934
    Outside Detroit
    Full Name:
    Don the 16th
    My 78 has aluminum louvers, also. I've always assumed the all black louvers I saw on later cars were just anodized everywhere.
     
  6. Dr Tommy Cosgrove

    Dr Tommy Cosgrove Three Time F1 World Champ
    Owner Rossa Subscribed

    May 4, 2001
    36,407
    Birmingham, AL
    Full Name:
    Tommy
    sounds like it was something else changed for the 80 model year onward along with everything else
     
  7. Wilson308

    Wilson308 Formula Junior

    Apr 27, 2012
    635
    Arkansas, USA
    Full Name:
    Wilson
    Don't think I've seen that, my 84 Euro has plastic but the edges are silver.

    Are the metal ones anodized, and do they fade over time like the emblems?
     
  8. Dr Tommy Cosgrove

    Dr Tommy Cosgrove Three Time F1 World Champ
    Owner Rossa Subscribed

    May 4, 2001
    36,407
    Birmingham, AL
    Full Name:
    Tommy
    I am going to start paying more attention to this little detail from now on
     
  9. DANCER308

    DANCER308 Formula Junior

    Oct 24, 2009
    935
    KY
    Full Name:
    Dan
    '79 GTS, plastic.
     
  10. singletrack

    singletrack F1 Veteran

    Mar 16, 2011
    5,805
    Pittsburgh, PA
    Yes anodized. They are a touch faded on mine, but not nearly as bad as say the trim which has more of a purple-ish hue to it after 35 years. Honestly, when I cleaned them up they looked almost new.
     
  11. vaccarella

    vaccarella Formula 3

    Apr 16, 2011
    2,291
    Full Name:
    Paul
    Mid 1980 & plastic here. I wonder if this change was at the same time as the move from vertical console dials for clock & oil temps to horizontal. Mine are horizontal.
     
  12. nerofer

    nerofer F1 World Champ

    Mar 26, 2011
    12,083
    FRANCE
    You must be kidding, Paul, that would be way too easy and logical...
    And now we have another riddle to decipher.

    Rgds
     
  13. tazandjan

    tazandjan Three Time F1 World Champ
    Lifetime Rossa Owner

    Jul 19, 2008
    39,160
    Clarksville, Tennessee
    Full Name:
    Terry H Phillips
    #13 tazandjan, Sep 10, 2013
    Last edited by a moderator: Sep 7, 2017
  14. Bullfighter

    Bullfighter Two Time F1 World Champ
    Lifetime Rossa Owner

    Jan 26, 2005
    22,594
    Gates Mills, Ohio
    Full Name:
    Jon
    I want that car!!!
     
  15. Dr Tommy Cosgrove

    Dr Tommy Cosgrove Three Time F1 World Champ
    Owner Rossa Subscribed

    May 4, 2001
    36,407
    Birmingham, AL
    Full Name:
    Tommy
    1980 was the only year for the vertical dials. They went side by side in 81

    That looks so much better too. I have always wondered why on earth they didn't just do that to begin with when they moved them over there in 80
     
  16. Owens84QV

    Owens84QV F1 Rookie

    Oct 2, 2001
    4,486
    Somewhere in NC
    Full Name:
    Greg
    Can someone post the P/N's for the alum metal side louvers?
     
  17. vaccarella

    vaccarella Formula 3

    Apr 16, 2011
    2,291
    Full Name:
    Paul
    They went side by side in 1980 Tommy. Maybe mine was the first to go that way. Who knows. But definitely 1980. It seems they made the decision pretty quickly; there must have been complaints that it was ugly.
     
  18. vaccarella

    vaccarella Formula 3

    Apr 16, 2011
    2,291
    Full Name:
    Paul
    You are right. Whilst not Kanban in the factory circa 1980, they would certainly have had some reasonably logical stock-use procedures. They would limit waste by installing all the ones they had left in the parts bin before moving to the new designs.
     
  19. Dr Tommy Cosgrove

    Dr Tommy Cosgrove Three Time F1 World Champ
    Owner Rossa Subscribed

    May 4, 2001
    36,407
    Birmingham, AL
    Full Name:
    Tommy
    It was only the 1980 model year I promise. They moved the two instruments over from your left knee where they had been since the beginning. 1980 was the first year for injection and that brought a bunch of other changes (seats, etc) - and the dial relocation. Only in 80 did they stack them on top of one another on the front of the console. Beginning in 81 and from there on they were side by side on the console.

    What is your chassis # ? Perhaps it is a later 80 model when things were in crossover on the assembly line. That happens from time to time.
     
  20. cavallo_nero

    cavallo_nero Formula 3

    Nov 3, 2003
    1,707
    colorado
    Full Name:
    Giovanni Pasquale
    my car, 78 Euro GTS, plastic louvers....
     
  21. i-velocita

    i-velocita F1 Rookie
    BANNED

    Sep 9, 2006
    2,520
    Colorado
    Full Name:
    James
    Early 80gtsi, plastic.
     
  22. bland

    bland Karting

    Jan 1, 2013
    122
    Oregon
    Full Name:
    Tim Bland
    My 78 GTS has metal.
     
  23. nerofer

    nerofer F1 World Champ

    Mar 26, 2011
    12,083
    FRANCE
    Same as the change from Konis shocks to Bilsteins for the late-models 328s: that one still eludes me! There is a service bulletin saying that from car "79xxx" Koni shocks are replaced by Bilsteins, except that you still find Konis on some cars until the end of the 328 production, and Bilsteins on some others, without any logic by markets (Euro vs US) or by model (GTB vs GTS)...Grrrrrrr!

    Rgds
     
  24. vaccarella

    vaccarella Formula 3

    Apr 16, 2011
    2,291
    Full Name:
    Paul
    That the verticals were in 1980 I don't doubt. But the switch to horizontal was also in 1980, just later in the year.
     
  25. Dr Tommy Cosgrove

    Dr Tommy Cosgrove Three Time F1 World Champ
    Owner Rossa Subscribed

    May 4, 2001
    36,407
    Birmingham, AL
    Full Name:
    Tommy
    probably so
     

Share This Page