Ferrari toolbox (never before seen & for good reason)

What kind of fool would do something like this? But seriously, it took only 10 minutes...
Image Unavailable, Please Login

 

I don't see anything particularly criminal... no big deal in my book if it makes the owner happy

I kind of like it actually. would be better if the boxes were red!

Jedi

 

To be true to the marque, along with adding badges you must make all the drawer handles sticky.

 

it's a fake, a fake, OMG it's a fake

 

Is that box Tony's?

He gonna fix it again?

 

Im not sure...but I think that Tool box has had some paint work!!

Mods please put in "storied tool box" section!

 

All I wanna know is how often you have to change the drawer belts?? If Ferrari had only gone with bearings like every other manufacturer it wouldn't be an issue.

 

I would guess those 3 chrome "FERRARI" plates only cost the fool about $500 to $800 apiece!

 

Well if it were a REAL toolbox,it would have chains instead of those pesky belts!

 

Are the leather draw liners shrinking and pulling away from the edges?

 

<just spit coffee out of my nose>

 

Drawer Belts were changed within the last 1 mile but that was back in 1998...

 

Paint looks to be of the same quality as the car. That toolbox needs some shields too, but only if it services race cars.

 

It does not have shields, resale is worthless without shields, nobody will ever buy it from him hope he likes it a lot it is sale proof without shields. Where is the carbon fiber upgrade? Does it come with a challenge grill and stripe package?

 

Just noticed that the height of that box is the same as a 599!

 

I like it.

 

Don't even consider buying it without first getting a PPI. Check also to see if it has aftermarket casters.

 

Are you guys sure this isn't a Fiero?

 

What's the serial nu- oh, wait, never mind.

 

Nice but should have used Snap-on . They are red. LOL

 

I looked at that a few months ago on Fleabay, but it is still rolling on the original metric castors and I am concerned the rubber on them is hard to source these days. Anyone have a good source for replica 2 inch castor rims?

 

Problem is that you can't see the tools. THAT is what makes the brand. Now...if the drawers were glass you would have people taking pics of your tools, posing beside them and posting the pic on ebay, etc.

Of course...you also need to paint the tools red.

 

It has to be a replica, the guy who took the pictures forgot to take the original emblems out of the picture first! They did use a good donor though.

 

Only toolboxes that actually raced had shields. If it was just rolled around non-competitively, shields are for poseurs.

 

I hear the 2014 Edition will have a carbon fiber option...Alex