Can someone post an under engine picture? | FerrariChat

Can someone post an under engine picture?

Discussion in '365 GT4 2+2/400/412' started by bjwhite, May 3, 2014.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. bjwhite

    bjwhite F1 Rookie Silver Subscribed

    Joined:
    Mar 17, 2006
    Messages:
    4,806
    Location:
    Seattle, WA
    Full Name:
    Brian White
    Can someone post a few pictures of the underneath engine bay area with the car on a rack? I am attempting to correct some Mickey Mouse coolant hose routing...just underneath the front of the engine. I can't quite make out what is should be from the parts breakout.

    http://www.trutlands.com/tav_main.php?tav=400i_18


    I have some strange two curved down hoses that stick down below the engine bay...you can see it easily just be looking under the car which puts them in danger of being damaged by road debris or uneven surfaces.

    I suspect the wrong hoses were used, so I'm going to correct that. Any pictures would be appreciated.
     
    bjwhite, May 3, 2014
    #1
  2. bjwhite

    bjwhite F1 Rookie Silver Subscribed

    Joined:
    Mar 17, 2006
    Messages:
    4,806
    Location:
    Seattle, WA
    Full Name:
    Brian White
    I think this is where my mickey mouse situation is.

    What is the difference in these two setups per the parts catalog? One on the right being a simple T and the one on the left being a bit more complex? 5-speed vs auto?
    Image Unavailable, Please Login
     
    Last edited by a moderator: Sep 7, 2017
    bjwhite, May 3, 2014
    #2
  3. Part Time

    Part Time Formula Junior Silver Subscribed

    Joined:
    Dec 16, 2013
    Messages:
    500
    Location:
    Port St. Lucie, Fl
    Full Name:
    Gary Shore
    Brian...see above post for oil cooler hoses for pic of under front of my dirty engine....

    Gary
     
    Part Time, May 3, 2014
    #3
  4. bjwhite

    bjwhite F1 Rookie Silver Subscribed

    Joined:
    Mar 17, 2006
    Messages:
    4,806
    Location:
    Seattle, WA
    Full Name:
    Brian White
    Last edited by a moderator: Sep 7, 2017
    bjwhite, May 6, 2014
    #4
  5. wrxmike

    wrxmike Moderator Moderator Owner

    Joined:
    Mar 20, 2004
    Messages:
    7,674
    Full Name:
    Mike
    The diagram below is of the heater hose connections at the top back of the motor, not what you're interested in.

    EG part 60 translates to "HEATER HOSE FROM LEFT TO THREE-WAY"
    and part 56 is "Heater Tap"

    Just because Ferrari printed it forward of the other items in the part book, doesn't mean that's where those parts are physically located in the vehicle. Ferrari where just using up empty space on the page.
    Image Unavailable, Please Login
     
    Last edited by a moderator: Sep 7, 2017
    wrxmike, May 6, 2014
    #5
  6. bjwhite

    bjwhite F1 Rookie Silver Subscribed

    Joined:
    Mar 17, 2006
    Messages:
    4,806
    Location:
    Seattle, WA
    Full Name:
    Brian White
    Thanks WRXmike. But does anyone have any idea on this tangled mess of hoses?
    I haven't had a chance to put it up on the rack yet....to get a better look.
     
    bjwhite, May 6, 2014
    #6
  7. bjwhite

    bjwhite F1 Rookie Silver Subscribed

    Joined:
    Mar 17, 2006
    Messages:
    4,806
    Location:
    Seattle, WA
    Full Name:
    Brian White
    So no one has an idea what this pretzel is?
     
    bjwhite, May 7, 2014
    #7
  8. wrxmike

    wrxmike Moderator Moderator Owner

    Joined:
    Mar 20, 2004
    Messages:
    7,674
    Full Name:
    Mike
    Last edited by a moderator: Sep 7, 2017
    wrxmike, May 7, 2014
    #8
  9. wrxmike

    wrxmike Moderator Moderator Owner

    Joined:
    Mar 20, 2004
    Messages:
    7,674
    Full Name:
    Mike
    Last edited by a moderator: Sep 7, 2017
    wrxmike, May 7, 2014
    #9
  10. Al Campbell

    Al Campbell Formula Junior Owner Silver Subscribed

    Joined:
    Nov 22, 2013
    Messages:
    581
    Location:
    Australia
    Last edited by a moderator: Sep 7, 2017
    Al Campbell, May 7, 2014
    #10

Share This Page