Where do I find a 308 engine block | FerrariChat

Where do I find a 308 engine block

Discussion in '308/328' started by proteng, Oct 12, 2013.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. proteng

    proteng Rookie

    Joined:
    Sep 22, 2008
    Messages:
    17
    Location:
    Sarasota, Florida
    Does anyone know where I might start to search for a used or new 308 GTS engine block? My car is a 1978 U.S. Model.

    Any advice would be greatly appreciated.

    Thanks!

    Tom
    [email protected]

    Ps. I'm not good at checking back here on FChat for a response, so please email me at [email protected]
     
  2. Turbopanzer

    Turbopanzer F1 World Champ

    Joined:
    Oct 2, 2011
    Messages:
    11,120
    Location:
    Under a bonnet
    Full Name:
    Panzer
    You might start in the 308/328 thread. Lot of people who know where stuff is.
     
  3. DesertDawg

    DesertDawg Nine Time F1 World Champ Silver Subscribed

    Joined:
    Jan 25, 2010
    Messages:
    93,273
    Location:
    The Desert
    Full Name:
    DesertDawg
    Nor, apparently, posting in the section that would be most likely to get you one.

    :D
     
  4. MK1044

    MK1044 Two Time F1 World Champ

    Joined:
    Nov 6, 2011
    Messages:
    21,149
    Location:
    NYC USA
    Full Name:
    Carmine
    It's nice to see that the guy is willing to put so much effort into this.
     
  5. Meister

    Meister F1 Veteran Silver Subscribed

    Joined:
    Apr 27, 2001
    Messages:
    5,516
    Location:
    Duluth, MN
    Full Name:
    The Meister
    If youare looking to rebuild your current engine, you might want to look into buying another running 308 and selll the current one. At $10-$15k for a rebuild and reinstall you would be ahead of the game to buy another car.

    If you are looking for just a block for art/deco/other purpose try soem of the ferrari salvage places you can find in a google search.

    T rutlands
    specialized italian recycling
    forza motorsports
     
  6. Turbopanzer

    Turbopanzer F1 World Champ

    Joined:
    Oct 2, 2011
    Messages:
    11,120
    Location:
    Under a bonnet
    Full Name:
    Panzer
    Wasn't there one in the "Epic Rack " thread???? Or was that in the "complete bottom ends" thread!!! :D
     
  7. DrStranglove

    DrStranglove FChat Assassin Owner Rossa Subscribed

    Joined:
    Oct 31, 2003
    Messages:
    31,497
    Location:
    Google Maps
    Full Name:
    DrS
    Pretty sure it was in the "Oiled Babes" thread. Since we all know it HAD to be COVERED in oil....!
     
  8. GrayTA

    GrayTA F1 World Champ Owner Rossa Subscribed

    Joined:
    Jun 25, 2006
    Messages:
    15,130
    Location:
    Deep South
    Full Name:
    PDG
    Why is this in BRL????




    PDG
     
  9. DesertDawg

    DesertDawg Nine Time F1 World Champ Silver Subscribed

    Joined:
    Jan 25, 2010
    Messages:
    93,273
    Location:
    The Desert
    Full Name:
    DesertDawg
    'Cause he's looking for a bare block?
     
  10. DrStranglove

    DrStranglove FChat Assassin Owner Rossa Subscribed

    Joined:
    Oct 31, 2003
    Messages:
    31,497
    Location:
    Google Maps
    Full Name:
    DrS
    It's funny cause I actually know where one is right now that the owner would let go for CCCHHHHEEEEEPPPP!!! You might even haggle him down to next to nothing just so his wife would shut up about the thing.

    But lord knows I'm not going to email him if he is too lazy to look at his own thread.
     
  11. Smiles

    Smiles F1 World Champ Lifetime Rossa Owner

    Joined:
    Nov 20, 2003
    Messages:
    16,674
    Location:
    Pittsburgh, PA
    Full Name:
    Matt F
    :)

    Moved!
     
  12. Dr Tommy Cosgrove

    Dr Tommy Cosgrove Three Time F1 World Champ Owner Rossa Subscribed

    Joined:
    May 4, 2001
    Messages:
    36,433
    Location:
    Birmingham, AL
    Full Name:
    Tommy
    Are you serious about this?
     
  13. P4AntonLM

    P4AntonLM Karting

    Joined:
    Dec 31, 2007
    Messages:
    156
    Location:
    Austria
    Full Name:
    Anton Schicho
    ebay: 390279666887

    good luck!
     
  14. spirot

    spirot F1 World Champ

    Joined:
    Dec 12, 2005
    Messages:
    15,118
    Location:
    Atlanta
    Full Name:
    Tom Spiro
    I have a 308 Engine Block ... willing to listen to offers...
     
  15. Crallscars

    Crallscars F1 Rookie

    Joined:
    Jun 7, 2006
    Messages:
    2,512
    Location:
    Bainbridge, GA
    Full Name:
    Douglas Crall
    How would it look as a coffee table?
     
  16. smg2

    smg2 F1 World Champ Sponsor

    Joined:
    Apr 1, 2004
    Messages:
    16,338
    Location:
    Dumpster Fire #31
    Full Name:
    SMG
    maybe it's me but I don't think the 308 block would look all that great as one, now the TR block, that gets my vote!.

    I've got loads of 308pistons and rods laying around, couple cranks too, I've thought of taking and assembling them sans block and using that as coffee table base, flat crank on the ground pistons holding the top. problem is, it's far heavier then the block bare.
     
  17. Crallscars

    Crallscars F1 Rookie

    Joined:
    Jun 7, 2006
    Messages:
    2,512
    Location:
    Bainbridge, GA
    Full Name:
    Douglas Crall
    That would make a great looking table, maybe 4 pistons as feet, and 4 to hold the glass
     
  18. Dr Tommy Cosgrove

    Dr Tommy Cosgrove Three Time F1 World Champ Owner Rossa Subscribed

    Joined:
    May 4, 2001
    Messages:
    36,433
    Location:
    Birmingham, AL
    Full Name:
    Tommy
    what year?
     
  19. GrayTA

    GrayTA F1 World Champ Owner Rossa Subscribed

    Joined:
    Jun 25, 2006
    Messages:
    15,130
    Location:
    Deep South
    Full Name:
    PDG

    Werent the blocks all pretty much the same - the difference being the intake manifolds and heads?? I am sure there is something I missed there, but thats the idea right??




    PDG
     
  20. BigTex

    BigTex Seven Time F1 World Champ Owner Rossa Subscribed

    Joined:
    Dec 6, 2002
    Messages:
    79,380
    Location:
    Houston, Texas
    Full Name:
    Bubba
    Nope...wet sump vs. dry sump.

    QVs vs 2 valve, etc.

    Good luck to the OP.

    What year s the one you cite, Dr. S??
     
  21. Speedmade

    Speedmade Formula Junior Rossa Subscribed

    Joined:
    Jul 31, 2004
    Messages:
    387
    Location:
    Minneapolis, MN
    Full Name:
    Reed H
    Last edited by a moderator: Sep 7, 2017
  22. Crallscars

    Crallscars F1 Rookie

    Joined:
    Jun 7, 2006
    Messages:
    2,512
    Location:
    Bainbridge, GA
    Full Name:
    Douglas Crall
    There you go, a coffee table with a foot rest
     
  23. spirot

    spirot F1 World Champ

    Joined:
    Dec 12, 2005
    Messages:
    15,118
    Location:
    Atlanta
    Full Name:
    Tom Spiro
    85 QV block.

    I dont have a place to make it into a table .... but it would be cool
     
  24. spirot

    spirot F1 World Champ

    Joined:
    Dec 12, 2005
    Messages:
    15,118
    Location:
    Atlanta
    Full Name:
    Tom Spiro
    Mine is just the block - not the transfer case... or the bottom drive gears... but looks cool
     
  25. DrStranglove

    DrStranglove FChat Assassin Owner Rossa Subscribed

    Joined:
    Oct 31, 2003
    Messages:
    31,497
    Location:
    Google Maps
    Full Name:
    DrS
    Yes. Why would I make up something like this for a fellow member that does not even bother to check his posts?
     

Share This Page