New: 1958-1965 Maserati 3500 GT Trunk Material

Hello to all, as some of you know I've been working on reproducing the trunk/boot material for the 3500 GT. It's has taken some time to get it done. The first article prototype is pictured, NOT the finished product.

***NOTE: The photo is a scan and actually makes the material look "darker" and "grainier" than the actual item. ****

Right now, we are making new dies that will not have raised grain in the "square" sections. The final product will be "shiny" and have a gloss finish as the original. Also, the final product will be "cushioned, or pillowed", as the original.

I just wanted to give you all an update! I should have it completed by mid June, if all goes as planned.

Send me a PM or note if you are interested.

Ciao and best!

~Trev


P.S. I am working on reproducing 3500 GT shift nobs as we speak.
Image Unavailable, Please Login

 

Looks good Trev. Count me in for some, if it is as good as it looks in the photos
Ciao,
FGM

 

Hi Trev,
Count me in, let me know when ready....Omar

 

Frank, you are first on the list.

The material looks better in person.

When we have the material finalized it will look perfect.

Ciao and best!

~Trev

 

Will do Omar!

I will keep you informed.

What 3500 GT to you have???

Ciao and best!

~Trev

 

Hi 3500 GT,

I need that trunk material too.
Count me in.
Keep me informed.

Greetings from holland.

Smyslow 18

 

Hi Trev,

I have 1964 3500gti, vin#2244

 

I will take enough for two cars. Thanks. Nsh.

 

I am new to the forum. Have a 1963 3500GTI #2612 and would lilke to contact you to get some trunk material. How can i reach you? Thanks. Tlarson

 

Hello to all, and thank you to everyone for your interest and patience in the 3500 GT/GTI trunk Material. It has taken longer than expected to manufacture but it is here.

I have the first run completed and enough for about 5 cars.

I am currently refining and making new dies to get the material to have the correct "shine" as the first run didn't come out as I had hoped, but it's the closest to the original you will find.

The second run won't be available for about 3 to 4 months, as it's a long process for perfection. I hope to finish the new die as soon as I am able and then I'll have more available.

For those who would like the first run material send me a private message and I'll get back to you.

Ciao and best,

Trev
Image Unavailable, Please Login
Image Unavailable, Please Login
Image Unavailable, Please Login
Image Unavailable, Please Login

 

Hi Trev,

I am new to FerrariChat. I came across this forum while searching for trunk liner material for my '63 3500 and saw your posting. Have you had success with the second run?

Thanks

Martin

 

PM sent.

Ciao and best!

 

Hi,
I am also interested in your trunk material (2 cars). Can you please let me know the current status of development.
Thanks & regards,
Matthias

 

PM sent.

 

Hi Trev,
I'm new to this forum/list and also very interested in this truck material for RHD #1224 in Australia. Can you please let me know?
Great job in making this a reality.
Thanks, Peter

 

Trev,

Would love to see a sample when ready. For the most part, my original trunk material is complete but. . . .

Best and thanks for taking on this important task!

Alan

 

Hi Trev, is the trunk material available? I would like a piece for 1 car. Dalin


Sent from my iPad using Tapatalk

 

Hello Dalin,

Thanks for the inquiry. The second run is almost finalized. The die is finished. Production will begin soon.

Check your F-chat inbox, I'll send you a PM.

Ciao and best!

~Trev

 

Hello, Trev.
I have a 1960 3500. Are you still making the material?
bill
my email address is: [email protected]

 

Hi Trev,
Still interested as well, tried to PM a while ago.
[email protected] is my email

Thanks a lot,

Dalin


Sent from my iPhone using Tapatalk

 

I think we are all interested in the trunk material. Can you keep us posted please.
Thanks, RF.

 

Could you put me down for a set as well for 1292
Keith

 

Interested as well for 0028. Thx! Toby.

 

Hello Trev,

I'm extremely interested in buying a length of your trunk fabric for my 3500 101/1128 which i'm delicately repairing/restoring (you can find an article about my approach in February's Octane magazine).

Can you please supply a quote? I'm probably going to need a complete refit though I intend to use certain sections of the existing lining for as long as possible.

Best wishes,

Kevin McCloud

 

Put me down for a set for my beloved 1128

And congratulations for persevering with this. You do us all a great service.

Kevin